Author Topic: SailfishOS 3.0.1.11 released by Jolla  (Read 5834 times)

gabs5807

  • Newbie
  • *
  • Posts: 39
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« on: January 12, 2019, 07:35:15 am »
Hallo,
today i read at https://together.jolla.com/question/186471/...anet-computers/ that the SailfishOS Version 3.0.1.11 is released by Jolla (older versions came from Community).

At the link above there is a detailed description howto install it.
Third party licensed Software is not included, but landscape mode should work out of the box  .
 
I installed it per ssh and after having a short look on it everything worked fine  .
Amongst many other Computers and Phones i'm using a Gemini PDA WIFI+G4 and a Cosmo Communicator both with German keyboard, all with SailfishOS and Debian ;-)

FrankS

  • Newbie
  • *
  • Posts: 27
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« Reply #1 on: January 12, 2019, 11:12:04 am »
I wrote a shot message in the pinned "tips and tricks" thread 2 days before you can find here.
It is the version 3.0.1 Jolla is working on atm, still beta. Not released!
« Last Edit: January 12, 2019, 11:15:05 am by FrankS »

vader

  • Sr. Member
  • ****
  • Posts: 285
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« Reply #2 on: January 13, 2019, 05:15:52 am »
I can confirm that the instructions FrankS created work a treat. AFter playing with 3.0.1.11 for a bit, I can say it is a big improvement on 2.1.14.whatever . There are still some problems (headphones, hotspot) but there are some great improvements. The best ones are that landscape properly works now (no patch required), the camera focuses properly (although it is still pretty bad quality wise), and the web browser now supports webgl. This means I can now use the gemini to do my 3d printing on octopi as well a play a few webgl games  

The new drop down menu is actually useful and grows on you. It takes a little while to swap gestures (close the app by dragging down at the edge of the screen), but once you get the hang of it, it works well. The app gesture (up from the bottom) is also much improved. I used to get about 1 in 4 attempts bringing up the events window. Haven"t had a single one yet.

A lot of apps now work, even if they rotate strangely. The barcode reader now works for example. If the headphone issue - the speakers stay on when you plug in headphones - and the phone microphone (uses the one on the same side as the speaker and wont rotate) was fixed, it would be near perfect. Add in a working hotspot and we would be there.....

I have checked and my dosbox app still works on 3.x, so nothing needed there  Same with ffmpeg/ffplay.

One more thing - the performance seems faster. By that I mean the time to open apps, and general scrolling etc.
« Last Edit: January 13, 2019, 05:19:59 am by vader »

epninety

  • Newbie
  • *
  • Posts: 18
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« Reply #3 on: January 13, 2019, 05:32:16 am »
I broke my 3.0.0.8 install trying to upgrade last week, before these instructions were available. So I can confirm the instructions work just as well if applied to the 'standard' SFOS image from the Gemini website.

I note that from the 'desktop', the escape key works as a on-off as some others had wanted - I previously had to type Fn-Esc to switch off (which still seems more natural to me, but no complaints).
From inside apps like ToeTerm it doesn't switch off, so no loss of function there.
Also the silver button appears to work as on-off as well, so possibly/probably now works to answer calls as well?

vader

  • Sr. Member
  • ****
  • Posts: 285
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« Reply #4 on: January 14, 2019, 01:28:18 am »
It also appears that the reauth wifi bug for X25 (X27 was fixed a while back) has been fixed. I get much better battery life on wifi, and don't suffer stutters when ssh'ed in when the gemini screen is locked. Liking 3.0.1.11 more every day.

