← previous next →
Pages: [1]

Author Topic: Help! My Zaurus Has Died!  (Read 4718 times)

pfschuyler

  • Newbie
  • *
  • Posts: 8
    • View Profile
Help! My Zaurus Has Died!
« on: November 15, 2006, 05:38:36 pm »
Greetings!

My SL-C1000 has just completely done dead on me. I was wondering if this had happened to anyone else. It was working perfect on a recent trip, and I came back home and then put it on the shelf. I now try to start it, and there is no response at all...just a dead black screen.

I've of course tried to remove the battery, recharge it, etc. There is the tiniest little rattling sound, which would imply that it had suffered an impact or something. The problem is, I don't remember ever dropping it! There are also no exterior signs of damage...its in great condition.

Has anyone had this issue before? Do you think if I sent it back to Japan they might fix it?

Thanks!

Paul Schuyler
Logged

daniel3000

  • Hero Member
  • *****
  • Posts: 1003
    • View Profile
    • http://
Help! My Zaurus Has Died!
« Reply #1 on: November 15, 2006, 05:48:04 pm »
Have you tried to enter the diagnostics menu or flash menu?

Try the following:

- Remove battery and AC
- Hold Fn+D+M keys firmly and during that
- reinsert the battery and switch the battery switch to the locked position
- Release the three keys

What happens?

daniel
Logged
SL-C3200 with weeXpc, based on pdaXrom 1.1.0beta3
HP 200LX with MS-DOS 5.0

pfschuyler

  • Newbie
  • *
  • Posts: 8
    • View Profile
Help! My Zaurus Has Died!
« Reply #2 on: November 15, 2006, 06:49:23 pm »
It worked! You're a genius!

It simply came back on, even though I had already tried the battery/ac combo. This is what's great about owning a Zaurus, the userbase of people like you that seem to know as much as the company's engineers. Thanks!

What do you think it was that was causing the problem?

Regards,

Paul Schuyler

Quote
Have you tried to enter the diagnostics menu or flash menu?

Try the following:

- Remove battery and AC
- Hold Fn+D+M keys firmly and during that
- reinsert the battery and switch the battery switch to the locked position
- Release the three keys

What happens?

daniel
[div align=\"right\"][a href=\"index.php?act=findpost&pid=146388\"][{POST_SNAPBACK}][/a][/div]
Logged

daniel3000

  • Hero Member
  • *****
  • Posts: 1003
    • View Profile
    • http://
Help! My Zaurus Has Died!
« Reply #3 on: November 16, 2006, 03:40:14 am »
Quote
It worked! You're a genius!

It simply came back on, even though I had already tried the battery/ac combo. This is what's great about owning a Zaurus, the userbase of people like you that seem to know as much as the company's engineers. Thanks!

What do you think it was that was causing the problem?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=146391\"][{POST_SNAPBACK}][/a][/div]

I really don't know what caused the problem.

However, I wonder if in your case the diagnostics menu came up (It should)?
Or did the Zaurus simply boot Linux again? That would be strange.

But good that it helped, one way or another  

After all these horror stories about "bricked" Zauri when I began to use the Zaurus, I have learned in the meantime that the Zauri are actually almost unbrickable.

daniel
Logged
SL-C3200 with weeXpc, based on pdaXrom 1.1.0beta3
HP 200LX with MS-DOS 5.0

pelrun

  • Sr. Member
  • ****
  • Posts: 366
    • View Profile
    • http://
Help! My Zaurus Has Died!
« Reply #4 on: November 16, 2006, 08:10:54 pm »
I think maybe your battery was very flat - even on AC the Z wont start unless there is some charge in the battery. The diagnostic key-ombos override that check.
Logged
SL-C3100 with usb power mod running debian eabi
pdaXii13 still on the NAND for dualbooting
16GB SDHC! (a new one, after I sat on the old one and it went kaput)
D-Link 660 wifi, Socket Bluetooth rev H
External 9800mAh LiIon battery and slimline dvd drive
Homebrew microphone and remote

Connell

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • http://www.src.wits.ac.za/~connell
Help! My Zaurus Has Died!
« Reply #5 on: January 01, 2007, 07:16:48 pm »
A few questions, for a C700 with the blinking mail light problem.
(I hope this question is in the theme of this topic)

--> From many other posts ... this seems to be a NAND problem

The service menu is accessible with the Fn+D+M procedure.

Before trying a NAND restore .........

......... What is NAND ?
.......... Are the PIM data stored there ?
.......... Can you backup the PIM data (perhaps as part of a system backup from the service menu) and the retrieve the PIM data .... somehow ?

....... a silly question ... where is the "reset" button on the C700 ?

