Bluetooth On 2.6.24.4-yonggun?

[Shem]

Hey all!

I'm searching and trying for a few days now, and I'm at the point of giving up..

When I insert my bluetooth CF card Anycom LSE139 (CF-300), nothing is reconized. Dmesg only says:

Jan  4 03:32:42 zaurus kernel: pccard: PCMCIA card inserted into slot 1
Jan  4 03:32:42 zaurus kernel: pcmcia: registering new device pcmcia1.0

Hciconfig gives me nothing.

Pccardctl ident 1 does give me info about the card.
I (re)loaded /etc/init.d/bluetooth a 1000 times

Manually entering "hciattach /dev/TTYS0 ericsson" does work, but the output of "hcitool dev" stays empty.

Anyone, tips please ?

[Shem]

VERY strange: I've got bluetooth "working", that is, hcitool scans for macaddresses, and finds 3. That ok. But the thing is, is displays the mac-addresses wrong. It randomly adds 00:02 of 00:01 before the mac, and substracts the last 2 octets. Ofcourse, "hcitool name xx:xx:xx:xx:xx" gives me nothing. But when I enter the right mac (learned from another PC), it can find all the info..

Any idea anyone? I have to load bluecard_cs manually to enable my card.. Maybe not compatible with the kernel or something?

Please help me out ..

[Shem]

Thanks for all the reply's

Found out that more wasn't working (nmap, ettercap, etc). Seems like a kernel problem, tried zdevils rootfs + older kernel and everything worked out of the box..

[olipage]

VERY strange: I've got bluetooth "working", that is, hcitool scans for macaddresses, and finds 3. That ok. But the thing is, is displays the mac-addresses wrong. It randomly adds 00:02 of 00:01 before the mac, and substracts the last 2 octets. Ofcourse, "hcitool name xx:xx:xx:xx:xx" gives me nothing. But when I enter the right mac (learned from another PC), it can find all the info..

Any idea anyone? I have to load bluecard_cs manually to enable my card.. Maybe not compatible with the kernel or something?

Please help me out ..

hey,

what did you do to get it working, i have similar problem running 2.6.24 - but i did not succed in getting it to the point you did.

i have another card, using the same chipset, but have already tried to bind to bluecard_cs.

thanks a lot for your info...

'Oliver

[Shem]

Well, the only solution for me was to change to another kernel, couldnt get it to work with the 2.6.24.4 kernel.

If I were you, I'd wait for the release of zubuntu 1.0, looks very promising..

http://www.omegamoon.com/blog/

[jeana]

Did you tried to install the pcmciautils package ?

I had a similar problem about cf card that wasn't recognized when inserted. Same dmesg, without the device detection. :

Jan 4 03:32:42 zaurus kernel: pccard: PCMCIA card inserted into slot 1
Jan 4 03:32:42 zaurus kernel: pcmcia: registering new device pcmcia1.0

And after the installation of the pcmciautils package everything was OK.