Messages

1

Sharp ROMs / Problem With Cacko 1.23 On The C3200

« on: August 02, 2008, 01:12:34 pm »

i tested 1 and 2 gb card(witch sd updater for cacko)

2

Sharp ROMs / Problem With Cacko 1.23 On The C3200

« on: July 26, 2008, 06:13:27 am »

I found this in the another topic

https://www.oesf.org/forum/index.php?act=at...ost&id=2244

I dont have /mnt/card /dev/mmcda1 ( everything is OK )

I logged as root and

mkdir /dev/mmcda1 and mount /dev/mmcda1 I saw : device or resource busy
so? :>

3

Sharp ROMs / Problem With Cacko 1.23 On The C3200

« on: July 25, 2008, 08:40:53 pm »

Hello i have two problems with my zaurus.
First problem:I cleared my hdd(format,flash erase etc)Early i dont have this problem. after the instalation cacko didnt see sd card  but original rom has not this problem.
What should I do ?

Second problem:

I have this alert : HDD not initialized. I downloaded pack from trisoft , I add partitions with instruction and nothing. still this same

my fstab from cacko:

Linux version 2.4.20 (maslovsky@linux) (gcc version 2.95.3 20010315 (release))
#4 Thu, 04 May 2006 23:11:42 +0400
CPU: XScale-PXA270 revision 7
Machine: SHARP Terrier
Converting old-style param struct to taglist
Ignoring unrecognised tag 0x00000000
Turbo Mode clock : 416.00MHz (*2.0, active)
Run Mode clock   : 208.00MHz
System bus clock : 208.00MHz (1/1)
Memory clock     : 208.00MHz (1/1)
LCD clock        : 104.00MHz (1/2)
Security risk: creating user accessible mapping for 0x08000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:71
68k@0k(smf),44032k@7168k(root),-(home) jffs2_orphaned_inodes=delete EQUIPMENT=5
 LOGOLANG=1 DEFYEAR=2007 LOGO=1 LAUNCH=q
Console: colour dummy device 80x30
Calibrating delay loop... 415.33 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62160KB available (1980K code, 497K data, 136K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 8
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 2000210
enable_irq(120) unbalanced from c000c7d8
batok installed
Starting kswapd
Journalled Block Device driver loaded
JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communication
s AB.
Squashfs 2.2 (released 2005/07/03) © 2002-2004, 2005 Phillip Lougher
Sharp SL-Series PXA fb driver initialized.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: SHARPSL_PXAFB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 22) is a 16550A
ttyS01 at 0xf8700000x (irq = 20) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 21) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
spitz remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xxRAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Spitz audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00140000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MB 3,3V) Creating 3 MTD partitions on "NAND 128MB 3,3V":
0x00000000-0x00700000 : "smf"
0x00700000-0x03200000 : "root"
0x03200000-0x08000000 : "home"
Linux Kernel Card Services 3.1.31
  options:  [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.31)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
Backlight Driver Initialized.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 381
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 136K
Trying to free nonexistent resource <f7000000-f700000f>
hda: HMS360606D5CF00, ATA DISK drive
ide0 at 0xf7000000-0xf7000007,0xf700000e on irq 136
hda: 12000556 sectors (6144 MB) w/128KiB Cache, CHS=11905/16/63
Partition check:
 hda: hda1 hda2 hda3
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
 hda: hda1 hda2 hda3
 hda: hda1 hda2 hda3
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset utf8
bvdd:  Registeration is a success.
bvdd:  AREA       VIRTUAL   PHYSICAL     SIZE
bvdd:  BVDD  : 0xc597b000 0xa3600000  2097152
bvdd:  PXAFB : 0xc3e00000 0xa3e00000   614400
bvdd:  SRAM  : 0xfe100000 0x5c001000   262144
 hda: hda1 hda2 hda3
 hda: hda1 hda2 hda3
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset utf8

sry for my english:P

4

Poland / Problem Z Zaurusem

« on: July 20, 2008, 10:56:18 am »

Witam. Ostatnio sformatowalem sobie zaurusa co przynioslo mi wiele problemow z dyskiem. mialem duzy problem z bledem hdd1 error ale poradzilem sobie. teraz wyswietla mi sie blad HDD not initialized trzeba cos zrobic z plikami ktore sa w owej paczce http://www.trisoft.de/download/SLC3200SYSPART.zip

partycje sa ustawione tak jak w tabeli. nie rozumiem tylko ostatniej czesci txt wiec jak ktos moglby mi pomoc

oto pliczek:

Contents of the system-partitions for the SL-C3200
TRIsoft / Marc Stephan / April 11th, 2006

Use the information in this document at your own risk.
TRIsoft is not liable for any damages that may result from
these informations.