Simon Connell
Logged

Capn_Fish

  • Hero Member
  • *****
  • Posts: 2342
    • View Profile
    • http://
Help! My Zaurus Has Died!
« Reply #6 on: January 01, 2007, 08:35:15 pm »
Quote
A few questions, for a C700 with the blinking mail light problem.
(I hope this question is in the theme of this topic)

--> From many other posts ... this seems to be a NAND problem

The service menu is accessible with the Fn+D+M procedure.

Before trying a NAND restore .........

......... What is NAND ?
.......... Are the PIM data stored there ?
.......... Can you backup the PIM data (perhaps as part of a system backup from the service menu) and the retrieve the PIM data .... somehow ?

....... a silly question ... where is the "reset" button on the C700 ?

Simon Connell
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149796\"][{POST_SNAPBACK}][/a][/div]

NAND is the flash memory where the OS and applications are stored, so, yes, the PIM data is stored there. I believe that you can do a NAND backup with your current setup, then mount it inside of a new installation and get data out. I have not done this, but I saw a thread somewhere (try searching for "mount NAND" or "mount backup" without quotes) saying you could do it. I would wait to try it until you know, however.

I think that there is no reset button on any 7xx or 8xx model. You just pull the battery out, as far as I know.

Hope this helps.
Logged
SL-C750- pdaXrom beta 1 (mostly unused)
Current distro: Gentoo

Cyberdoc1971

  • Full Member
  • ***
  • Posts: 168
    • View Profile
    • http://
Help! My Zaurus Has Died!
« Reply #7 on: January 01, 2007, 08:50:17 pm »
Quote
Quote
A few questions, for a C700 with the blinking mail light problem.
(I hope this question is in the theme of this topic)

--> From many other posts ... this seems to be a NAND problem

The service menu is accessible with the Fn+D+M procedure.

Before trying a NAND restore .........

......... What is NAND ?
.......... Are the PIM data stored there ?
.......... Can you backup the PIM data (perhaps as part of a system backup from the service menu) and the retrieve the PIM data .... somehow ?

....... a silly question ... where is the "reset" button on the C700 ?

Simon Connell
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149796\"][{POST_SNAPBACK}][/a][/div]

NAND is the flash memory where the OS and applications are stored, so, yes, the PIM data is stored there. I believe that you can do a NAND backup with your current setup, then mount it inside of a new installation and get data out. I have not done this, but I saw a thread somewhere (try searching for "mount NAND" or "mount backup" without quotes) saying you could do it. I would wait to try it until you know, however.

I think that there is no reset button on any 7xx or 8xx model. You just pull the battery out, as far as I know.

Hope this helps.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149801\"][{POST_SNAPBACK}][/a][/div]

Is there a way to check if you have any bad NAND?
Logged
"Whatever happens...Happens." - Spike Spiegel (My personal motto)
Archos PMA400 with Archos 1.14-2 Rom, & my own custom theme!
KA/Pi & KO/Pi (Best Address & Calander out there)
TKC Gallery (Best Viewer out there)
No Need For Memory Cards With a 30GB Drive
Nice to have the Built-In 802.11b Wi-Fi
Custom Leather Case
Custom Metal Stylus

Capn_Fish

  • Hero Member
  • *****
  • Posts: 2342
    • View Profile
    • http://
Help! My Zaurus Has Died!
« Reply #8 on: January 02, 2007, 02:01:54 pm »
Quote
Quote
Quote
A few questions, for a C700 with the blinking mail light problem.
(I hope this question is in the theme of this topic)

--> From many other posts ... this seems to be a NAND problem

The service menu is accessible with the Fn+D+M procedure.

Before trying a NAND restore .........

......... What is NAND ?
.......... Are the PIM data stored there ?
.......... Can you backup the PIM data (perhaps as part of a system backup from the service menu) and the retrieve the PIM data .... somehow ?

....... a silly question ... where is the "reset" button on the C700 ?

Simon Connell
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149796\"][{POST_SNAPBACK}][/a][/div]

NAND is the flash memory where the OS and applications are stored, so, yes, the PIM data is stored there. I believe that you can do a NAND backup with your current setup, then mount it inside of a new installation and get data out. I have not done this, but I saw a thread somewhere (try searching for "mount NAND" or "mount backup" without quotes) saying you could do it. I would wait to try it until you know, however.

I think that there is no reset button on any 7xx or 8xx model. You just pull the battery out, as far as I know.

Hope this helps.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149801\"][{POST_SNAPBACK}][/a][/div]

Is there a way to check if you have any bad NAND?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149802\"][{POST_SNAPBACK}][/a][/div]

I think there is an option to check your memory in the Fn+D+M menu.
Logged
SL-C750- pdaXrom beta 1 (mostly unused)
Current distro: Gentoo
Pages: [1]
← previous next →