← previous next →
Pages: [1]

Author Topic: Usb Networking  (Read 14956 times)

david_dahan

  • Newbie
  • *
  • Posts: 43
    • View Profile
    • http://
Usb Networking
« on: April 27, 2005, 10:24:55 pm »
Hi ,

I just installed RC9 in my C750 , I am trying to connect (USB) the Z to a SuSE 9.2 machine but failed .
I can ping the Z from my desktop , the opposite way failed .
Can some one please send me a step by step procedure to setup the machines for a network connectivity .

thanks,
David.
Logged
SL-C750 running pdaXrom 1.1.0 Beta1
512MB SD
Linux SuSE 10.0 Laptop + desktop

Martin

  • Full Member
  • ***
  • Posts: 138
    • View Profile
Usb Networking
« Reply #1 on: April 28, 2005, 01:20:54 pm »
Hi David,

before giving a hint it is neccesary to know which SuSE versing you are using ... because hotplug mechanism has changed (I think it was between 9.0 and 9.1/9.2) ...

you have to check some output at system console Ctrl-Alt-F10 while connecting Z to SuSE box ... look what output is at the end of /var/log/messages or post the dmest output ...

Good luck
Martin
Logged
--------------------------------------------------------
sl-c860 /w pdaXrom 1.1.0 Kathrin r121
CF 1GB , SD 2GB + 1GB + 512MB , MMC 512MB
Netgear MA701 WLAN 801b
Asus WL-HDD2.5 (very nice thing) /w 60 GB
--------------------------------------------------------
PC/Notebook SuSE 10.1 Prof. / KDE3.5.4
VDR /w KnoppMyth R5C7 (/w Myth 0.19)
--------------------------------------(August 2006)---

david_dahan

  • Newbie
  • *
  • Posts: 43
    • View Profile
    • http://
Usb Networking
« Reply #2 on: April 28, 2005, 05:37:15 pm »
Quote
Hi David,

before giving a hint it is neccesary to know which SuSE versing you are using ... because hotplug mechanism has changed (I think it was between 9.0 and 9.1/9.2) ...

you have to check some output at system console Ctrl-Alt-F10 while connecting Z to SuSE box ... look what output is at the end of /var/log/messages or post the dmest output ...

Good luck
Martin
[div align=\"right\"][a href=\"index.php?act=findpost&pid=77393\"][{POST_SNAPBACK}][/a][/div]


Hi Martin ,

Im using Suse 9.2 profetional , the following is the dmesg output :


Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
Attached scsi generic sg3 at scsi0, channel 0, id 0, lun 3,  type 0
USB Mass Storage device found at 4
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb0: register usbnet at usb-0000:00:1f.4-2.1.3, Sharp Zaurus, PXA-2xx based
usbcore: registered new driver usbnet
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 17
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=6917 SEQ=2048
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.168.254 DST=192.168.168.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.168.254 DST=192.168.168.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=1 DF PROTO=UDP SPT=137 DPT=137 LEN=76
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.168.254 DST=192.168.168.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=2 DF PROTO=UDP SPT=137 DPT=137 LEN=76
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.168.254 DST=192.168.168.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=3 DF PROTO=UDP SPT=137 DPT=137 LEN=76
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.168.254 DST=192.168.168.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=4 DF PROTO=UDP SPT=137 DPT=137 LEN=76
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC= SRC=192.168.129.200 DST=192.168.129.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC= SRC=192.168.129.200 DST=192.168.129.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=1 DF PROTO=UDP SPT=137 DPT=137 LEN=76
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC= SRC=192.168.129.200 DST=192.168.129.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=2 DF PROTO=UDP SPT=137 DPT=137 LEN=76
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC= SRC=192.168.129.200 DST=192.168.129.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=3 DF PROTO=UDP SPT=137 DPT=137 LEN=76
ACPI: PCI interrupt 0000:00:1f.5 -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 182850 usecs
intel8x0: clocking to 48000
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=6917 SEQ=3584
eth0: no IPv6 routers present
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=6917 SEQ=3840
Device not ready.  Make sure there is a disc in the drive.
Device not ready.  Make sure there is a disc in the drive.
Device not ready.  Make sure there is a disc in the drive.
Device not ready.  Make sure there is a disc in the drive.
usb0: no IPv6 routers present
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=6917 SEQ=4096
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=6917 SEQ=4352
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=6917 SEQ=4608
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1)
powernow: This module only works with AMD K7 CPUs
Non-volatile memory driver v1.2
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
Device not ready.  Make sure there is a disc in the drive.
Device not ready.  Make sure there is a disc in the drive.
Device not ready.  Make sure there is a disc in the drive.
Device not ready.  Make sure there is a disc in the drive.
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7429 SEQ=0
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7429 SEQ=256
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7429 SEQ=512
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7429 SEQ=768
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7685 SEQ=0
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7685 SEQ=256
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7685 SEQ=512
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC=fa:9b:da:91:3a:89:40:00:01:00:00:01:08:00 SRC=192.168.129.201 DST=192.168.129.200 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7685 SEQ=768
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.168.254 DST=192.168.168.255 LEN=264 TOS=0x00 PREC=0x00 TTL=64 ID=1 DF PROTO=UDP SPT=138DPT=138 LEN=244
SFW2-IN-ILL-TARGET IN=usb0 OUT= MAC= SRC=192.168.129.200 DST=192.168.129.255 LEN=264 TOS=0x00 PREC=0x00 TTL=64 ID=1 DF PROTO=UDP SPT=138 DPT=138 LEN=244


