Messages

1

6000 - Tosa / Making Angstrom Work On Tosa

« on: January 14, 2008, 12:31:08 pm »

I installed Angstrom on my tosa and it seemed to work fine. However, none of the ipks I downloaded unstable/armv5te/base/ works for me. I used package manager and it just popped up an error message saying:

An error occured.
Please consult the message log for hints what went wrong.

I have no clue what went wrong and where to check message log.
In the system info -> log display -> System Log, I got:

Can't find circular buffer, is syslog running?
Can't find circular buffer, is syslog running?

2

Angstrom & OpenZaurus / Wireless 3.5.4.2 Tosa Gpe

« on: January 17, 2007, 12:19:35 pm »

works fine in opie.  Looks like something I did wrong on my setup. Still putting opie together on the 6k.... But I assume gpe will work just fine too.

Thanks.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147299\"][{POST_SNAPBACK}][/a][/div]

I am trying to enable my wifi for OZ/GPE but with no luck.

Is there information that I can use to enable wifi on my tosa? I checked wiki and it doesn't work. Maybe it's the way I specified the WEP password. In the wiki, it says:
wlan_ng_key0 aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa

Now, my home network is setup to use 64bit Hex, how do I setup wlan_ng_key0?

Also in the wiki, it says to change wireless_mode from managed to ad_hoc, does that means I need to change my router's setting as well? Thanks.

Martin

3

6000 - Tosa / Bluetooth Headphone On Sharp Rom?

« on: November 23, 2006, 01:30:58 am »

I have my bluetooth cf working and "sdptool browse" can find my IOGear bluetooth headphone. When I use

Code: [Select]

spdtool search -bdaddr 00:11....It reported the headset information. However, my bluetooth headphone's led kept blinking which meant it was not connected.

I can't find anyone use headphone successfully on SL6000. But I'd like to ask to see if anyone got it work or I should give up for good.

4

6000 - Tosa / Can't Make Socket Bluetooth Rev H Working

« on: March 25, 2006, 08:28:41 pm »

well, seems that this logitech wireless headphone does not use real bt technology. I can't even make a Mac G4 laptop discover it.  
Case closed.

5

6000 - Tosa / Can't Make Socket Bluetooth Rev H Working

« on: March 25, 2006, 12:52:41 am »

Ok, got the headphone today but still can't make it work. I think my bluetooth started ok, when I use hciconfig I got:
hci0: Type: UART
        BD Address: 00:02:C7:42:BE:C0 ACL MTU:340:4 SCO MTU: 64:10
        UP RUNNING PSCAN ISCAN
        RX bytes:298 acl:0 sco:0 events: 15 errors:0
        TX bytes:472 acl:0 sco:0 commands: 13 errors:0

But when I ust sdptool browse, I got nothing except Inquiring ...
Maybe the headphone is not supported? Or do I miss anything? I don't have other bt device so I don't know...

6

6000 - Tosa / VoIP On the 6000

« on: March 20, 2006, 12:45:58 am »

Hi guys, brilliant thread!
I read through all the post and am able to setup KPhone on my Z.
Now, I have packet8 service and how can I send/receive calls from my Z to packet8? Say if I make it happen, I have to leave my Z open all the time to receive calls, don't I?

7

6000 - Tosa / Can't Make Socket Bluetooth Rev H Working

« on: March 17, 2006, 12:29:26 pm »

Thank you. There is only source code and I don't have cross-compile set up. I tried many times to set up cross-compile on either my Fedora or Gentoo but no luck. Do you know any ipk available?

8

6000 - Tosa / Can't Make Socket Bluetooth Rev H Working

« on: March 16, 2006, 09:20:01 pm »

Thank you so much. After I unstalled all the BlueZ ipks and install that one, I got no error message and hciconfig give me some information. now I am excited to know whether that headphone works or not.

9

6000 - Tosa / Can't Make Socket Bluetooth Rev H Working

« on: March 15, 2006, 11:46:57 pm »

I am thinking of buying a logitech bluetooth headphone (this one), since it has 50 rebate right now, so that I can enjoy wireless music.
After I read a bunch of tutorial and forum discussion, I still can't make it work. Basically, the error message I got when I tried to start bluetooth is:
Starting Bluetooth subsystem: hcid sdpdCan't open RFCOMM control socket: No such file or directory
 rfcomm.

I installed:
bluez-kernel-2.4.18-mh14_arm.ipk
bluez-libs-2.21_arm.ipk
bluez-utils-2.21a_arm.ipk
(download from HERE)
and
bluez-csr-serial_0.1_arm.ipk
(according to Bluetooth HOW-TO)

any help will be greatly apprecriated.

10

Zaurus - pdaXrom / Wifi And Some Minor Questions

« on: March 09, 2006, 11:07:42 am »

One thing confuses me is where I can put static ip address of my SL6K? I checked /etc/wlan/wlan.conf but can't find any where to add that. Again, I added the ip address under Lan & Wifi but no go.

Regrading the suspending problem, sometimes it works sometimes it does not.

