1
Debian / Customized New Rootfs
« on: July 08, 2008, 08:52:01 pm »
Thank you for the great work you have done! Could you please patch the orinoco wireless driver for injection?
Select language:
News:
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Debian / Icehamster (was: Customising Minimo)
« on: May 05, 2008, 09:56:48 pm »
this looks awsome.. does it exist as an Angstrom package?
3
Debian / A Clean, Fresh, Configured Eabi Rootfs Tarball
« on: March 21, 2008, 11:19:44 am »
Is there anyway to make this a hdImage.tgz so I can actually use this image? I can't seem to unzip the bz2 stuff for some reason to the microdrive of my 3200.
4
Debian / Sound & Zaurusd Under Titchy?
« on: December 05, 2007, 11:01:18 am »
Has anyone got sound or zaurusd working under titchy?
I know most people are probably using the EABI tar ball, but I would like to get eveything working under the normal Debian ARM pot.
Has there been any progrss?
I know most people are probably using the EABI tar ball, but I would like to get eveything working under the normal Debian ARM pot.
Has there been any progrss?
5
Zaurus - pdaXrom / Root On Microdrive
« on: July 10, 2007, 07:02:57 pm »
Is it possible to install the latest pdaXrom exclusively to the microdrive on 3x00?
7
Zaurus - pdaXrom / Debian And Uboot
« on: April 26, 2007, 07:53:17 pm »
Could someone post a link to a tared rootfs that is already set up for the zaurus with correct key mappings and xserver for example?
8
Zaurus - pdaXrom / Debian And Uboot
« on: April 26, 2007, 11:04:27 am »
I got debian running without using u-boot for anyone that is interested.
I used the Angstrom Kernel (2.6.20.6) to boot off the micro drive of my 3200.
I used Angstrom's install script to uncompress the rootfs and install the kernel.
I used the Angstrom Kernel (2.6.20.6) to boot off the micro drive of my 3200.
I used Angstrom's install script to uncompress the rootfs and install the kernel.
9
Zaurus - pdaXrom / Aircrack-ng + Script
« on: January 20, 2007, 09:01:55 pm »
I'm trying to get the shell script at http://daouid.googlepages.com/airoscriptwepcrackingscript/ to work on pdaxrom rc121.
I installed the aircrack-ng ipk located at http://www.drolez.com/software/zaurus/#witools (as recommended by ldrolez in another post).
I couldn't execute some of the tools, such as aireplay-ng. Has anyone else used this script?
Also x-term doesn't display right on pdaxrom, it has little boxes after every character, does anyone know how to fix this?
Thank you very much!
I installed the aircrack-ng ipk located at http://www.drolez.com/software/zaurus/#witools (as recommended by ldrolez in another post).
I couldn't execute some of the tools, such as aireplay-ng. Has anyone else used this script?
Also x-term doesn't display right on pdaxrom, it has little boxes after every character, does anyone know how to fix this?
Thank you very much!
10
Zaurus - pdaXrom / Wifi Woes
« on: January 19, 2007, 02:27:23 pm »Quote
QuoteDoes anyone know if aircrack-ng is ported for rc121?Try my ipk, it should work on any distrib : [a href=\"http://www.drolez.com/software/zaurus/#witools]http://www.drolez.com/software/zaurus/#witools[/url] .
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]
Cheers,
[div align=\"right\"][a href=\"index.php?act=findpost&pid=151568\"][{POST_SNAPBACK}][/a][/div]
That ipk worked for aircrack-ng, but does it have all the other tools? like airodump etc..
11
Zaurus - pdaXrom / Wifi Woes
« on: January 11, 2007, 07:19:33 pm »
The card did need the firmware uploaded. I did it with the two files I found elsewhere on the forum. I used this script:
I'm not sure if that is the best way to do it, or if all the commands are needed, but it works, and doesn't give me errors. Now I just need to set it up to do this every time it reboots or suspends. unless there is an easier way.
Does anyone know if aircrack-ng is ported for rc121?
