Messages

1

Angstrom & OpenZaurus / Cf Gps Billionton Problem Oz 3.5.3

« on: December 08, 2005, 07:58:23 pm »

Couldn't get it working with 3.5.3 so I used 3.5.2 and it works now.

TotochTV

2

Software / Qpegps Problem

« on: December 08, 2005, 07:57:07 pm »

Thank you so much! It works now. It has been a week (including two nights without sleeping) since I started to try to get this thing working. I tried everything: Cacko ROM (4 versions 1.22/1.23 Lite and full) and  OZ 3.5.3. I now have the right software. You saved my third night

Thank you very much!

TotochTV

3

Software / Qpegps Problem

« on: December 08, 2005, 02:47:51 pm »

Hello all,

I have installed OpenZaurus 3.5.2 and Opie on my SL-C750. I want to be able to use my  Bilionton CF GPS with qpegps.  I have installed the setserial-2.17-r0, gpsd-2.6-r1 and qpegps-0.9.2.2-r0 packages. I have changed the option in qpegps to /dev/ttyS3.

I can run

Code: [Select]

gpsd -p /dev/ttyS3 -s 4800
telnet localhost 2947
rand see the NMEA  output.

When I run qpegps, the status light for gpsd is green but the GPS light is red and it displays  "No GMT signal rcvd".

Can anybody help me?

Thank you very much!

TotochTV

4

Angstrom & OpenZaurus / Cf Gps Billionton Problem Oz 3.5.3

« on: December 04, 2005, 11:32:54 pm »

Hello all,

I installed OpenZaurus 3.5.3 with Opie on my Sl-C750. I have tried everything to get my billionton CF GPS working but I am stuck...

The cardctl ident returns this:

Code: [Select]

Socket 0:
 prod info: "CFGPS", LPV1.0", "", ""
 manfid: 0x0104, 0x0060
 function: 2 (serial)
So I added the following to my /etc/pcmcia/config.opts:

Code: [Select]

card "billionton CF GPS"
 version "CFGPS", LPV1.0", "", ""
 manfid 0x0104, 0x0060
 bind "serial_cs"
Since the serial_cs module isn't available from a fresh install I downloaded it from the official/unstable/3.5.3/upgrades/c7x0 feed and installed it. I later discovered that this particular module also requires the 8250 module so I also installed it.

When I insert the card, there are no icons that appears on the card manager. Whenever I try cardctl suspend, cardctl eject, the programs hangs and I can't quit it. The card is never assigned the /dev/ttyS3 as this is /var/run/stab when the card is inserted:

Socket 0: empty

It is strange because the led of the card is blinking and lsmod returns:

Module       Size         Used by     Not tainted
serial_cs   7336    1  -                  Live 0xbf00600
8250          19816 3  serial_cs    Live 0xbf000000

I also installed setserial as I found that the procedure to see if all works and output data is:

Code: [Select]

setserial -g /dev/ttyS3
stty 4800 < /dev/ttyS3
cat /dev/ttyS3but setserial just hangs and I can't quit it either.

I installed pcmcia-cs-ftl_3.2.8-r17_c7x0.ipk,  pcmcia-cs-pcinitrd_3.2.8-r17_c7x0.ipk and  pcmcia-cs_3.2.8-r17_c7x0.ipk and edited again my config.opts again but it still don't work.


This is the dmesg:

Backtrace:
[<c016d4f4>] (uart_configure_port+0x0/0x1bc) from [<c016da2c>] (uart_add_one_port+0xac/0x13c)
 r7 = C0289BB4  r6 = BF0046A4  r5 = BF004A84  r4 = C2BB2000
[<c016d980>] (uart_add_one_port+0x0/0x13c) from [<bf0029a4>] (serial8250_register_port+0x204/0x228 [8250])
 r8 = BF00478C  r7 = BF004A84  r6 = 00000000  r5 = 00000000
 r4 = 00000000
[<bf0027a0>] (serial8250_register_port+0x0/0x228 [8250]) from [<bf0062bc>] (setup_serial+0x68/0x108 [serial_cs])
[<bf006254>] (setup_serial+0x0/0x108 [serial_cs]) from [<bf006c60>] (serial_event+0x854/0xab0 [serial_cs])
 r7 = C3F56000  r6 = C3F56000  r5 = C314B600  r4 = 00000000
[<bf00640c>] (serial_event+0x0/0xab0 [serial_cs]) from [<c01af608>] (pcmcia_register_client+0x344/0x394)
[<c01af2c4>] (pcmcia_register_client+0x0/0x394) from [<bf00620c>] (serial_attach+0xc0/0x108 [serial_cs])
[<bf00614c>] (serial_attach+0x0/0x108 [serial_cs]) from [<c01b0740>] (ds_ioctl+0x914/0xbc0)
 r7 = C275DF04  r6 = C275DEC0  r5 = C050643C  r4 = C3C73E08
[<c01afe2c>] (ds_ioctl+0x0/0xbc0) from [<c00dddf8>] (do_ioctl+0x6c/0xa0)
[<c00ddd8c>] (do_ioctl+0x0/0xa0) from [<c00ddec0>] (vfs_ioctl+0x94/0x328)
 r7 = 00000000  r6 = 0001C0A0  r5 = 00000003  r4 = C3850A80
[<c00dde2c>] (vfs_ioctl+0x0/0x328) from [<c00de194>] (sys_ioctl+0x40/0x64)
 r8 = C006AAA4  r7 = 00000036  r6 = C050643C  r5 = FFFFFFF7
 r4 = C3850A80
[<c00de154>] (sys_ioctl+0x0/0x64) from [<c006a920>] (ret_fast_syscall+0x0/0x2c)
 r6 = 000391E0  r5 = 00000001  r4 = 00000001
Code: 1a000013 e596304c e3530000 0a000003 (e1d321fe)

Do I have to install another module? If anybody can help it would be greatly appreciated as I have no more ideas to get this thing working.

Thank you!

TotochTV