← previous next →
Pages: [1]

Author Topic: Crash - Pdaxii13  (Read 3608 times)

climber

  • Full Member
  • ***
  • Posts: 189
    • View Profile
Crash - Pdaxii13
« on: June 19, 2007, 11:02:26 am »
Hi,

I only want to do a fsck on /dev/hda1 so i used the pdaXi13 v5.4.6 config-tool to activate the "Maintenance Mode".

After reboot I got the following message:

Warning:  unable to open  an initial console
Kernel panic: Attempted to Koll init!    

I used the update menue to get a shell to type in:  fsck /dev/hda1
At the end there were errors and again "Kernel panic!"

Ok ...ggggrrrr!!!!

Restoring a Nand-Backup failed. So I decided to start from the beginning:

1.) Install pdaXrom beta3
2.) copy Meanies pdaXii13 v5.4.6 data to cf
3.) Install the kernel and bootloader TWICE, once before and one after installing the hdimage
4.) After this reboot I got the same error message as above!!!!


I hope that anyone can help me!!!    

Thanks
climber
Logged

climber

  • Full Member
  • ***
  • Posts: 189
    • View Profile
Crash - Pdaxii13
« Reply #1 on: June 19, 2007, 11:03:34 am »
The error message was:  

Warning: unable to open an initial console
Kernel panic: Attempted to Kill init!



Thanks
climber
Logged

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Crash - Pdaxii13
« Reply #2 on: June 19, 2007, 09:09:14 pm »
Quote
Hi,

I only want to do a fsck on /dev/hda1 so i used the pdaXi13 v5.4.6 config-tool to activate the "Maintenance Mode".

After reboot I got the following message:

Warning:  unable to open  an initial console
Kernel panic: Attempted to Koll init!   

I used the update menue to get a shell to type in:  fsck /dev/hda1
At the end there were errors and again "Kernel panic!"

Ok ...ggggrrrr!!!!

Restoring a Nand-Backup failed. So I decided to start from the beginning:

1.) Install pdaXrom beta3
2.) copy Meanies pdaXii13 v5.4.6 data to cf
3.) Install the kernel and bootloader TWICE, once before and one after installing the hdimage
4.) After this reboot I got the same error message as above!!!!


I hope that anyone can help me!!!     

Thanks
climber
[div align=\"right\"][a href=\"index.php?act=findpost&pid=163396\"][{POST_SNAPBACK}][/a][/div]

what Z model do you have? are you using the correct installer for your model?
there is no need to install beta3. pdaXii13 has its own installer...
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

climber

  • Full Member
  • ***
  • Posts: 189
    • View Profile
Crash - Pdaxii13
« Reply #3 on: June 20, 2007, 02:30:31 am »
Meanie,

I have a SL-C3100 Zaurus. I used the  installation instructions from Danboid  on http://www.tyrannozaurus.com/?q=wiki/Zauru...gebase/Pdaxii13.

According to his instructions I installed first pdaxrom beta3 and after that your pdaXii13.

I put the following data on CF-card:
- for C3000:  hdimage-full.tgz (200MB) - build5.4.6 / updater.sh (v0.25) /updater-tools.bin build 15

- from Akita:  tools.tar / initrd.bin  /update.bin

If this is wrong please tell me how to do it right for my SL-C3100.

What I also tried:
- delete and create new /dev/hda1 & /dev/hda2 with fdisk.
- No success after trying to install pdaXii13 v5.4.6


Please help!!!


Thanks
climber
Logged

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Crash - Pdaxii13
« Reply #4 on: June 20, 2007, 02:39:56 am »
Quote
Meanie,

I have a SL-C3100 Zaurus. I used the  installation instructions from Danboid  on http://www.tyrannozaurus.com/?q=wiki/Zauru...gebase/Pdaxii13.

According to his instructions I installed first pdaxrom beta3 and after that your pdaXii13.