SL-C3200 HDD-Partition table:
/dev/hda1  Start 1  End 20  Blocks 10048+  id 83 System Linux
/dev/hda2  Start 21 End 40  Blocks 10080  id 83 System Linux
/dev/hda3  Start 41 End 11905 Blocks 5979960 id c System Win95 FAT32 (LBA)

Note:
While using the fdisk on the Zaurus, double check that you set the
correct parameters for the drive. They have to be:
16 heads / 63 sectors/track / 11905 cylinders

Format the partitions with:
mke2fs -j /dev/hda1
mke2fs -j /dev/hda2
mkfs.vfat -F 32 /dev/hda3


/hda1 and /hda2 are 9.5 MB partitions. Each one contains a ".sys" and
a "lost+found" directory. The contents of the .sys-directories are
in this file.

Files in /hdd1/.sys :
hdimage2.tgz  (2149 Bytes, contains japanese web-bookmarks - hurray !)
hdlist1.dat (85 Bytes, no clue what it's good for)

Files in /hdd2/.sys :
contlist.dat (74327 Bytes)
hdlist2.dat (1264 Bytes)
hdlist3.dat (1519 Bytes)


The Zaurus will display an error like "HDD not initialized" if the
directories and files are missing. Just restoring the partition table
won't make an SL-C3200 happy.

5

C1000/3x00 General discussions / Problem With Zaurus 3200

« on: July 20, 2008, 05:27:15 am »

I downloaded backup rom,cacko and hdd*sys
 I installed nand -- without problems
but When I reboot with trick (d +B ) zaurus logged as root and in this moment I dont know what I have to do
what I have to do with http://www.trisoft.de/download/SLC3200SYSPART.zip?
I have still hdd1 error so I go to fdisk and...?
What should I do with SLC3200SYSPART while booting?

ok done  but i have a little problem yet...

trisoft write:

/hda1 and /hda2 are 9.5 MB partitions. Each one contains a ".sys" and
a "lost+found" directory. The contents of the .sys-directories are
in this file.

Files in /hdd1/.sys :
hdimage2.tgz  (2149 Bytes, contains japanese web-bookmarks - hurray !)
hdlist1.dat (85 Bytes, no clue what it's good for)

Files in /hdd2/.sys :
contlist.dat (74327 Bytes)
hdlist2.dat (1264 Bytes)
hdlist3.dat (1519 Bytes)


The Zaurus will display an error like "HDD not initialized" if the
directories and files are missing. Just restoring the partition table
won't make an SL-C3200 happy.

I dont have hdd1 error but i i have Hdd not initialized now:) so What can I mount this files from trisoft?

6

C1000/3x00 General discussions / Problem With Zaurus 3200

« on: July 15, 2008, 06:10:45 pm »

heh... i try and try but i cant install partition  I install backup soft for 3200. after I install cacko and far I cant install partition. maybe I do something wrong? today I go to trip and I would like repair my zaurus but this is difficult for me because my english is not perfect. please write me this easier
can I use the sd card?

7

C1000/3x00 General discussions / Problem With Zaurus 3200

« on: July 15, 2008, 04:23:47 pm »

Hi all . I'am new here and my english is not perfect:) sry for mistake.

I formated disk in my Z yestarday. When i turned on pda i saw this problem while booting:

HDD1 error

I looked for answer about this problem, I found but I understand this
I found this topic

http://www.planetofidiots.com/zaurus/
http://www.eleves.ens.fr/home/leurent/zaurus.html
https://www.oesf.org/forum/index.php?showtopic=24704

I know that i can press ctrl + c and i can go to system but my Z dont see a disk  

Can I use sd card?

Solution 2 - Download the file http://www.trisoft.de/download/SLC3200SYSPART.zip. This file contains instructions and the files needed in order to manually partition the 6GB hard drive and restore it to it's original condition.

pls write me step by step How can I install partition because everything doesnt work correctly