I've spent many days trying to get bluetooth to work under Ångström with an Anycom card that worked under OZ. Figured it out finally.
Bluetooth works under Ångström
Hey guys,
I ran over plenty of dicussions and info over bluetooth cf cards an angstrom. this post from 2007 was pretty positive on bluetooth, since i already tried various kernels, and chip sets. now i installed your kernel 2.6.20 but using my bt2000e card, which uses the serial_cs i couldn't get it working since i have no appropriate kernel-modules.
i just wonder, whether this patch (pdax-patch) has been excluded in the meantime from angstrom (kernel 2.6.26).
if so, i would not need to make any efforts to build the missing kernel-modules, because your solution would not work for me.
basically i have an already documented hciattach error, because my card using serial_cs, and 8250 (in angstrom 2.6.24 module 8250 actually gets loaded without error - in controverse to your solution mentioned above).
does any one have a running bt2000e card with recent angstrom?
i used hciattach with ericsson chip set and it worked without error, but hciconfig up retournes as already stated in discussions and howtos a timeout. i tried plenty of solutions, but before continueing i'd like to know whether someone has this card running on angstrom, if so, using which kernel.
my system recognizes the card properly and initializes needed modules. i tried manual modprobe, but hciattach did not succed, even though trying different setserial speeds, because this was an error in history.
thanks a lot
Oliver