Messages

1

Debian / Htc Universal

« on: October 14, 2008, 02:43:50 am »

apt-get update?

done. are you able to install titchy packages? the repository is up?

2

Debian / Htc Universal

« on: October 12, 2008, 02:16:41 pm »

Is there now work to fix the WiFi driver unstabilities?
I'm thinking about to compile the latest acx driver, but leave the htcuniversal-acx module without any modifications. Perhaps, it will be better, perhaps not.
Stay tuned, i will come with the result.

DOMy

EDIT:
Of course i was not able to find the kernel headers for our kernel (2.6.21-hh20).
so, the stable wifi connection will be only a dream for the next years

you should find kernel's sources here: http://wiki.neilandtheresa.co.uk/Titchy_Linux/Source

i'm not able to install titchy packages, seems like they're not in the repository.
i add 'deb http://debian.neilandtheresa.co.uk/ titchy/' in /etc/apt/sources.list but when i do 'apt-cache search titchy' i can't find nothing.
any advice?

3

Debian / Htc Universal

« on: October 12, 2008, 02:11:02 am »

i've been away from home for some days, and now i'm tryng again to install debian retrieving the rootfs with jigdo-lite, without success.
could somebody share a bare lenny rootfs to start playing? i would like to already have the titchy-linux stuff installed on it.
thanks

4

Debian / Htc Universal

« on: October 02, 2008, 01:43:52 pm »

@ShiroiKuma

The image you gives wor, but i want to connect to internet somehow, to aptitude full-upgrade and install the titchy tools. But no interface usb0 or wifi is possible you need the tichy-netwowk-settings and hardware??? Is this not included in the image?

Also touchscreen in X only works when he goes to sleep and wake up??

you could try this  http://sumoudou.org/index.php?cmd=%E7%9B%B...SB%20connection ,
but instead of the aptitude part write

allow hotplug usb0
iface usb0 inet static
   address 192.168.0.2
   netmask 255.255.255.0
   network 192.168.0.0
   broadcast 192.168.0.255
   gateway 192.168.0.1

in the /etc/network/interfaces on the universal.
boot titchy while the universal is already connected to the pc or it could be possible that the pc will not load the correct modules, see my posts in the previous page.
please, can you test if you get the cdc_subset, cdc_ether and zaurus modules loaded if titchy has been booted while uni was disconnected from pc?

i did not understand what's the matter with x, could you explain your problem in a better way?

5

Debian / Htc Universal

« on: October 02, 2008, 06:55:33 am »

@datathief
sorry, i must have checked bin and not usr/bin for dpkg, as kroonen said the only missing thing is sbin/runlevel

6

Debian / Htc Universal

« on: October 02, 2008, 01:01:39 am »

Well I downloaded it, booted from haret run in and now it does the following

Booting Debian GNU/Linux...
Unpacking base packages. This will take a while, but only needs to be done once.
Booting Debian GNU/Linux...
Unpacking base packages. This will take a while, but only needs to be done once.

This message repeats every 5 seconds. I waited an hour and still this appears.. Is this normal???

again, same problem as me, we could share an account on this forum  
i've tried with two sdcards too.

@Datachief
usr/bin/dpkg and sbin/runlevel are missing in both of the generated images (and on sdcard too).
yesterday's image md5sum: fd6ea69a2cccc89f7771fa4c2580ec76
today's image md5su: ae62e00379490d555471e41c28695391

thanks

7

Debian / Htc Universal

« on: October 01, 2008, 07:19:19 am »

It looks like the nightly process that rebuilds the image was running out of disk space.  I've moved it to a bigger disk, and a new image is being built now.

now it works, thanks  

8

Debian / Htc Universal

« on: October 01, 2008, 03:48:00 am »

same as me, i don't know nothing about jigdo-lite and i can't explain myself why things are going this way.
here : http://sumoudou.org/index.php?cmd=%E7%9B%B...the%20Universal
you can find an old debian lenny based rootfs (i think originally provided by Datachief) and a fattest debian sid based rootfs with a working x-server provided by ShiroIkuma.
I think i must read a lot to understand what exactly to do to have a system as i want (i would prefer debian lenny with fluxbox and a phone-management app running under x) and if i can somehow contribute, not being a developer.
Thanks to both Datachief and ShiroIkuma.

