I've gotten pdaXii13 running on my C3200 and everything is great! This is the best RO
M implementation I have seen on many Zaurii over the years!
Thanks to all who have helped me to get this installed and running.
Now I have a new challenge - I'd like to use my cell phone as a modem via Bluetooth. So far the only thing I can find on the subject is on Hluc's excellent page on pdaXii13:
GPRS network connection via Bluetooth also works. Make sure /etc/bluetooth/pin contains your PIN and then use the PPP config tool to configure the preconfigure GPRS profile to look for your phone. Then use the PPP dialer to connect to the phone to enable the GPRS connection.
I've done that, entering my Cingular information into the PPP config tool, and when I try to connect wiht the PPP dialer, it gives
"Failed to open /dev/rfcomm0: No such device"
/dev/rfcomm0 is specified as the device on the Modem tab of the PPP config tool, and was already filled in. It's just a plain text field, no other choices offered.
Based on some other threads (not for pdaXrom) it looks like hciconfig is to Bluetooth as ifconfig is to Wi-Fi, but when I run it it returns nothing.
The Bluetooth card is an AmbiCom BT2000-CF and cardctl ident says
product info: "Compact Flash", "Bluetooth Card", "", ""
manfid: 0x0319, 0x0000
function: 2 (serial)
I'm not sure where to go from here, I'd appreciate any help or advice.
TIA
Walt