Messages

1

For Sale / Wanted / C700 128mb Motherboard For Sale

« on: March 21, 2007, 09:46:36 pm »

Hi!

I have broken C700 with upgraded memory on mother board. The cables to  screen was broken (some one turned display in other direction and broke this mechanism) and it has OK button dropped.

VGA screen: 80$ -- SOLD!!

Upgraded to 128mb  C700 mother board: 80$

I can send it worldwide. Delivery cost will be added.

With best regards,
Mikhail

2

For Sale / Wanted / Zaurus C1000 For Sale (sold)

« on: March 20, 2007, 04:38:20 pm »

Hi!

I sell Zaurus C1000 which is 1.5 year old in good condition.

It comes with original accessories (usb host cabel, usb cabel, power adapter, box, japan manual)
and with 1 gb sd card, Sandisk Connect Plus Wifi Card, PDAir Delux Case.

Price 260$ + shipment

It can be shipped  world wide.

With best regards,
Mikhail

3

Zaurus - pdaXrom / Suspend / Screen Blanking After Inactivity Time

« on: March 05, 2007, 01:42:30 pm »

"Home" some time fails. Now, I get the same situation. One time I pressed "home", Zaurus had just blinking cursor, other time green led just glittered once. I am trying to resume my zaurus by "home" one half hour.. One time it wants to resume, other time it thinks to resume, next time it just wants to sleep more. I am so disappointed.. I used Zaurus with Cacko like a tool, now it is just fretful toy ((

4

Zaurus - pdaXrom / Suspend / Screen Blanking After Inactivity Time

« on: March 04, 2007, 07:19:05 pm »

Hmm... Home/Power doesn't work completely...
I have C1000 with pdaXrom r121. I am not so familiar with pdaXrom (I used cacko).. Can some body explain, whats happens that Zaurus cannot resume after suspend? It is so sadly, that it cannot turn on just by one press to power button..  Some times I need to restart... And it is more worse, because I need just to take a look in notes, or mail... Nothing more..

5

Security and Networking / Help With Sparklan 802.11g Cf Card

« on: November 03, 2006, 08:56:53 pm »

Did you get wpa worked?

6

C1000/3x00 Hardware / C1000: Touch Screen Doesn't Work

« on: October 04, 2006, 07:34:12 pm »

Hi!
I get such problem. Touchscreen just stoped to work. Some times when I fold up Zaurus, it turns off, and after that I need to restart to get it worked. I took off back cover of the screen and found that there is no connection between bus from touchscreen and slot (just measured resistance beetwen legs of slot). I tried to push it by fingers, and it seems that touch screen begin to work some times, but after that I changed this slot (get one from old died Aero), now it completly doesn't work. I have also checked bus from screen to main body - everything fine. What can I do now? How I can diagonse the problem? Who can repair it?
On photo cimg11600 you can see free space at right. There was same connector as second on the left.
On photo cimg11608 slot from Aero.

Now my zaurus works as electronic photo frame. My wife like it. But I want to get it back

7

Sharp ROMs / Help! Sandisk Wi-fi + 128mb Card Not Working

« on: November 16, 2005, 10:00:26 am »

I have to inform that my wifi card also works. I reinstalled the rom and then it works fine.

I don't know why it doesn't work the first time, but perhaps I should have done more test before posting. I'm sorry.

My donation is on the way.  Thanks
[div align=\"right\"][a href=\"index.php?act=findpost&pid=101888\"][{POST_SNAPBACK}][/a][/div]

Which rom do you have?
I am also trying to get it working on Cacko. I know, that OZ 3.5.3 is running on kernel 2.6.  It seems, that 2.6 has better pcmcia managment... I'll get it working on 2.6 first, and after that may be, it will be clear how to get it working on 2.4.

8

Hardware Mods / Stuffing Serial Bluetooth Module Inside C1k Casing

« on: November 02, 2005, 05:03:58 pm »

Is there any progress on the project?

9

Hardware Mods / Stuffing Serial Bluetooth Module Inside C1k Casing

« on: September 07, 2005, 04:25:30 pm »

Can your friend's friend help with getting a hold of schemantics or at least connector pin-out of DELL Trumobile 350 module? Assuming it's not a top-secret information? The module is manufactured by USI, but design and certification is done by CSR itself.
-albertr
[div align=\"right\"][a href=\"index.php?act=findpost&pid=94681\"][{POST_SNAPBACK}][/a][/div]

I've fired  off the request. Maybe I'll strike lucky and get offered some engineering samples :-)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=94686\"][{POST_SNAPBACK}][/a][/div]

Is there any sucsess with bluetooth?

