Author Topic: Supernes Emulator - Works Great :) (Read 4749 times)

loji · « **on:** June 12, 2006, 12:28:31 pm »

I'm trying to find the correct feed with a SNES emulator .. the Cxx000 should definatly be able to run the emu without a problem.

is one available someplace? or is there an ipk i should use for the C1000?

anunakin · « **Reply #1 on:** June 12, 2006, 03:49:18 pm »

Are one on Unsable FEED:
http://www.pdaxrom.org/unstable

http://www.pdaxrom.org/unstable/snes9x-sdl_1.0_armv5tel.ipk

loji · « **Reply #2 on:** June 12, 2006, 04:20:32 pm »

Thank you

loji · « **Reply #3 on:** June 14, 2006, 10:47:20 pm »

Excellent

Finally had a chance to try it today.

It needs libstdc++.so.5 Which can be found here ->

libstdcxx5-compat_5.0.7_armv5tel.ipk

Once that was installed no problems .. since it used SDk, dont' start X before you use it.

So far I've played full boards of Donkey Kongs Quest, and Killer Instinct with no options and full sound!

This is on a C1000 w/ Beta 3 (Not overclocked at all) The roms are on a SD card, the emu is installed to /mnt/usr

The key combos are ->

A + S + D = high buttons
Z + X + C = low buttons
space = select
U+I = up
H= Left
K= Right
M+N = down
Enter + ok = start
Dialpad = up/down/left/right

Great work! This is amazing

Darth_Sith · « **Reply #4 on:** June 18, 2006, 12:05:57 pm »

Hi.
On c1000 beta1 I try to install snes, libsdl1.2.6 and libstdcxx, but not work..
I have this error:
relocation error: /lib/libsdl1.2.so.0: undefined symbol ecc ecc...

Anyone know how can I do?

loji · « **Reply #5 on:** June 18, 2006, 10:16:08 pm »

I only needed the two ipks here ->

libstdcxx5-compat_5.0.7_armv5tel.ipk

snes9x-sdl_1.0_armv5tel.ipk

I'm also using a default install of beta 3 --- so if your missing libraries, then you coudl try taking them out of the b3 image .. or check and make sure you have the feeds all set up. I installed the SNES package from the unstable feed itself instead of just pointing it to the ipk ---check the log to see if it got all the dependancies it needs.

Darth_Sith · « **Reply #6 on:** June 19, 2006, 03:46:51 am »

I have installed also libsdl1.2, nothing... It doesn't work..

loji · « **Reply #7 on:** June 20, 2006, 10:49:03 am »

try upgrading to beta 3

anunakin · « **Reply #8 on:** June 20, 2006, 12:09:10 pm »

Works nice in Beta4, too!

Darth_Sith · « **Reply #9 on:** June 20, 2006, 02:55:41 pm »

Mah..
On beta1 seems don't work..
I try to install beta4, but the result is that I 'm not able to install uboot (I use cf fat16, but nothing to do..).

deniscallies · « **Reply #10 on:** December 26, 2006, 05:19:15 pm »

Hello,
i love playing Terranigma on snes9x on Mac. Is it possible to bring my savegames into my zaurus? Would be great to play on work...

Thanks, Denis

InSearchOf · « **Reply #11 on:** December 26, 2006, 05:21:11 pm »

It should work as long as the files are placed in the correct place...

Late

relapse808 · « **Reply #12 on:** December 26, 2006, 06:08:11 pm »

Quote

It should work as long as the files are placed in the correct place...

Late
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149165\"][{POST_SNAPBACK}][/a][/div]

I have got this to work before, but not in fullscreen mode. Is there any way I can do this?

News:

Author Topic: Supernes Emulator - Works Great :) (Read 4749 times)