Author Topic: Newbie with Sharp Cam on OZ3.2 SL-5500 probs (Read 2671 times)

al · « **on:** May 25, 2004, 04:05:49 am »

Hi. I\'m a newbie with a SL-5500/OZ3.2-40/24 config. I can\'t seem to get the Sharp camera to work with OpieCam. I\'ve installed the sharp drivers from vanille.de, but I\'ve heard that busybox needs to either be upgraded or downgraded.

Can somebody please point me to an ipk for busybox. I tried to install the one from killefiz.de, but when following the instructions to the letter, it wouldn\'t allow me to link.

Any help would be appreciated.

Thanks.

Al.

Mickeyl · « **Reply #1 on:** May 25, 2004, 04:09:51 am »

You can try to use the busybox binary from OZ 3.3.5.

al · « **Reply #2 on:** May 25, 2004, 04:29:18 am »

Thanks for the info. Would that be

/official/3.3.5/collie/ipks/busybox_1.00-pre2-5_armv4l-strongarm.ipk?

al · « **Reply #3 on:** May 25, 2004, 04:42:03 am »

When trying to install the above I get:
ERROR: busybox.postinst returned 2
postinst script returned status 2.

al · « **Reply #4 on:** May 25, 2004, 05:04:27 am »

Finally it works.

Had to install:
busybox 1.00-pre2-5
OpieCam 1.0
sharp-camera-support - 2.4.6-rmk1-np2-embedded

Still getting the error listed above tho.

lardman · « **Reply #5 on:** May 25, 2004, 07:32:57 am »

Take a look at the script in question which is probably in /usr/lib/ipkg/ (somewhere under here, though it you installed on a card you\'ll have to prepend the appropriate /mnt/*/ to the front of my path).

See why it doesn\'t work and delete it to remove the error ;-).

Not pretty but it should work.

Si

News:

Author Topic: Newbie with Sharp Cam on OZ3.2 SL-5500 probs (Read 2671 times)