thanks  for responding.
David.
Logged
SL-C750 running pdaXrom 1.1.0 Beta1
512MB SD
Linux SuSE 10.0 Laptop + desktop

Martin

  • Full Member
  • ***
  • Posts: 138
    • View Profile
Usb Networking
« Reply #3 on: April 29, 2005, 03:43:31 pm »
Hi :-)

My first intention is that your firewall is the problem ... try to add usb0 to the internal interface of the firewall ...

but you will get an error starting up your computer, if the Z is not connected at startup ... because interface usb0 did not exist if Z is not connected properly ...

Second thought was ... did you change your setting of USB working as USBnet device not USBmasstorage ... look inside the Z menu under System Tools / USB and change it to Network

Martin
« Last Edit: April 30, 2005, 07:42:25 am by Martin »
Logged
--------------------------------------------------------
sl-c860 /w pdaXrom 1.1.0 Kathrin r121
CF 1GB , SD 2GB + 1GB + 512MB , MMC 512MB
Netgear MA701 WLAN 801b
Asus WL-HDD2.5 (very nice thing) /w 60 GB
--------------------------------------------------------
PC/Notebook SuSE 10.1 Prof. / KDE3.5.4
VDR /w KnoppMyth R5C7 (/w Myth 0.19)
--------------------------------------(August 2006)---

david_dahan

  • Newbie
  • *
  • Posts: 43
    • View Profile
    • http://
Usb Networking
« Reply #4 on: May 04, 2005, 04:20:01 pm »
Quote
Hi :-)

My first intention is that your firewall is the problem ... try to add usb0 to the internal interface of the firewall ...

but you will get an error starting up your computer, if the Z is not connected at startup ... because interface usb0 did not exist if Z is not connected properly ...

Second thought was ... did you change your setting of USB working as USBnet device not USBmasstorage ... look inside the Z menu under System Tools / USB and change it to Network

Martin
[div align=\"right\"][a href=\"index.php?act=findpost&pid=77565\"][{POST_SNAPBACK}][/a][/div]

Hi ,

I managed to establish a connection over the USB , I have ping working in both sides and able to synchronize Ka/Pi & Ko/Pi in the two machines.
Now I'm looking for a way to mount the storage devices of the Z on the Linux (SuSE9.2 pro) PC over NFS .
I thiks that I successfuly set up an NFS server on the PC but I will help in setting up NFS client on the Z .

thanks,
David.
Logged
SL-C750 running pdaXrom 1.1.0 Beta1
512MB SD
Linux SuSE 10.0 Laptop + desktop

david_dahan

  • Newbie
  • *
  • Posts: 43
    • View Profile
    • http://
Usb Networking
« Reply #5 on: May 06, 2005, 08:45:51 am »
Quote
Quote
Hi :-)

My first intention is that your firewall is the problem ... try to add usb0 to the internal interface of the firewall ...

but you will get an error starting up your computer, if the Z is not connected at startup ... because interface usb0 did not exist if Z is not connected properly ...

Second thought was ... did you change your setting of USB working as USBnet device not USBmasstorage ... look inside the Z menu under System Tools / USB and change it to Network

Martin
[div align=\"right\"][a href=\"index.php?act=findpost&pid=77565\"][{POST_SNAPBACK}][/a][/div]

Hi ,

I managed to establish a connection over the USB , I have ping working in both sides and able to synchronize Ka/Pi & Ko/Pi in the two machines.
Now I'm looking for a way to mount the storage devices of the Z on the Linux (SuSE9.2 pro) PC over NFS .
I thiks that I successfuly set up an NFS server on the PC but I will help in setting up NFS client on the Z .

thanks,
David.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=78274\"][{POST_SNAPBACK}][/a][/div]


any suggestion ...... ?

