Cacko Zaurus Qtopia ROM 1.21 is available!

[stupkid]

Ahh,

Shift + -

goodness!

[chris08]

Hi there,
I\'m using the latest and greatest Cacko QT Rom and have installed X/QT in it. While some programs from the pdaXrom feed work great (e.g. gimp and the Mac emulator basilisk 2) others fail because of a missing library (libgtk-x11-2.0.so.0). Can anyone point me to where I could get this lib?
Thanks for taking the time to read
chris

[padishah_emperor]

Anton, I\'m having some problems with the English-UK keymap [ctrl]+o gives me a { but [ctrl]+p gives either a £ pound sign or a square, where is the close brace } ?

Also the on-screen keyboard appears to have a problem when displaying capitals with the middle row reading:

ASDEFGHKL  instead of..
ASDFGHJKL

I don\'t know how to fix this, any help is appreciated.

-Francis

[ShiroiKuma]

My Anycom Bluetooth CF card won\'t get recognized.

When I plug it in, nothing happens, so I take it it\'s not recognized. This way I can\'t use Bluetooth.

What can I do to make the Cacko ROM recognize.

Can anyone help me? And after I recognize it, how do you use Bluetooth out of the box? Just set up some Networking connection?

[SharpEnd]

Anyone have screenshots of the CackO ROM on a c7x0?
Also, for the newbie, what are the pros/cons of this ROM vs the stock Sharp ROM on a c7x0?

Thanks,
Mike

[ScottYelich]

Anyone have screenshots of the CackO ROM on a c7x0?
Also, for the newbie, what are the pros/cons of this ROM vs the stock Sharp ROM on a c7x0?

Thanks,
Mike

uh

www.pdaxrom.org
http://www.pdaxrom.org/screenshots.php?menuid=2

etc

[padishah_emperor]

uh

www.pdaxrom.org
http://www.pdaxrom.org/screenshots.php?menuid=2

etc

I think he meant the Cacko QT ROM.

mls64, No there are no screenshots I know of. It looks the same as the stock ROM, no Java or Japanese dictionary though.

[SharpEnd]

Are these Cacko QT ROM screenshots from the French forum?
Click on the link and scroll down near the bottom.

Mike

[PowerZ]

Looks a lot like it, so it may be.

[padishah_emperor]

Are these Cacko QT ROM screenshots from the French forum?
Click on the link and scroll down near the bottom.

Mike

Yes it is, but it\'s been customized, he made his own themes, did the same following his instructions.

[maslovsky]

Anton, I\'m having some problems with the English-UK keymap [ctrl]+o gives me a { but [ctrl]+p gives either a £ pound sign or a square, where is the close brace } ?

Also the on-screen keyboard appears to have a problem when displaying capitals with the middle row reading:

ASDEFGHKL  instead of..
ASDFGHJKL

I don\'t know how to fix this, any help is appreciated.

-Francis

There seems to be a conflict between { } characters defined in /home/zaurus/Settings/keyhelper.xml and pound sign defined in UK keymap (/home/zaurus/Applications/cyrillica/english-uk).

To fix this, you\'ll have to sacrifice one of the symbols - either remap pound sign to another key by editing english-uk keymap or remap { } symbols defined in keyhelper.xml.

Also english-uk  file contains definitions for characters to be displayed on the on-screen keyboard. You can update it.

Please, send me the updated keymap file, so that I can include it into the ROM hotfix update.

[maslovsky]

My Anycom Bluetooth CF card won\'t get recognized.

When I plug it in, nothing happens, so I take it it\'s not recognized. This way I can\'t use Bluetooth.

What can I do to make the Cacko ROM recognize.

Can anyone help me? And after I recognize it, how do you use Bluetooth out of the box? Just set up some Networking connection?

