Zocalo Web Feed Reader (sharp Rom)

[koan]

Edit: Oh yeah, and I forgot. It will not launch at all in portrate mode

Try changing to portrait mode before running the terminal program.

[xamindar]

Try changing to portrait mode before running the terminal program.

That gets rid of the error message but it still will not open in portrait mode. But it does work in portrait if I first open it in landscape and then switch qtopia into portrait.

[Frederic Bergeron]

Absolutely. Every time I tap the icon there is a refresh of the screen as if it tried to open for a split second and then nothing. Not running either.

I had a similar problem before with a different application.  Rebooting the Zaurus fixed it.  I don't know if it will work in your case but it doesn't cost much to try it out.

[koan]

It won't run from the icon in portrait mode for me; but if I rotate then run terminal I can run from the terminal (qkonsole). And I can run in landscape and then rotate. Very strange, but I can investigate and try to fix this.

I still haven't managed to trigger the unwanted -update all- though.

[xamindar]

I could never get version 1.7 to work properly. I tried removing all of my settings as well but it still will not start from the icon. In fact, it would not start at all, not even from the console, after I removed the settings and feed files as well. Get this error:

Code: [Select]

bash-2.05$ zocalo
Display size = 480x640
QGArray::at: Absolute index 0 out of range
I ended up sticking with the pre 1.7 version that you emailed me which still works just fine.

Regarding it trying to update on its own. The only way I can get it to do it is if I select update all and then disable the network connection while it is in the process. Then 50% of the time it will keep trying to do an update every 30 seconds or so until I have around 10 of the "do you want to continue updating" messages on the screen.

Hope any of this helps.

[jcabrer]

This looks like a missing configuration file, or missing parameters in that file.  Is it possible that you are using an old configuration, and are using it with the new version of the software?  If so, try movimg the config somewhere out of the way, and restart the program.  It migh shed some light.

[xamindar]

I could never get version 1.7 to work properly. I tried removing all of my settings as well but it still will not start from the icon. In fact, it would not start at all, not even from the console, after I removed the settings and feed files as well.

[koan]

Just a quick note to say that I haven't stopped working on this...

This looks like a missing configuration file

Thanks, but there is no reason for missing configuration to cause any of the problems that have been reported. Zocalo will not crash if you use old configuration files. In fact, it's something that I have to take into account whenever I change the config settings; that a user may be upgrading from a much older version.

The QGArray thing was my bad. Fixed for the next release.

I implemented some changes that may help prevent unwanted Update All, but as I never confirmed this problem I can't confirm that it will be fixed.

it will keep trying to do an update every 30 seconds or so until

It's trying to update each feed in turn and 30 seconds is the default timeout for network connections in the settings. If you hit No to the "Do you want to continue?" dialog it should have stopped those messages. I recently went through this code and don't remember fixing any problems, certainly the next release will stop.

There was a small bug that was revealed when starting in portrait mode, a simple assumption made back in the days of 1.0. I fixed it but now there are other problems... it doesn't make sense to me at all, the program crashes when starting in portrait mode but I can't find a cause. So this is what I am working on now.

[koan]

Finally, I am pleased to announce version 1.8 is now available.

After a lengthy period of bug chasing I have determined that the reason for the program not running in all orientations is somehow due to QPEToolBar/QPEMenuBar. This is bizarre, it certainly worked fine in all previous versions of Zocalo and I was using what I thought was a legal method. I have now changed to a different method of mixing toolbar and menus and it seems to work fine.

You can now use the Cancel button to navigate views, as was requested previously. You can "enter" views with the OK button and "exit" them with Cancel or by the old method of pressing and holding OK. If you press Cancel on the Feeds view you will exit the program.

I located and removed some memory leaks as well as other bugs and errant behaviours so I strongly recommend installing this new version.

Finally, anyone using Zocalo to follow a password protected Twitter timeline will have found that it doesn't work any more. Twitter have now changed to OAuth, http://blog.twitter.com/2010/08/twitter-ap...-and-oauth.html I am sure that cURL will support OAuth soon, when it does I will make a new cURL ipk and Twitter support will then be available again.

[xamindar]

Great! Thank you! It seems to work great now. Will open in landscape and portrait mode for me now.

You can "enter" views with the OK button

Just a note, this has never worked for me. It's not really a big deal because I can just tap on the feed anyway. Just letting you know. Holding down the OK button does still exit a feed though as well as the cancel button you just addeed in. Thanks.

[koan]

Thanks, I can confirm that "OK" doesn't work on my 3200 too. I only tested on my 750. I will fix it shortly.

[koan]

Update: Zocalo 1.8.1 with OK button fix, tested on SL-C3200.

[MaBo]

Woow!! It works great with the OK and Cancel buttons. Now it is *REAL* great feed-reader.

Thanks,
MaBo (SL-C3100 on cacko 1.23)

[jakfish]

Many thanks for an intriguing application.  I'm having a hard time getting it started.  Using a C1000 and Trisoft ROM, per your website instructions, I've installed 1.8.1 and the libcurl-light_7, libidn_1 and libz_1 ipks.  However, in Terminal, using the command "zocalo," I get an error: "could not open translation file /home/QtPalmtop/il8n/en/libsl.qmid OGArray::at: Absolute index 0 out of range

If libsl.qmid is an actual file, I do not find it in /home/QtPalmtop/il8n/en

Any advice?

Thanks,
Jake

edit: I found a libsl.qmid at http://dragos.com/zaurus/ but I still get the error "OGArray::at: Absolute index 0 out of range"

[koan]

could not open translation file /home/QtPalmtop/il8n/en/libsl.qmid

It's the translation file for Sharp's libsl. You can live without it or install the file as you've done already. It's nothing to do with Zocalo.

OGArray::at: Absolute index 0 out of range

I suspect this is something that has been fixed already for 1.9. I was looking through the code when I found an issue that probably no one would ever be able to trigger. It looks like I was wrong. I'll try to release it soon and we'll see if it cures the error.