10

Hardware Mods / Stuffing Serial Bluetooth Module Inside C1k Casing

« on: September 05, 2005, 04:40:45 pm »

The whole schematic should be a somthing like this:
http://2x4ever-vpn.compot.ru/zaurus/pics/p...l_schematic.PNG
[div align=\"right\"][a href=\"index.php?act=findpost&pid=94604\"][{POST_SNAPBACK}][/a][/div]

I think, the schematic is ok, but I don't know much about it. Why are you using such small resistance parallel to bluetooth? How long must delay be between impulses on JK flip-flop? I think, it will be great to filter dirty impulses which are generated when power plugin are slightly setted in the chassis. Perhaps, it is better to work with mail LED? Because we don't have any external events (such as power connection) which can be applied on the mail LED.

11

Hardware Mods / Stuffing Serial Bluetooth Module Inside C1k Casing

« on: September 05, 2005, 02:14:57 pm »

Umm, I wasn't thinking about using the same serial port for both bluetooth and serial connections. How that could be done?

It cannot be used for both bt and serial connections at the same time of course. But when BT is switched off a use of this serial port for other things shouldn't be a problem. However it may require some diodes to be soldered.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=94574\"][{POST_SNAPBACK}][/a][/div]

why not steal the IRDA serial lines? are they actually any use at all?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=94586\"][{POST_SNAPBACK}][/a][/div]

Yes. I'm using irda time to time. Not all of my friends have bluetooth enabled hardware.
But actualy we can share irda serial line with bluetooth.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=94591\"][{POST_SNAPBACK}][/a][/div]

Ok.. If you turned external power on, the power LED is turned on and you will take bluetooth power on and all irda hardware down...
Is it ok?

12

Hardware Mods / Stuffing Serial Bluetooth Module Inside C1k Casing

« on: September 05, 2005, 09:43:27 am »

For example:
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3818/ln/


But, I hope that Zaurus LED control has a bit more abilities than it uses.

13

Hardware Mods / Stuffing Serial Bluetooth Module Inside C1k Casing

« on: September 05, 2005, 09:39:31 am »

I've contacted with an official Dell distributor in Russia and they will tell me about availability of this module tomorrow.

While you are waiting answer from Dell can you tell me it is possible to use LED wires for control bluetooth power? I think, it is one of abilities. For example, we can use mail LED as Bluetooth LED and bluetooth power control.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=94552\"][{POST_SNAPBACK}][/a][/div]

Yes we can. But what if you want to leave this LED for mail notification?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=94555\"][{POST_SNAPBACK}][/a][/div]

I just want to foget it  
By the way, we can try to combine LEDs and power control.
How is LED control constructed? Perhaps, we can use somthing like one-wire control? I'm trying to find one-wire switcher or trigger to combine some functions.

14

Hardware Mods / Stuffing Serial Bluetooth Module Inside C1k Casing

« on: September 05, 2005, 08:55:50 am »

I've contacted with an official Dell distributor in Russia and they will tell me about availability of this module tomorrow.

While you are waiting answer from Dell can you tell me it is possible to use LED wires for control bluetooth power? I think, it is one of abilities. For example, we can use mail LED as Bluetooth LED and bluetooth power control.

15

Software / Cacko Rom Problems.

« on: September 04, 2005, 05:38:00 pm »

After I flash a cacko rom into my SL-5500, how to mount my SD card? In my understanding, I reckon it did some modification to my SD's file system. I created 2 partition in my SD. Partition 1 is 64MB and partition 2 is 448MB. Also my system is hell slow, sometime even freeze. Can anyone give me some tips? Thx in advance!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=94475\"][{POST_SNAPBACK}][/a][/div]

You can try to mount /dev/mmcda1 and /dev/mmcda2 devices..
For example:
1. Create mount points if you havn't these before:
 mkdir /mnt/card1
 mkdir /mnt/card2
2. Mount...
mount /dev/mmcda1 /mnt/card1
mount /dev/mmcda2 /mnt/card2