Code: [Select]
#!/bin/sh
echo 'flashing card'
prism2_srec -gs wlan0 pm010102.hex
prism2_srec -gp wlan0 pm010102.hex
iwpriv wlan0 reset 1
prism2_srec -rp wlan0 rf010804.hex
iwconfig wlan0 mode 2I'm not sure if that is the best way to do it, or if all the commands are needed, but it works, and doesn't give me errors. Now I just need to set it up to do this every time it reboots or suspends. unless there is an easier way.
Does anyone know if aircrack-ng is ported for rc121?
12
Zaurus - pdaXrom / Wifi Woes
« on: January 10, 2007, 08:02:46 am »Quote
On insert does it light up at all? what is the dmesg output on insert?
Let us know
Late
[div align=\"right\"][a href=\"index.php?act=findpost&pid=150644\"][{POST_SNAPBACK}][/a][/div]
No lights come on at all.
This is the output of dmesg upon input:
Code: [Select]
pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
ieee80211_crypt: registered algorithm 'NULL'
hostap_cs: 0.4.4-kernel (Jouni Malinen )
hostap_cs: setting Vcc=33 (constant)
hostap_cs: setting Vcc=33 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0047, io.base=0x0000, len=128
prism2: wifi0: operating mode changed 3 -> 2
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 3.3, irq 137, io 0xc4840000-0xc484007f
wifi0: hfa384x_setup_bap - timeout after
wifi0: hfa384x_set_rid (rid=fc0e, len=34) - failed - res=-110
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi0: hfa384x_cmd_issue - timeout - reg=0xd3be
wifi0: hfa384x_cmd: entry still in list? (entry=c0f6dee0, type=0, res=-1)
wifi0: hfa384x_cmd: interrupted; err=-110
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc28, len=2)
Could not read current WEP flags.
wifi0: encryption setup failed
wifi0: set_encryption failed
wifi0: hfa384x_setup_bap - timeout before
wifi0: hfa384x_set_rid (rid=fc02, len=34) - failed - res=-110
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi0: hfa384x_cmd_issue - timeout - reg=0xd3be
wifi0: hfa384x_cmd: entry still in list? (entry=c0f6df60, type=0, res=-1)
wifi0: hfa384x_cmd: interrupted; err=-110
wifi0: MAC port 0 enabling failed
wifi0: could not enable MAC port
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi0: hfa384x_cmd_issue - timeout - reg=0xd3be
wifi0: hfa384x_cmd: entry still in list? (entry=c0f6df60, type=0, res=-1)
wifi0: hfa384x_cmd: interrupted; err=-110
hostap_cs: Shutdown failed
hostap_cs: assuming no Primary image in flash - card initialization not completed
wifi0: test Genesis mode with HCR 0x1f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test failed, HCR 0x1f write 00 e1 a1 ff read 00 ce a1 ce
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test succeeded, HCR 0x0f
prism2_pccard_genesis_sreset: original COR 41
wifi0: registered netdevice wlan0
wlan0: cannot set RID fc0e (len=34) - no PRI f/w
wifi0: cannot get RID fc28 (len=2) - no PRI f/w
Could not read current WEP flags.
wifi0: encryption setup failed
wlan0: set_encryption failed
wlan0: cannot set RID fc02 (len=34) - no PRI f/w
wlan0: could not set interface UP - no PRI f/w
wlan0: could not set interface UP - no PRI f/w
13
Zaurus - pdaXrom / Wifi Woes
« on: January 10, 2007, 02:05:40 am »
I have the Planex cf wifi card. It came with my 3200 that I ordered from japan. I can't seem to get it to work with rc121 release. It works fine in openzaurus with the 2.6 kernel, but I can't figure it out in pdaxrom. Does anyone else have this card? How did you get it working?
Is there any better cf wifi cards I can buy that doesn't need the firmware loaded onto the flash? One that would just be plug and play with this release?
I've been searching the internet for hours, and can't find an answer, thanks for any help.
Is there any better cf wifi cards I can buy that doesn't need the firmware loaded onto the flash? One that would just be plug and play with this release?
I've been searching the internet for hours, and can't find an answer, thanks for any help.
Pages: [1]