Looks like I am going back to Sharp rom  

11

Zaurus - pdaXrom / Wifi And Some Minor Questions

« on: March 08, 2006, 04:14:53 pm »

I don't know where the problem might be. I thought those messages are related to my problem that wifi does not work.

I am pretty sure that I tried Fn+c in terminal. But it turned to be just a regular c.

I just found out that when I use power off button to suspend SL6k, I can't bring it back.

Martin

12

Zaurus - pdaXrom / Wifi And Some Minor Questions

« on: March 08, 2006, 02:40:31 pm »

I just managed to install pdaXrom this morning. But I couldn't get my wifi to work. I follow the instruction that I found here:
instruction I found
but when I wifiup, I got the following message:
:
:
prism2dl: warning: Failed to find PDR for plugrec 0x0406.
prism2dl: warning: Failed to find PDR for plugrec 0x0302.
prism2dl: warning: Failed to find PDR for plugrec 0x0303.
prism2dl: warning: Failed to find PDR for plugrec 0x0412.
prism2dl: warning: Failed to find PDR for plugrec 0x0414.
prism2dl: finished.

I do see the wireless led turned on. I don't know if it is because I am in static IP wireless network. I changed the settings under System Tools -> Lan & Wifi but it did not work. Can anyone help me with this?

Also, how do I type Ctrl-C in command line?

Thanks
Martin

13

Qt/Qtopia / Qtopia Example Compile Error

« on: June 21, 2005, 11:28:09 am »

I installed all required packages in the "Compile Setup" in Zaurus How-To Docs. The only difference is I installed version 8-3.3.4.2 for those compat libs under my Fedora Core 3 machine. Building the example for x86 is fine and it also executed ok. But when I switched to dev-arm-qpe.sh and tried to compile a zaurus version of that example, I got the following error message:

Code: [Select]

:
arm-linux-gcc  -o example main.o example.o examplebase.o moc_example.o moc_examplebase.o  -L/opt/Qtopia/sharp/lib -L/opt/Qtopia/sharp/lib -lqpe -lqtopia -lqte
/opt/Embedix/tools/arm-linux/bin/ld: warning: libuuid.so.1, needed by /opt/Qtopia/sharp/lib/libqtopia.so, not found (try using -rpath or -rpath-link)
/opt/Embedix/tools/arm-linux/bin/ld: warning: libjpeg.so.62, needed by /opt/Qtopia/sharp/lib/libqte.so, not found (try using -rpath or -rpath-link)
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_read_scanlines'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_set_defaults'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_start_decompress'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_destroy_decompress'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_std_error'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_CreateDecompress'
/opt/Qtopia/sharp/lib/libqtopia.so: undefined reference to `uuid_generate'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_read_header'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_start_compress'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_destroy_compress'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_finish_decompress'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_resync_to_restart'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_CreateCompress'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_finish_compress'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_set_quality'
/opt/Qtopia/sharp/lib/libqte.so: undefined reference to `jpeg_write_scanlines'
collect2: ld returned 1 exit status
make: *** [example] Error 1
However, I do have libuuid.so.1 in /lib and also in /opt/Qtopia/sharp/lib and libjpeg.so.62 in  /usr/lib and /opt/Qtopia/sharp/lib. Did I miss something? Thanks in advance.

14

Software / Kdepim-pi On Fedora Core 3

« on: June 20, 2005, 02:41:23 pm »

Hi All,

Just wanted to mention my experience with Fedora Core 3 and running kdepim-pi.  I managed to get it working with too much problems by downloading the 2.1.0 memory stick version from pi-sync.net.  Afterwards, trying to run kopi_Linux by itself comes up with a linking error as it looks for libqt.so.3.  On my system I had /usr/lib/qt-3.3/lib/libqt-mt.so.3.3.4, so I added a symbolic link from /usr/lib/libqt.so.3 to /usr/lib/qt-3.3/lib/libqt-mt.so.3.3.4.  After that, kopi_Linux runs! Syncs like a champ over 802.11b to my 5600. 

I didn't get into kdepim-pi until just recently and have now found it to be just a fantastic piece of software.  And the fact that I can sync on Linux is great.  Big thanks to Zautrix for all the hard work, and hope this info may help others get things going.

steven
[div align=\"right\"][a href=\"index.php?act=findpost&pid=77975\"][{POST_SNAPBACK}][/a][/div]

Which file did you use exactly? I have been trying to make a working version on my Windows 2000, Fedora Core 3, and gentoo. None of them works for me. I can't find any support forum either. It would be great to sync with my 6K.

15

Windows Issues / Ka/pi In Windows 2000

« on: June 15, 2005, 11:52:35 am »

I downloaded various version from sourceforge and am using kdepim_2.1.5_windows_xp for my windows 2000 machine. First of all, during configure kaddressbook->data storage path, after I click "Save using LOCAL storage", I can not change it back to standard. I had to go into .microkdehome to change it back.

No matter what option I used in configure kaddressbook, when I tried to configure resource, I got "unable to create resource of type 'dir'". Nor can I create other type of resources.

The reason I want to configure resource is because I got "There is no resource available" when I tried to create a new contact.