Author Topic: seeing 5600 on windowsXP network (Read 4117 times)

tmszewczuk · « **on:** January 01, 2004, 08:38:01 pm »

I\'m 5600 newbie. I purchased 10mbit Socket CF network card and installed it to do internet mail and minor browsing (works great). I would like to be able to \'see\' zaurus in \"My Network Places\" on my network.
I have the 5600 pluged into a linksys BEFSR41 DSL/Cable router (DHCP). I can ping both ways (5600--]my workstation and vice versa). Do I have to mount the zaurus filesystem using samba? If so what are the commands?

Thank
Tom

Anonymous · « **Reply #1 on:** January 01, 2004, 08:49:12 pm »

http://notebook.zaurii.net/zaurus/samba1.htm

zack

That link is for the sl5500, but should work on 5600 too. The links could be old...get the latest smbmount.

Tehas · « **Reply #2 on:** January 03, 2004, 01:13:54 am »

I also have a SL5600 and recently got Samba working so that I can see my Zaurus in my Network Neighborhood (but on different versions of Windows). As soon as the network card is inserted to the Z it becomes visible because the Samba stuff is included with the 5600\'s release.

I wrote up the steps that I followed and posted them to this thread:
http://www.zaurus.com/dev/board/index.php?...indpost&p=44841

tmszewczuk · « **Reply #3 on:** January 03, 2004, 06:35:16 pm »

I want to retain usb0 \'sync\' function for email, contacts, tasks and calender.
Do I add new interface eth0 interface?

tmszewczuk · « **Reply #4 on:** January 03, 2004, 11:14:48 pm »

http://www.zaurus.com/dev/board/index.php?...indpost&p=44841

Followed all steps with one exception:
smb.conf \'interfaces = \' setting appended eth0 to existing usbd0 and this leaves
zarurs sync and file transfer intact.

In network neighborhood I can\'t connect using \'zarurshome\' but can connect using
it\'s network ip address (192.168.1.101home and 192.168.1.101system)

Tehas · « **Reply #5 on:** January 03, 2004, 11:31:49 pm »

Even with the instuctions that I wrote up, I can still synch & use Zaurus file transfer via USB and Samba via ethernet (but not both at the same time). If I have the ethernet card in the CF slot and put the Z in the cradle then I get messages pop up on the Z saying that there is a IP address conflict.

Glad you got it working.

tmszewczuk · « **Reply #6 on:** January 04, 2004, 01:40:55 pm »

One more item:

I want to see zaurus root (\'/\') home directory on my XP workstation.
Where do I install the symlink to \'/\' -or- does smb.conf need to be modified to accomplish this? :?:

tumnus · « **Reply #7 on:** January 04, 2004, 05:37:01 pm »

Run the following command as root:

ln -s / /home/samba/.root

Then the folder \'.root\' will point at the root of the Zaurus filesystem.

tmszewczuk · « **Reply #8 on:** January 08, 2004, 10:55:47 pm »

Thanks for all the advice.
I have configured my zaurus 5600 and it can be seen on the network and I can move files to and from easier and faster.

Thanks!!!!

News:

Author Topic: seeing 5600 on windowsXP network (Read 4117 times)

Anonymous