vader

  • Sr. Member
  • ****
  • Posts: 285
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« Reply #5 on: January 15, 2019, 04:44:32 am »
OK, I don"t believe I am going to say this, but the camera is almost usable now in 3.0.1.11!!! It still has pretty awful optics, but the focusing is much improved. Videos also work now. Videos (only 720p) are actually quite usable. I don"t know what they did, but the camera is basically usable now. Also works well as a barcode scanner.
« Last Edit: January 16, 2019, 10:40:34 pm by vader »

yoram

  • Newbie
  • *
  • Posts: 20
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« Reply #6 on: January 15, 2019, 03:46:57 pm »
If that is permitted (AFAIK it should be) can someone please share here the rpm files from the adaptation repositories ? I have problem accessing them with my jolla account
« Last Edit: January 15, 2019, 04:24:52 pm by yoram »

rasva

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
    • http://
SailfishOS 3.0.1.11 released by Jolla
« Reply #7 on: January 16, 2019, 01:20:52 pm »
Wow, seems that 4G calling works now. Surely was not in 3.0.0.8 in my case. Apart that I see some weird behaviour of the SD card. Sometimes disappears and is not readable. May be just coincidence and the card is dying after two months.

yoram: if you write me, where these rpm files are stored in the decice, I can share these.
Cosmo
Gemini 4G/SailfishX

In past: Zaurus SL-C3200, Jornada 728, 690, Mobilepro 900C, Sharp PC3100, HP 200LX....

yoram

  • Newbie
  • *
  • Posts: 20
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« Reply #8 on: January 16, 2019, 05:52:16 pm »
Quote from: rasva
Wow, seems that 4G calling works now. Surely was not in 3.0.0.8 in my case. Apart that I see some weird behaviour of the SD card. Sometimes disappears and is not readable. May be just coincidence and the card is dying after two months.

yoram: if you write me, where these rpm files are stored in the decice, I can share these.

first of all, thanks for trying to help
the rpm files are deleted after install so they are not founf on the device
they can, howeve, be downloaded by
pkcon download <package>

 the names of repository packages can be achived by command like
zypper pa | grep adaptation0

if downloading and sharing all of them is to much work I will understand....

easypda

  • Newbie
  • *
  • Posts: 1
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« Reply #9 on: January 17, 2019, 10:55:03 am »
Hi,

Thanks a lot for the tjc tutorial [Wiki] dealing with how to upgrade Sailfish from stock 2.1.4.14 to 3.0.1.11 EA edited on 2019-01-09. Very good job!
https://together.jolla.com/question/186471/...anet-computers/

However, I need your help, because the ?Device adaptation that's results after the upgrade is rev. 0.0.2.10 instead of 0.0.3.10 : so the landscape mode is not working, the keyboard is incorrectly mapped (some keys are not correctly affected), ...

I run the upgrade as described in the tutorial (3.0.0.8 -> 3.0.1.11), but :
- the two repos added with the command ssu ar adaptation-0 and -1 are located in the (user) Enabled repositories... instead of the (global) one
- the resulting adaptation1 URL? ended with armv7hl (witch seems to be correct)
- no need to delete the old repos (were well disabled and with their full URL)

To be complete, I upgraded from rev. 2.1.4.14 to 3.0.0.8 using the /devel:/ branch and not the /testing:/ one and the directories were fixed to sailfish_latest_%(arch) instead of sailfishos_(%release).
I did that in order the upgrade to run well (and the files are more fresh : 19/01/14 in the common directory) : because, using the /testing:/ and sailfishos_(%release) in the URL made, my GeminiPDA was unable to boot after the 2.1.4.14 to 3.0.0.8 upgrade.
The ?GeminiPDA is running well with the 3.0.0.8 upgrade ... but it’s 3.0.0.8!

I don't remember when, but the ssu command sometimes add the a < [D] unknown:0 - “No carrier” > line in his results : I don't know if it is a problem ?

When upgrading, I am not connected to any Jolla account on the device (also, no web page opened with a Jolla login) : I don't know if it's necessary (it's seems no, regarding some posts).

I hope someone could help me, as I tried to do the upgrade many times without success (using the tar archive to restore helpfully, from debian) and I am stuck to the 3.0.0.8 community version.

Thanks a lot!

yoram

  • Newbie
  • *
  • Posts: 20
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« Reply #10 on: January 17, 2019, 12:02:01 pm »
Quote from: easypda
Hi,

Thanks a lot for the tjc tutorial [Wiki] dealing with how to upgrade Sailfish from stock 2.1.4.14 to 3.0.1.11 EA edited on 2019-01-09. Very good job!
https://together.jolla.com/question/186471/...anet-computers/

However, I need your help, because the ?Device adaptation that's results after the upgrade is rev. 0.0.2.10 instead of 0.0.3.10 : so the landscape mode is not working, the keyboard is incorrectly mapped (some keys are not correctly affected), ...