David.
Logged
SL-C750 running pdaXrom 1.1.0 Beta1
512MB SD
Linux SuSE 10.0 Laptop + desktop

Stubear

  • Hero Member
  • *****
  • Posts: 1164
    • View Profile
    • http://
Usb Networking
« Reply #6 on: May 06, 2005, 10:04:52 am »
Use samba, it's alread turned on by default on the Z when doing usb networking.

Or you can try the usb storage connection, but it only allows you to mount the SD or CF card - can't do both at once.

Stu
Logged
SL-C1000, Hand converted to English with Japanese Input
Running X apps via X/Qt
iRiver USB host cable; Diatec P-Cord usb power cable (extendable); Acro's Reel Cable USB (A to A, B, Mini-B,  & Mini-B 8pin); GreenHouse 1Gb PicoDrive+; 2x256Mb Hagiwara SD cards; 128Mb Transcend CF card; 512Mb PQI CF card; AmbiCom WL1100C-CF 11B WLAN card

david_dahan

  • Newbie
  • *
  • Posts: 43
    • View Profile
    • http://
Usb Networking
« Reply #7 on: May 06, 2005, 03:48:59 pm »
Quote
Use samba, it's alread turned on by default on the Z when doing usb networking.

Or you can try the usb storage connection, but it only allows you to mount the SD or CF card - can't do both at once.

Stu
[div align=\"right\"][a href=\"index.php?act=findpost&pid=78540\"][{POST_SNAPBACK}][/a][/div]

Hi Stu ,

Thanks for replying . I have samba running on my Suse based PC (all WinXP PC's are visible) , I'm not sure that samba is running on the PDAX machine , ps aux | grep smb do not show any smb daemon running and smbstatus is not recognize.
Is samba server/client a part of RC9.1 ?
I looked on pdax feed , samba is presented bu there are many samba-codepage-xxx packages that I do not know what they are ....

cheers,
David.
Logged
SL-C750 running pdaXrom 1.1.0 Beta1
512MB SD
Linux SuSE 10.0 Laptop + desktop

Martin

  • Full Member
  • ***
  • Posts: 138
    • View Profile
Usb Networking
« Reply #8 on: May 10, 2005, 11:24:14 am »
Hallo Leute,

irgendwie steh ich grad auf dem Schlauch ... hab vor einigen Tagen ein Update von SuSE 9.2 auf 9.3 (mit neuem Kernel 2.6.11.4-20a-default) gemacht

Mein Zaurus hat bis jetzt einwandfrei mit hotplugscript über usbnet modul funktioniert ... jetzt geht nix mehr ... komischerweise funktioniert, erkennt aber der massstorage treiber und scsi emulation der Zaurus c860 im usb massenspeicher modus ...

seit dem funktionieren meine USB Maus und meine usbnet Anbinfung zum Zaurus nicht mehr ... USB Maus wird zwar durch hotplug erkannt, aber kein device zugewiesen und X kann nichts mit dem Eingabegerät anfangen.

Hat jemand eine Idee?

Hat sich am hotplug mechanismus seit SuSE 9.2 und altem kernel etwas geändert ... welche Rolle spielt dabei der neue udev mechanismus? Wieso funktioniert usbview nicht? Auch in /proc/.../usb/devices ist nicht drin ... *grummel*

Gruss
Marftin
« Last Edit: May 10, 2005, 11:27:00 am by Martin »
Logged
--------------------------------------------------------
sl-c860 /w pdaXrom 1.1.0 Kathrin r121
CF 1GB , SD 2GB + 1GB + 512MB , MMC 512MB
Netgear MA701 WLAN 801b
Asus WL-HDD2.5 (very nice thing) /w 60 GB
--------------------------------------------------------
PC/Notebook SuSE 10.1 Prof. / KDE3.5.4
VDR /w KnoppMyth R5C7 (/w Myth 0.19)
--------------------------------------(August 2006)---

david_dahan

  • Newbie
  • *
  • Posts: 43
    • View Profile
    • http://
Usb Networking
« Reply #9 on: May 10, 2005, 04:30:57 pm »
Quote
Hallo Leute,

irgendwie steh ich grad auf dem Schlauch ... hab vor einigen Tagen ein Update von SuSE 9.2 auf 9.3 (mit neuem Kernel 2.6.11.4-20a-default) gemacht

