I\'ve been fighting with my 5600 from the moment I bought it to get any wireless card working in a non-OZ image (note, I did have some luck with OZ 3.3.6, but it was too unstable to use). I\'ve tried Zynergy, but ended up going back to the Sharp 1.32 image just so I could have as much stability as possible.
I\'ve tried three different cards, three different brands, all with no luck. In particular, a Zonet ZCF1100 and a Ambicom WL1100C-CF. They seem to be Prism_2 cards? In all cases, It just won\'t go. I keep getting an error about hfa384x_corereset not working properly. Can anyone make sense of this??
It seems that it loads the drivers, and then suspends them?? I get similar looking messages regardless of which wireless card I use.
# cardctl ident
Socket 0:
product info: \"AmbiCom\", \"WL1100C 802.11b CF-Card\", \"2.2\"
manfid: 0xd601, 0x0002
function: 6 (network)
Socket 1:
no product info available
System info:
# uname -a
Linux zaurus 2.4.18-rmk7-pxa3-embedix #1 Fri, 2 Jan 2004 01:00:14 +0000 armv5tel unknown
Dmesg info:
init_module: prism2_cs.o: 0.1.12-shp Loaded
init_module: dev_info is: prism2_cs
prism2_cs: index 0x01: Vcc 3.3, irq 39, io 0xf6000000-0xf600003f
hfa384x_corereset: hfa384x_corereset not supported on pcmcia. Use driver services COR access function instead
ident: nic h/w: id=0x800c 1.0.0
ident: pri f/w: id=0x15 1.0.7
ident: sta f/w: id=0x1f 1.3.6
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: SN0000000001
pxa_pcmcia_suspend(0)