9

Debian / Htc Universal

« on: September 29, 2008, 11:53:32 am »

[  177.676009] usb 1-6: new full speed USB device using ohci_hcd and address 6
[  177.900038] usb 1-6: configuration #1 chosen from 2 choices
[  177.925687] usb 1-6: New USB device found, idVendor=0525, idProduct=a4a2
[  177.925692] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  177.925695] usb 1-6: Product: RNDIS/Ethernet Gadget
[  177.925697] usb 1-6: Manufacturer: Linux 2.6.21-hh20/pxa27x_udc
[  178.026135] usb0: register 'cdc_subset' at usb-0000:00:0b.0-6, Linux Device, 4a:2b:9a:c7:a1:f2
[  178.027821] usbcore: registered new interface driver cdc_subset
[  178.034001] usbcore: registered new interface driver cdc_ether
[  178.038576] usbcore: registered new interface driver zaurus

It seems like that i can have the usb network device of the uni recognized only if titchy has been booted while uni was connected via usb to a pc.
Tested on two different pc, also booting titchy while connected to one pc and then connected to the other one.
Seems an issue related to titchy and not to my systems, could you make some tests about it and see if this happens to you too?

10

Debian / Htc Universal

« on: September 28, 2008, 05:00:42 pm »

Follow these steps: http://sumoudou.org/index.php?cmd=%E7%9B%B...SB%20connection

and report all the errors you get.

i can't "aptitude update" and "aptitude install titchy network settings" because i can't get the internet.

ifconfig usb0 192.168.0.1
SIOCSIFADDR: No such device
usb0: ERROR while getting interface flags: No such device

this is the output of ifconfig usb0 192.168.0.1, i think it is related with the dmesg output that i post previously.
by the way, i have the same messages with two different kernels in debian and arch linux in my pc, and in arch linux in another pc.

i can ifup usb0 on the universal manually adding usb0 in /etc/network/interfaces.

i can't make a ppp connection with the string i've found in previous post, so i have a debian with no net, no luck!

i'm thinking to put myself in a better position (like installing packages from titchy repository) using qemu as you advice at this link:

http://sumoudou.org/index.php?cmd=%E7%9B%B...r%20on%20a%20PC

let me know if i'm doing something really dumb. thanks for your answers.

11

Debian / Htc Universal

« on: September 28, 2008, 04:00:44 am »

mmmm, when i try to get usb network i can ifup usb0 in titchy but i can't in my debian etch.
lsusb can't give me an output about the uni and dmesg says:

[  116.732011] usb 1-4: new full speed USB device using ohci_hcd and address 6
[  116.912007] usb 1-4: device descriptor read/64, error -62
[  117.196007] usb 1-4: device descriptor read/64, error -62
[  117.476009] usb 1-4: new full speed USB device using ohci_hcd and address 7
[  117.656008] usb 1-4: device descriptor read/64, error -62
[  117.940007] usb 1-4: device descriptor read/64, error -62
[  118.220009] usb 1-4: new full speed USB device using ohci_hcd and address 8
[  118.628006] usb 1-4: device not accepting address 8, error -62
[  118.804009] usb 1-4: new full speed USB device using ohci_hcd and address 9
[  119.212007] usb 1-4: device not accepting address 9, error -62
[  119.212022] hub 1-0:1.0: unable to enumerate USB device on port 4

seems that it's related to my pc, but i can't understand where to look for.
any help?

12

Debian / Htc Universal

« on: September 27, 2008, 11:51:58 am »

ok, i got it, debian boots and i'm happy    
when i will be able to find the slash in my qwerty keyboard i will be more happy  
again, thanks a lot for giving me a copy of your sistem

13

Debian / Htc Universal

« on: September 27, 2008, 07:32:27 am »

You can get the full rootfs, with mplayer for Universal, and X installed at: http://sumoudou.org/index.php?cmd=%E7%9B%B...the%20Universal

thanks a lot, i'm downloading the image  

14

Debian / Htc Universal

« on: September 27, 2008, 05:05:18 am »

I'm not able to download the rootfs following http://wiki.neilandtheresa.co.uk/Titchy_Li...stalling_Debian instructions
I run jigdo-lite from my debian etch and all seems to go ok, but when i untar it it complains about an error and exit.
the last file correctly extracted is ./basedebs/debian/pool/main/s/sed/sed_4.1.5-6_armel.deb
the dimension of titchy-rootfs.tar is 17,9 Mb and not 45 Mb as it should be.
i've searched the topic but i couldn't find something about this problem.
i've tried from a windows emulated system too and i ended with a titchy-rootfs.tar of the same size, 18324 kb, so it shouldn't be something wrong with my system.
any advice or a link from where download the rootfs image?
sorry about being a newbye like that and about my broken english.