I run the upgrade as described in the tutorial (3.0.0.8 -> 3.0.1.11), but :
- the two repos added with the command ssu ar adaptation-0 and -1 are located in the (user) Enabled repositories... instead of the (global) one
- the resulting adaptation1 URL? ended with armv7hl (witch seems to be correct)
- no need to delete the old repos (were well disabled and with their full URL)

To be complete, I upgraded from rev. 2.1.4.14 to 3.0.0.8 using the /devel:/ branch and not the /testing:/ one and the directories were fixed to sailfish_latest_%(arch) instead of sailfishos_(%release).
I did that in order the upgrade to run well (and the files are more fresh : 19/01/14 in the common directory) : because, using the /testing:/ and sailfishos_(%release) in the URL made, my GeminiPDA was unable to boot after the 2.1.4.14 to 3.0.0.8 upgrade.
The ?GeminiPDA is running well with the 3.0.0.8 upgrade ... but it’s 3.0.0.8!

I don't remember when, but the ssu command sometimes add the a < [D] unknown:0 - “No carrier” > line in his results : I don't know if it is a problem ?

When upgrading, I am not connected to any Jolla account on the device (also, no web page opened with a Jolla login) : I don't know if it's necessary (it's seems no, regarding some posts).

I hope someone could help me, as I tried to do the upgrade many times without success (using the tar archive to restore helpfully, from debian) and I am stuck to the 3.0.0.8 community version.

Thanks a lot!

I have very similar problem, including the odd message from ssu
on my device, store-repository is.not accessible by any method.
yesterday, the problem as seemed to "magically" fixed and I was able to complete the upgrade. however, after reboot the problem started again.....
also, I tried to do factory reset but it only reboots on gemini pda
« Last Edit: January 17, 2019, 12:05:49 pm by yoram »

rasva

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
    • http://
SailfishOS 3.0.1.11 released by Jolla
« Reply #11 on: January 17, 2019, 02:24:44 pm »
yoram: I have the rpms, will edit this post a bit later....

Edit: OK, as OESF does not allow more than 20MB per file, here is full archive of adaptation0
« Last Edit: January 17, 2019, 02:56:20 pm by rasva »
Cosmo
Gemini 4G/SailfishX

In past: Zaurus SL-C3200, Jornada 728, 690, Mobilepro 900C, Sharp PC3100, HP 200LX....

yoram

  • Newbie
  • *
  • Posts: 20
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« Reply #12 on: January 17, 2019, 06:03:52 pm »
Quote from: rasva
yoram: I have the rpms, will edit this post a bit later....

Edit: OK, as OESF does not allow more than 20MB per file, here is full archive of adaptation0

many many thanks

FrankS

  • Newbie
  • *
  • Posts: 27
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« Reply #13 on: January 29, 2019, 10:44:47 am »
Maybe this question on tjc has something to do with your problems since 15th of January.

The answer of Jolla admin tells something about 'configuration change'. Hopefuly its not because of my hack. ;-) Remember: it's a hack to go from the community version to the Jolla beta (maybe early release) and maybe not everybody likes it.

yoram

  • Newbie
  • *
  • Posts: 20
    • View Profile
SailfishOS 3.0.1.11 released by Jolla
« Reply #14 on: January 29, 2019, 01:23:49 pm »
Quote from: FrankS
Maybe this question on tjc has something to do with your problems since 15th of January.

The answer of Jolla admin tells something about 'configuration change'. Hopefuly its not because of my hack. ;-) Remember: it's a hack to go from the community version to the Jolla beta (maybe early release) and maybe not everybody likes it.

thanks, that was my question....
interestingly, at the time, the problem seemed to be solved and I was able to upgrade, after that the problem returned and is still exist...
unfortunatly, factory reset does not reset anything on my geminipda