Debian On Pdaxrom

[Chero]

Xlib: connection to "127.0.0.1:0.0" refused by server
Xlib: No protocol specifiied

Error: Can't open display!

Hi,

it seems the X server refuses to accept your chrooted Debian X client...

Try to copy again the .Xauthority file from your pdaXrom home to your chrooted debian home and see if it changes something...

Otherwise, try a brutal "xhost +localhost" from the pdaxrom enviroment (this should open the X server to any connection originated from your own machine, which isn't good as an Xauthority file but for testing purposes it should do...).

Hope this can help!

Bye,

Andrea
[div align=\"right\"][a href=\"index.php?act=findpost&pid=60148\"][{POST_SNAPBACK}][/a][/div]

Hello,

I'm trying to get debian working on my pdaxrom. So far, I can chroot to the /#. Everytime I run Aterm I get the following Error:

Xlib: connection to "127.0.0.1:0.0" refused by server
Xlib: No protocol specified

GTK-WARNING **: cannot open display: 127.0.0.1:0


I've following the guides that have been posted as best as possible, but the only one I haven't tried is try a brutal "xhost +localhost" from the pdaxrom enviroment, not sure how to do this. Can someone explain the steps required to do a brutal "xhost +localhost".

Thanks,

VirtusRex
[div align=\"right\"][a href=\"index.php?act=findpost&pid=142724\"][{POST_SNAPBACK}][/a][/div]

Before getting "brutal", copy the .Xauthority file to .../debroot/root and .../debroot/home/root.
This always worked for me.

Chero

[zeigerpuppy]

Unfortunately the openoffice.org-bin_1.1.4-1_arm.deb is missing currently,
people.debian.org/~rene/openoffice.org/test/arm/ seems to be down.
Anyone got a copy?

Really looking forward to trying OO!

[jocasmi]

I got the same need   . Did you get some luck looking for the file?  

[Chero]

I got the same need   . Did you get some luck looking for the file? 
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148417\"][{POST_SNAPBACK}][/a][/div]

I probably have it somewhere.
If you can give me a place to upload it (about 70Mb), I'll check it out.

Chero.

[Chero]

I got the same need   . Did you get some luck looking for the file? 
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148417\"][{POST_SNAPBACK}][/a][/div]

I probably have it somewhere.
If you can give me a place to upload it (about 70Mb), I'll check it out.

Chero.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148431\"][{POST_SNAPBACK}][/a][/div]

I have the .deb and the tar.gz files.

Chero.

[radiochickenwax]

I got the same need   . Did you get some luck looking for the file? 
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

I probably have it somewhere.
If you can give me a place to upload it (about 70Mb), I'll check it out.

Chero.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148431\"][{POST_SNAPBACK}][/a][/div]

I have the .deb and the tar.gz files.

Chero.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148477\"][{POST_SNAPBACK}][/a][/div]

I think the tar.gz is available from tyrannozaurus.com. [a href=\"http://www.tyrannozaurus.com/?q=node/77]http://www.tyrannozaurus.com/?q=node/77[/url]

At least, I've managed not to lose my copy yet, if that one's not it. Could someone please upload the .deb package to this thread? It should fit the 50MB restriction?

[Raul]

1) Edit /etc/debroot.conf to suit your tastes. You must set DEBROOT as appropriate (as usual) but you can disable (put a comment before it) some stuff like DEB_RUN_VNCSERVER, DEB_RUN_FBVNC, DEB_RUN_ZAPM_PROXY, DEB_RUN_ZAPMD. It's also useful to add a "DEB_DISPLAY" variable like: DEB_DISPLAY=127.0.0.1:0 (more on this later).

There is no such file after running postint.sh .

2) Remove the "-nolisten tcp" from /usr/X11R6/bin/startx (better, copy the line, comment the old one and change the copy)

There is no such file after running postint.sh .

Could anyone write a step by step instruction?

