Author Topic: Usb Networking On Rc10 (Read 3923 times)

jam13 · « **on:** June 20, 2005, 08:04:32 am »

Hi,

Received my very first Zaurus a few days ago - a C1000 bought from Trisoft who I would recommend to anyone buying a Zaurus in the UK.

After a bit of a play around with the anglicised Sharp ROM, I decided I wanted something a bit more flexible and thought I'd try the OpenZaurus ROM. This looks very nice (Opie), but seems a bit too unfinished at the moment for real work, so I thought I'd have a go at the latest pdaXrom.

Installation went without a hitch, and almost all the functions I need seem to be working. The only exception is the USB device functionality which I cannot work out. I run usbdconfig and set the function to Net or Disc, plug the A-B cable in between my PC and the Z (B end in the Z), and then nothing. The (Windows XP) PC doesn't detect it at all.

If I plug a USB device into the Z (e.g. a BT adapter), the hotplug system picks it up fine and seems to configure it ok, so the USB drivers seem to be working.

Am I missing something or does the USB interface _only_ function in host mode at the moment?

Regards,
--
Jamie

jam13 · « **Reply #1 on:** June 21, 2005, 04:37:51 am »

No-one?

jam13 · « **Reply #2 on:** June 21, 2005, 11:21:44 am »

Hmmm.

Maybe I should rephrase my question:

Has anyone got USB networking to work on a C1000/3000 with pdaXrom 1.1.0 RC10?

--
Jamie

badog · « **Reply #3 on:** July 26, 2005, 01:59:57 am »

same problem in my C1000

lardman · « **Reply #4 on:** July 26, 2005, 07:10:00 am »

What does lsmod show?

Si

azalin · « **Reply #5 on:** July 26, 2005, 07:18:00 am »

Same problem here, I wanted to use the SD card emulation as it is easy to move files that way for me. The following thread may be helpful:
https://www.oesf.org/forums/index.php?showtopic=13680
although I did not manage to get that to work yesterday, but I only had a very brief time to try.

News:

Author Topic: Usb Networking On Rc10 (Read 3923 times)