Mein Zaurus hat bis jetzt einwandfrei mit hotplugscript über usbnet modul funktioniert ... jetzt geht nix mehr ... komischerweise funktioniert, erkennt aber der massstorage treiber und scsi emulation der Zaurus c860 im usb massenspeicher modus ...

seit dem funktionieren meine USB Maus und meine usbnet Anbinfung zum Zaurus nicht mehr ... USB Maus wird zwar durch hotplug erkannt, aber kein device zugewiesen und X kann nichts mit dem Eingabegerät anfangen.

Hat jemand eine Idee?

Hat sich am hotplug mechanismus seit SuSE 9.2 und altem kernel etwas geändert ... welche Rolle spielt dabei der neue udev mechanismus? Wieso funktioniert usbview nicht? Auch in /proc/.../usb/devices ist nicht drin ... *grummel*

Gruss
Marftin
[div align=\"right\"][a href=\"index.php?act=findpost&pid=79089\"][{POST_SNAPBACK}][/a][/div]

Hi Martin ,

Is it on the same subject ?

David.
Logged
SL-C750 running pdaXrom 1.1.0 Beta1
512MB SD
Linux SuSE 10.0 Laptop + desktop

david_dahan

  • Newbie
  • *
  • Posts: 43
    • View Profile
    • http://
Usb Networking
« Reply #10 on: May 10, 2005, 05:34:31 pm »
Quote
Quote
Hallo Leute,

irgendwie steh ich grad auf dem Schlauch ... hab vor einigen Tagen ein Update von SuSE 9.2 auf 9.3 (mit neuem Kernel 2.6.11.4-20a-default) gemacht

Mein Zaurus hat bis jetzt einwandfrei mit hotplugscript über usbnet modul funktioniert ... jetzt geht nix mehr ... komischerweise funktioniert, erkennt aber der massstorage treiber und scsi emulation der Zaurus c860 im usb massenspeicher modus ...

seit dem funktionieren meine USB Maus und meine usbnet Anbinfung zum Zaurus nicht mehr ... USB Maus wird zwar durch hotplug erkannt, aber kein device zugewiesen und X kann nichts mit dem Eingabegerät anfangen.

Hat jemand eine Idee?

Hat sich am hotplug mechanismus seit SuSE 9.2 und altem kernel etwas geändert ... welche Rolle spielt dabei der neue udev mechanismus? Wieso funktioniert usbview nicht? Auch in /proc/.../usb/devices ist nicht drin ... *grummel*

Gruss


Marftin
[div align=\"right\"][a href=\"index.php?act=findpost&pid=79089\"][{POST_SNAPBACK}][/a][/div]

Hi Martin ,

Is it on the same subject ?

David.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=79145\"][{POST_SNAPBACK}][/a][/div]


Dear All ,

I got samba working on my PdaX machine . Now I can see the C750 in the network .

many thanks for your help .

cheers,
David.
Logged
SL-C750 running pdaXrom 1.1.0 Beta1
512MB SD
Linux SuSE 10.0 Laptop + desktop

Martin

  • Full Member
  • ***
  • Posts: 138
    • View Profile
Usb Networking
« Reply #11 on: May 15, 2005, 01:36:52 am »
Hi david_dahan,

Sorry it was my mistake ... want to start a new thread ... because it is an other case with special fact ;-) ... but maybe someone other is able to help me

Are there other people with same problems on SuSE 9.3 ?

maybe it has something to do with the newer kernels ... I read a topic on "Openzaurus howto: usb networking" ... my problem is a little bit discribed there ... but can not get it work because no unconfigured usb0 is shown up ... lsusb not working, dmesg not showing any Z but recognizing a new device, Z shows up in usb storage mode.

Thanks a lot
Martin
Logged
--------------------------------------------------------
sl-c860 /w pdaXrom 1.1.0 Kathrin r121
CF 1GB , SD 2GB + 1GB + 512MB , MMC 512MB
Netgear MA701 WLAN 801b
Asus WL-HDD2.5 (very nice thing) /w 60 GB
--------------------------------------------------------
PC/Notebook SuSE 10.1 Prof. / KDE3.5.4
VDR /w KnoppMyth R5C7 (/w Myth 0.19)
--------------------------------------(August 2006)---
Pages: [1]
← previous next →