This is unusual, your card should be supported. Please, post or send me me the output of the following commands when you insert your card after you reboot your zaurus.

dmesg
lsmod
cardctl ident
cardctl status
cat /var/lib/pcmcia/stab

[ShiroiKuma]

OK. I did a reboot. Then entered the card. Then I get the following:

dmesg
Linux version 2.4.18-rmk7-pxa3-embedix-021129 (maslovsky@linux) (gcc version 2.95.2 19991024 (release)) #1 Tue, 06 Apr 2004 00:41:29 +0400
CPU: Intel XScale-PXA255 revision 6
Machine: SHARP Shepherd
Converting old-style param struct to taglist
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),27648k@7168k(root),-(home) jffs2_orphaned_inodes=delete LOGO=1 LAUNCH=q
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62012KB available (1884K code, 470K data, 100K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 2
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 161
batok installed
Starting kswapd
Journalled Block Device driver loaded
JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: W100FB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 14) is a 16550A
ttyS01 at 0xf8700000x (irq = 12) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 13) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
corgi remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
PPP BSD Compression module registered
ide_cs.c 1.26 1999/11/16 02:10:49 (David Hinds)
Corgi audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on \"sharpsl-flash\":
0x00120000-0x007f0000 : \"Filesystem\"
NAND device: Manufacture ID: 0xec, Chip ID: 0x79 (Samsung K9D1G08V0M)
Creating 3 MTD partitions on \"Samsung K9D1G08V0M\":
0x00000000-0x00700000 : \"smf\"
0x00700000-0x02200000 : \"root\"
0x02200000-0x08000000 : \"home\"
Linux Kernel Card Services 3.1.22
  options:  [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.22)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
Backlight Driver Initialized.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 © 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 381
jffs2_scan_inode_node(): CRC failed on node at 0x01acebd4: Read 0xffffffff, calculated 0x128db808
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 100K
Inode #5004 was a directory with children - removing those too...
Inode #5006 was a directory with children - removing those too...
Inode #3874 was a directory with children - removing those too...
Inode #4914 was a directory with children - removing those too...
Inode #4919 was a directory with children - removing those too...
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
SD Driver Initialized.
sharp_mmcsd 0.21 27 Sep 2002
VFS: Disk change detected on device mmcd(60,1)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
VFS: Disk change detected on device mmcd(60,1)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
VFS: Disk change detected on device mmcd(60,1)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
VFS: Disk change detected on device mmcd(60,1)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
VFS: Disk change detected on device mmcd(60,1)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
VFS: Disk change detected on device mmcd(60,1)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg=\"\")
net_fd 0.1 035 2002-06-12 20:00 (dbg=\"\",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
pxa_bi 0.1-alpha 035 2002-06-12 20:00 (dbg=\"\")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
monitor_modinit: finished
BlueZ Core ver 2.3 Copyright © 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>

lsmod
Module                  Size  Used by
bluez                  32464   0 (autoclean)
pxa_bi                 21440   0 (unused)
net_fd                 25024   0 (unused)
usbdcore               34544   0 [pxa_bi net_fd]
usbdmonitor             5248   0
sharp_mmcsd_m          25936   1

cardctl ident
Socket 0:
  product info: \"BTCFCARD\", \"LSE139\"
  manfid: 0x0264, 0x000b
  function: 6 (network)
Socket 1:
  no product info available

cardct status
Socket 0:
  3.3V 16-bit PC Card
  function 0: [ready]
Socket 1:
  no card

cat /var/lib/pcmcia/stab
Socket 0: empty
Socket 1: empty

Thanks a lot for your help

[maslovsky]

Looks like your Anycom card may have a newer revision. Try to add the following into /etc/pcmcia/bluetooth.conf:

card \"LSE139 Bluetooth Compact Flash Card\"
  manfid 0x0264, 0x000b
  bind \"bluecard_cs\"

Then reboot your Zaurus. If the card does not work after that - you may be out of luck...

[ShiroiKuma]

Thank you very much for helping me.

I wasn\'t out of luck   Luckily  

I edited the /etc/pcmcia/bluetooth.conf file as advised, rebooted.

Then the Zaurus recognized the card when inserted, the card\'s light goes on now and I see a Network icon in the task tray. I guess that\'s because I created some Bluetooth network connection just to see.

So again, thanks a lot, really.

Now I have to figure out how to use the Bluetooth to connect with my phone.

I\'ll check the how-to that\'s available here and see. However, if anyone can give me quick advice in what to do, I\'d be gracious, though I know, this question is probably not for this thread  :oops:

Anyway I\'ll try...

Thanks...