Author Topic: take a 5500 apart ??  (Read 5159 times)

dansawyer

  • Sr. Member
  • ****
  • Posts: 293
    • View Profile
    • http://
take a 5500 apart ??
« on: August 28, 2004, 02:59:40 pm »
All,

I have a broken 5500 Z. I would like to take it apar. I have taken out the 4 scews in the battery compartment, the 2 on the top and 1 on the side. At this point it starts to seperate.  I believe I am missing 1 or more screws. Can someone point out where they are??

Thanks.
Dan

soycap

  • Jr. Member
  • **
  • Posts: 73
    • View Profile
    • http://www.tekprosystems.com/zaurus
take a 5500 apart ??
« Reply #1 on: August 29, 2004, 01:14:03 am »
I think what you are missing is that you need to remove the keyboard cover first.  This walks you through the whole process:

http://www.tekprosystems.com/zaurus/internals.htm

I would suggest that you pick up some "thin" gutar picks to help to snap apart the case (step 12), just don't force anything.  The picks helped me a lot.

I have had mine apart a few times, what are you trying to do?

soycap

dansawyer

  • Sr. Member
  • ****
  • Posts: 293
    • View Profile
    • http://
take a 5500 apart ??
« Reply #2 on: August 30, 2004, 12:49:41 pm »
thank you

My light burnt out. I am trying to see if it is replacable. I may buy a bricked Z and swap lights.

Dan

soycap

  • Jr. Member
  • **
  • Posts: 73
    • View Profile
    • http://www.tekprosystems.com/zaurus
take a 5500 apart ??
« Reply #3 on: September 01, 2004, 09:46:29 pm »
Good luck and let us know how you make out.  

If you do get a bricked Z, you may want to get one with a working LCD.  Take a closer look when you open the unit.  Relpacing the screen with the light already attached might be much easier than just replacing the light.

soycap

dansawyer

  • Sr. Member
  • ****
  • Posts: 293
    • View Profile
    • http://
take a 5500 apart ??
« Reply #4 on: September 08, 2004, 12:34:33 pm »
Well,

I was able to take is apart and put it back together. There were a few hangups:

1. there is one screw under the keypad

2. there were several small plactic parts that fell out.

3. upon reassmebly operations seemed 'soft' for a while.

All in all it is not a difficult procedure.

This Z seems to have an intermittent. The light now works about 80% of the time. I am convinced it is a S/W race condition on boot/restore.

Dan

kgw

  • Newbie
  • *
  • Posts: 13
    • View Profile
take a 5500 apart ??
« Reply #5 on: November 12, 2005, 08:24:47 pm »
Quote
I have a broken 5500 Z. I would like to take it apar. I have taken out the 4 scews in the battery compartment, the 2 on the top and 1 on the side. At this point it starts to seperate.  I believe I am missing 1 or more screws. Can someone point out where they are??
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

There is a good source of info about this at:

[a href=\"http://repair4pda.org/disassembly_sharp.html]Zaurus Dissasembly[/url]

Ken