Ah! Help... Nand Restore Now What...

[Z3n]

Alright, decided it was time to try out the OZ 3.4.5.1 distro but because I had Cacko 1.23 installed previously I needed to do a NAND restore to get the original partitions back.

Right...

So, I grab the NAND restore file and I get to the NAND flash utility, flash the Z and here is what I got...

NAND Restore from CF
file: SYSTC100.DBK
Execute restore? -> pressed OK
Delete all flash data? -> pressed OK
Restore...OK

Alright, so it looks like it restored (Green bar all the way across bottom of screen).  But pushing OK doesn't do anything.  Pressing On/Off doesn't do anything.  Is it waiting to finish something or do I need to remove the battery and reboot it that way?

Don't want to fry the little guy...

Thanks.

Z3n

[Z3n]

Ok, I went ahead and removed the battery to get it rebooted... Sharp screen came up and it appeared to be booting...

Rebooted again and flashed to OZ... and I am now looking at Opie 1.2

[InSearchOf]

all you had to do was press cancel aka "esc" lil button to directional pad

Late