Messages

1

Security and Networking / Cacko Wpa Config Problem

« on: April 28, 2005, 04:50:51 pm »

I configured wpa_supplicant.config and i get this message during running.

Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'default'Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=10 (from group name 'wheel')
ctrl_interface_group=0
eapol_version=1
ap_scan=1
Priority group 10
   id=5 ssid='example'
Priority group 5
   id=0 ssid='example'
   id=1 ssid='simple'
   id=14 ssid='static-wep-test'
Priority group 2
   id=2 ssid='second ssid'
   id=3 ssid='example'
   id=6 ssid='example'
   id=8 ssid='example'
Priority group 1
   id=4 ssid='example'
Priority group 0
   id=7 ssid='example'
   id=9 ssid='example'
   id=10 ssid=''
   id=11 ssid='WSZIB_AK8'
   id=12 ssid='leap-example'
   id=13 ssid='plaintext-test'
   id=15 ssid='example'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Failed to open interface 'wlan0'.
eth_open: No such device
wpa_driver_hostap_set_wpa: enabled=0
ioctl[PRISM2_IOCTL_HOSTAPD]: No such device
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: No such device
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: No such device

Failed to open interface 'wlan0'.
eth_open: No such device
wpa_driver_hostap_set_wpa: enabled=0
ioctl[PRISM2_IOCTL_HOSTAPD]: No such device
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: No such device
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: No such device
Failed to disable WPA in the driver.
wpa_driver_hostap_set_drop_unencrypted: enabled=0
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: No such device
wpa_driver_hostap_set_countermeasures: enabled=0
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: No such device
rmdir[ctrl_interface]: No such file or directory        

Please help. I have AMBICOM wifi card. zaurus sl-c860 CACKO 1.22 ROM

2

Security and Networking / 802.1x

« on: April 25, 2005, 01:25:23 pm »

Hi all.
Does anyone here have any information regarding an 802.1X client for the Zaurus?
I'm getting frustrated .
Funk's Odyssey - NO
Open1X - NO (or some instruction please)
Aegis - NO
http://www.katastrophos.net/zaurus/package..._0.15-1_arm.ipk - NO (ipk doesn't work, i don't know what to do, someone tried?-some instructions please?)

Please give me some help with it .