Hi,
on plugging my symbol spectrum42 wifi card in, i get a CF icon butt not the network. cardctl tells me it is suspended and resume has no effect. It was working fine last time I tried. This is on an 860 with standard sharp rom, and an updated socketspectrum driver installed.
Here is the output from dmesg. I have no idea what it all means! Can anyone help?
Thanks,
James
------------
serial options enabled
ttyS00 at 0xf8100000x (irq = 14) is a 16550A
ttyS01 at 0xf8700000x (irq = 12) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 13) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
corgi remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
PPP BSD Compression module registered
ide_cs.c 1.26 1999/11/16 02:10:49 (David Hinds)
Corgi audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00120000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0xec, Chip ID: 0x79 (Samsung K9D1G08V0M)
Creating 3 MTD partitions on "Samsung K9D1G08V0M":
0x00000000-0x00700000 : "smf"
0x00700000-0x03c00000 : "root"
0x03c00000-0x08000000 : "home"
Linux Kernel Card Services 3.1.22
options: [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.22)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
orinoco.c 0.12 (David Gibson <hermes@gibson.dropbear.id.au> and others)
hermes.c: 7 Jun 2002 David Gibson <hermes@gibson.dropbear.id.au>
orinoco_cs.c 0.12 (David Gibson <hermes@gibson.dropbear.id.au> and others)
spectrum_cs.c 0.3.4
Backlight Driver Initialized.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 © 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 480
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 108K
Inode #3097 was a directory with children - removing those too...
Inode #4027 was a directory with children - removing those too...
Inode #3668 was a directory with children - removing those too...
Inode #3298 was a directory with children - removing those too...
Inode #3555 was a directory with children - removing those too...
Inode #3778 was a directory with children - removing those too...
Inode #3782 was a directory with children - removing those too...
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
SD Driver Initialized.
sharp_mmcsd 0.21 27 Sep 2002
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
pxa_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
monitor_modinit: finished
eth0: Station identity 0021:0002:0002:0001
eth0: Looks like a Symbol firmware version [F3.10-06] (parsing to 31006)
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:A0:F8:A0:16:2C
eth0: Station name "Prism I"
eth0: ready
eth0: index 0x01: Vcc 3.3, irq 39, io 0xf6000000-0xf6000047
pxa_pcmcia_suspend(0)
pxa_pcmcia_suspend(0)
pxa_pcmcia_init(0)
ide_attach()
ide_config(0xc3c9d480)
Trying to free nonexistent resource <f6000000-f600000f>
hda: Hitachi XXM2.3.0, ATA DISK drive
ide0 at 0xf6000008-0xf600000f,0xf600000e on irq 39
hda: 250368 sectors (128 MB) w/1KiB Cache, CHS=978/8/32
Partition check:
hda: hda1
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
VFS: Disk change detected on device ide0(3,1)
hda: hda1
VFS: Disk change detected on device ide0(3,1)
hda: hda1
EXT2-fs: Unrecognized mount option quiet
VFS: Disk change detected on device ide0(3,1)
hda: hda1
VFS: Disk change detected on device ide0(3,1)
hda: hda1
cramfs: wrong magic
VFS: Disk change detected on device ide0(3,1)
hda: hda1
VFS: Disk change detected on device ide0(3,1)
hda: hda1
VFS: Can't find a Minix or Minix V2 filesystem on device 03:01.
VFS: Disk change detected on device ide0(3,1)
hda: hda1
VFS: Disk change detected on device ide0(3,1)
hda: hda1
MSDOS FS: IO charset utf8
ide_detach(0xc3c9d480)
ide_release(0xc3c9d480)
pxa_pcmcia_init(0)
eth0: Station identity 0021:0002:0002:0001
eth0: Looks like a Symbol firmware version [F3.10-06] (parsing to 31006)
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:A0:F8:A0:16:2C
eth0: Station name "Prism I"
eth0: ready
eth0: index 0x01: Vcc 3.3, irq 39, io 0xf6000000-0xf6000047
pxa_pcmcia_suspend(0)
pxa_pcmcia_suspend(0)
pxa_pcmcia_init(0)
eth0: Station identity 0021:0002:0002:0001
eth0: Looks like a Symbol firmware version [F3.10-06] (parsing to 31006)
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:A0:F8:A0:16:2C
eth0: Station name "Prism I"
eth0: ready
eth0: index 0x01: Vcc 3.3, irq 39, io 0xf6000000-0xf6000047
pxa_pcmcia_suspend(0)
pxa_pcmcia_init(0)
ide_attach()
ide_config(0xc3c9d780)
hda: Hitachi XXM2.3.0, ATA DISK drive
ide0 at 0xf6000008-0xf600000f,0xf600000e on irq 39
hda: 250368 sectors (128 MB) w/1KiB Cache, CHS=978/8/32
hda: hda1
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
VFS: Disk change detected on device ide0(3,1)
hda: hda1
VFS: Disk change detected on device ide0(3,1)
hda: hda1
EXT2-fs: Unrecognized mount option quiet
VFS: Disk change detected on device ide0(3,1)
hda: hda1
VFS: Disk change detected on device ide0(3,1)
hda: hda1
cramfs: wrong magic
VFS: Disk change detected on device ide0(3,1)
hda: hda1
VFS: Disk change detected on device ide0(3,1)
hda: hda1
VFS: Can't find a Minix or Minix V2 filesystem on device 03:01.
VFS: Disk change detected on device ide0(3,1)
hda: hda1
VFS: Disk change detected on device ide0(3,1)
hda: hda1
MSDOS FS: IO charset utf8
ide_detach(0xc3c9d780)
ide_release(0xc3c9d780)
pxa_pcmcia_init(0)
eth0: Station identity 0021:0002:0002:0001
eth0: Looks like a Symbol firmware version [F3.10-06] (parsing to 31006)
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:A0:F8:A0:16:2C
eth0: Station name "Prism I"
eth0: ready
eth0: index 0x01: Vcc 3.3, irq 39, io 0xf6000000-0xf6000047
pxa_pcmcia_suspend(0)
pxa_pcmcia_suspend(0)
pxa_pcmcia_suspend(0)
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
hermes @ IO 0xf6000000: Card removed while issuing command.