I put the following data on CF-card:
- for C3000:  hdimage-full.tgz (200MB) - build5.4.6 / updater.sh (v0.25) /updater-tools.bin build 15

- from Akita:  tools.tar / initrd.bin  /update.bin

If this is wrong please tell me how to do it right for my SL-C3100.

What I also tried:
- delete and create new /dev/hda1 & /dev/hda2 with fdisk.
- No success after trying to install pdaXii13 v5.4.6


Please help!!!


Thanks
climber
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

why are you following danboid's instructions instead of mine?

[a href=\"http://www.tyrannozaurus.com/feed/pdaXii13/akita/]http://www.tyrannozaurus.com/feed/pdaXii13/akita/[/url]
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

climber

  • Full Member
  • ***
  • Posts: 189
    • View Profile
Crash - Pdaxii13
« Reply #5 on: June 20, 2007, 03:31:15 am »
I'm not sure why but now I want to do it like your instruction!!!

To go sure that I all understand right I will write down the major steps. Please could you check whether it's ok after my special crash!

1.) Go to your akita link and copy the following files to my CF card:
- updater.sh (v0.3)
- tools.tar (4.2MB)
- initrd.bin (52MB
- hdimage-base.tgz  (from /tmp folder)

2.) boot up to flash menue
3.) resize root to 121 #
4.) Install new rom
5.) reboot
6.) copy hdimage-full.tgz to cf-card
7.) boot up to flash menue
8.) copy hdimage to microdrive
9.) reboot
10.) finish

Thanks
climber
Logged

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Crash - Pdaxii13
« Reply #6 on: June 20, 2007, 04:37:12 am »
Quote
I'm not sure why but now I want to do it like your instruction!!!

To go sure that I all understand right I will write down the major steps. Please could you check whether it's ok after my special crash!

1.) Go to your akita link and copy the following files to my CF card:
- updater.sh (v0.3)
- tools.tar (4.2MB)
- initrd.bin (52MB
- hdimage-base.tgz  (from /tmp folder)

2.) boot up to flash menue
3.) resize root to 121 #
4.) Install new rom
5.) reboot
6.) copy hdimage-full.tgz to cf-card
7.) boot up to flash menue
8.) copy hdimage to microdrive
9.) reboot
10.) finish

Thanks
climber
[div align=\"right\"][a href=\"index.php?act=findpost&pid=163438\"][{POST_SNAPBACK}][/a][/div]

you forgot the kernel
also, use hdimage-base.tgz or hdimage-full.tgz, not both

step 5,6,7 are redundant
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

climber

  • Full Member
  • ***
  • Posts: 189
    • View Profile
Crash - Pdaxii13
« Reply #7 on: June 20, 2007, 04:51:12 am »
What do you mean with "forgot the kernel"? On which place will this come?

New order:

1.) Go to your akita link and copy the following files to my CF card:
- updater.sh (v0.3)
- tools.tar (4.2MB)
- initrd.bin (52MB
- hdimage-base.tgz  (from /tmp folder)

2.) boot up to flash menue
3.) resize root to 121 #
4.) Install new rom
5.) copy hdimage-full.tgz to cf-card
6.) reboot
7.) finish
Logged

climber

  • Full Member
  • ***
  • Posts: 189
    • View Profile
Crash - Pdaxii13
« Reply #8 on: June 20, 2007, 04:59:46 am »
I did a misstake so once again:

What do you mean with "forgot the kernel"? On which place will this come?

New order:

1.) Go to your akita link and copy the following files to my CF card:
- updater.sh (v0.3)
- tools.tar (4.2MB)
- initrd.bin (52MB
- hdimage-full.tgz (from /tmp folder)

2.) boot up to flash menue
3.) resize root to 121 #
4.) Install new rom
5.) copy hdimage-full.tgz to cf-card
6.) reboot
7.) finish
Logged
Pages: [1]
← previous next →