HI, I plan to flash my sl5600 using Zynergy RON. I am wondering the below procedure is a right step to flash the Zynergy ROM since I brick on of my previous SL5600. If someone did, Is the docking Station work with windows 2000 for synchronization while SL5600 is running Zynergy RON.
Please help me out.
1. Make sure the AC power jack is connected.
2. Download the ROM image: zImage, initrd.bin, updater.sh.
If the filenames are different, change them to the above or else the zaurus will not be able to find them. The filenames are case sensitive. Note the capital I in zImage.
3.Put the ROM files in the root directory of your CF
card /mnt/cf (maybe possible with SD).
4. Turn the zaurus over and flip the battery case switch to \"Replace Battery\".
Remove the battery cover but don\'t remove the battery
5. Push the reset button on the lower right of the battery compartment
with your stylus
6. Replace the battery cover and switch to \"Normal Operation\"
7. Flip the zaurus over and simultaneously press the \"Cancel\" and \"OK\" buttons
8. The Maintenance Screen will display. Choose \"Update\"
9. After the update, flip the zaurus over again and switch to \"Replace Battery\"
10. Open the battery compartment, dont remove the battery. Press the reset switch.
11. Close the battery compartment, switch to \"Normal Operation\"
12. Flip the zaurus over and press simultaneously the \"Cancel\" and \"OK\" buttons again.
13. The Maintenance screen comes up again. Select \"Format\"
14. The zaurus will reboot to your new Operating System.
Derek4100
