Author Topic: Sl-c3000 - Usb Not Working !  (Read 12745 times)

sdjf

  • Sr. Member
  • ****
  • Posts: 447
    • View Profile
    • http://www.sdjf.wordpress.com and http://www.sdjf.esmartdesign.com
Sl-c3000 - Usb Not Working !
« Reply #15 on: April 05, 2009, 11:42:41 pm »
I have a different model, but want to chime in that getting USB to work properly has been difficult, I still cannot count on using it regularly.

But it isn't entirely clear where you are at with your problem at this point.  And are you still using Cacko?

If I were in your shoes, and did not care what ROM, I would make sure I was using one that definitely has USB enabled.  Then I would try getting just one low power device to work properly and understand how that works, before attaching a bunch of devices.

I don't know if this would help you, but I've found that the usbctl command makes a difference for inserting and ejecting devices.  Try the following to check your status:

usbctl status 0  (checks slot 0)
usbctl status 1   (checks slot1)

Maybe that will help.  To turn on for a slot 1, do:
 usbctl on 1    and to turn off (eject), I try:
 usbctl off 1   before taking out the device.
Maybe some of this will help.
« Last Edit: April 05, 2009, 11:44:13 pm by sdjf »
http://www.sdjf.esmartdesign.com
http://www.sdjf.wordpress.com
-----------------
sl5500 running Sharp ROM 2.38 (dead batteries)
sl6000L running Sharp ROM 1.12 (still working)
Opera 7.25 and 7.30
Socket CF 56k modem
3Com USB Ethernet Adapter
Toshiba, Lexar and Kingston SD cards
Lexar, Kingston and Transcend CF cards