Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - stars

Pages: [1]
5x00 General discussions / Sl5600 Sever?
« on: August 28, 2005, 12:13:59 pm »
I am thinking if we can make our little 5600 into a tiny server?
I have trouble finding smtp relay and named for Z. Any advice?
Which ROM is good for this?

I would like to host my tiny server ...  

Angstrom & OpenZaurus / Feed For Poodle (sl5600)
« on: May 17, 2005, 08:32:37 pm »
hi ... it seems that the feed is missing some of the modules (eg iptables) for poodle. I see these are available for collie. Can I use them for the poodle or are there alternative sources when I can get them.
Unless the kernel for poodle is compiled without support for iptables??  

Need to use shorewall.


Angstrom & OpenZaurus / Install To Which? Sd? Ram Or Root
« on: May 15, 2005, 11:37:25 pm »
I am just wondering for ipkg, where should I install packahges?
Wats the diff between RAM and Root?

I have a SL5600 (poodle)


Angstrom & OpenZaurus / Minimo Installation For Gpe 3.5.3
« on: May 14, 2005, 11:37:51 pm »
Not sure if this is the correct place to ask this. But I am having problems installing minimo.
I get the following errors

libstdc++6: unsatisfied recommendation for kernel-module-usbdserial
libstdc++6: unsatisfied recommendation for kernel-module-usbkbd
libstdc++6: unsatisfied recommendation for kernel-module-usbmouse
libstdc++6: unsatisfied recommendation for kernel-module-usbutils
libstdc++6: unsatisfied recommendation for kernel-module-evdev
Nothing to be done
An error occured, return value: 1.
Collected errors:
ERROR: Cannot satisfy the following dependencies for minimo:
libx11-6 (>= 6.2.1cvs20050403)

Appreciate advice. Thanks!

Angstrom & OpenZaurus / Oz Gpe 3.5.3 On Sl5600(pxa250) - Poodle
« on: May 11, 2005, 08:49:19 pm »
Hi ...  I am convinced to take test the GPE 3.5.3  

Its a lot faster and the on/off suspend works. I can live with some of the bugs so far ...
eg ...
Control panel does not start ... and Package manager crash (seems to reports out of memory!)

By the way, where do I get the 2.6.x  Kernel for Poodle(250)?   Might as well try that all.
I saw the kernel upgrades in the feed but it seems its only for the C7xx models.

Going to try out OE ... if time allows


Sharp ROMs / Which Ipkg To Use?
« on: May 11, 2005, 01:17:20 am »
I have the standard ipkg with my Sharp ROM (Watapon) and also install ipkg-new.
Downloaded some IPKs but it just does not seem to work!

Any suggestions?


Sharp ROMs / Cross Compiling Htun
« on: May 10, 2005, 11:35:32 pm »
I am having trouble cross compling htun 0.9.5

Its a IP over HTTP tunneling application  

Have anyone else tried?

Sharp ROMs / Request For Sharp Kernel Source
« on: May 06, 2005, 02:23:13 am »
Hi all,

Could someone share with me the most updated Sharp Kernel/ROM Source?
It used to be available in the community site ... but now it seems to have disappeared althogether

Trying to compile with Netfilter and IPSEC support.


5x00 General discussions / Iptable. Ipsec
« on: May 05, 2005, 11:52:09 pm »

Just wondering which is the best kernel / ROM for the SL5600.
I need iptable and IPSEC for VPN.

The Sharp kernel source codes seems to have disappeared??  I remembered that I used to be able to get it from the Zaurus community site, but its seems to be no longer available  

Can anyone give me some advice?
Appreciate if someone can show me a link to the latest Kernel sources (1.32?).


Angstrom & OpenZaurus / Gpe Slow? Iptables?
« on: January 05, 2005, 01:26:00 am »
It seem GPE 3.5.2 is much slower then opie?
Also, is iptables support and IPSEC support enabled?

I have decided to make my 5600 into a security tool rather than a PDA. It will be a remote sniffer/auditor  

So GPE seems nice if it does not make the processing of applications eg tcpdump ... slower than when using OPIE.


Sharp ROMs / Best Rom For Sl5600
« on: December 25, 2004, 03:37:58 am »
Hi all, I have lost touch with Zaurus for a while and there seems to be so many version of ROMs now  

But choice is good ... but I am soft of a lost  

Which is the "best" ROM now? I would like to use it as a PIM and sync data/addr with yahoo.

I have played with oz ... but I guess thats too adveturous for me now  

Which is a good sync tool in Linux/Windows?
I switch to Linux using my custom knoppix  


Zaurus - pdaXrom / pdaX ROM for 5600??
« on: May 24, 2004, 09:16:10 pm »
Hi ... havent been updating my news recently.  
Its been quite a while since I last played with my Z.
Is this new pdaX rom compatible with the 5600??  It sounds interesting!
Does it have the kernel patch like that of the \"special kernel\" for the 5600, which also allows overclocking?  


For Sale / Wanted / SL5600 for Sale in Singapore ...
« on: February 25, 2004, 03:35:51 am »
Check out the classifieds in
All prices in SGD.  ... need money ...

Computers Sharp Zaurus SL5600 ++ Tampines, sg     Email to a friend  
Description:  Zaurus SL5600 + Free Original leather case ($450) Optional Items: -CF 100Mbps Ethernet Card -CF WIFI Card Great Linux/Security/Hacking Tool!! Let me know via email if you are interested!  Visit this web site:  
Date Posted: 02/23/04  
Price: $ 450.00  

Contact:  SP  
Email:  Reply to this ad  
Location:  Singapore
Tampines, SG  529482  
Other Ads: Listings from star_lit_me  
Ad ID: merchandise-1077346287-4858281

Pages: [1]