[Chero]

1) Edit /etc/debroot.conf to suit your tastes. You must set DEBROOT as appropriate (as usual) but you can disable (put a comment before it) some stuff like DEB_RUN_VNCSERVER, DEB_RUN_FBVNC, DEB_RUN_ZAPM_PROXY, DEB_RUN_ZAPMD. It's also useful to add a "DEB_DISPLAY" variable like: DEB_DISPLAY=127.0.0.1:0 (more on this later).

There is no such file after running postint.sh .

2) Remove the "-nolisten tcp" from /usr/X11R6/bin/startx (better, copy the line, comment the old one and change the copy)

There is no such file after running postint.sh .

Could anyone write a step by step instruction?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=162303\"][{POST_SNAPBACK}][/a][/div]

What is your base system ? These instructions are for debian on pdaXrom.

Are you looking for the files in your base system or in the debroot ? They should be in your base system.

Chero.

[Raul]

Thanks
I never thought that files will be in pdaxrom and not debroot.
I will check that

Kind regards,
Raul

[adf]

Ok--So I'm using pocketworkstation upgraded to etch on pdaxii13v2. with the backports repository I can have firefox2 and nvu, as I've said elsewhere. Everything works great...except that I'd like to be able to use the Fbvnc approach outside of X as well--mostly to zoom Nvu.  I can't seem to do this--I get a segfault line 65(I think) that says error fbvnc 127.0.0.1:1

Any ideas how this might be made to work?  I seem to recall eviljazz suggesting that the cachedfb feature in the pdaXrom kernel might have problems with fbvnc...

[climber]

@adf

I'm amused that pocketworkstation on pdaXii13v2 works. Which installation guide did you use for instlallation and configuration. I will do the same  
You told that you upgraded to etch on pdaxii13v2. Do you installed it from scratch or did you use the internal upgrade function?

Thanks
climber


SL-C3100 pdaXii13v2

[dsteuer]

Ok--So I'm using pocketworkstation upgraded to etch on pdaxii13v2. with the backports repository I can have firefox2 and nvu, as I've said elsewhere. Everything works great...except that I'd like to be able to use the Fbvnc approach outside of X as well--mostly to zoom Nvu.  I can't seem to do this--I get a segfault line 65(I think) that says error fbvnc 127.0.0.1:1

Any ideas how this might be made to work?  I seem to recall eviljazz suggesting that the cachedfb feature in the pdaXrom kernel might have problems with fbvnc...

I had the same problem of a seg-faulting fbvnc (don't remember the exact error message) . Following the hint on http://zaurusfun.4t.com/index.html I installed
http://www.pocketworkstation.org/files/fbvnc-arm-1.4.gz instead of the included fbvnc.

Worked here for C860 on pdaXrom beta 1 + pdaxrom-custum.tgz.

Hth
detlef

[adf]

Wasn't paying attention-- sorry.

I used the install instructions from this thread if I remember corectly--basically I made a debroot dir in /usr (which is on the md in pdaxii13) and did the usual PW install stuff.  My upgrade was done internally --I started zdebian,did apt-get update/upgrade, changed repos to etch rebooted and did ti again--and bingo! etch on my Z.

Now I need to try that fbvncserver--it would be handy to be able to zoom around occasionally

[adf]

editing zvncserver soit looks like this has helped--not quite there yet, but hopeful


# Run the VNC server in the background
Xvnc -geometry $GEOMETRY \
        -fp /usr/share/fonts/X11/misc \
        -co /usr/share/X11/rgb \ # Leave off .txt
        -depth 16 -pixelformat RGB565 \
        $AUTH $EXTRA_SERVER_ARGS \
        $DISPLAY &

Ok,got it.

It needs the fbvnc 1.7 (not 1.71) untar and copy into pdaxrom usr/local/bin  -- or someplace else
and to launch manually
Vncserver
fbvnc -hw c700 localhost:0 (I changed the scripts to display 0 instead of the default 1 as a result of a misunderstanding)

haven't tried Fbvnc yet