Messages

1

Angstrom & OpenZaurus / Opie-mail On 3.5.3 Won't Work

« on: April 26, 2005, 07:28:44 am »

If you re-flash your Zaurus

You sure this is necessary...?

Actually I don't understand what you're trying to say in your post - leave root enabled? do you mean install to root?


Si
[div align=\"right\"][a href=\"index.php?act=findpost&pid=76881\"][{POST_SNAPBACK}][/a][/div]

Maybe try, in a console, this :  ipkg-link mount /mnt/card/packages
Then restart opie an try again

2

Angstrom & OpenZaurus / Openzaurus 3.5.3 Pre-release

« on: March 18, 2005, 05:31:44 am »

Warns about using an unexpected kernel on boot, then sleeps for a minute, boots fine after that though.

Ooops, that's my fault. I'll upload a new ROM later today. You shouldn't bee seeing this in the official release. But don't worry, apart from the warning, the kernel does match the initrd.bin.

Have you done the change ? It still sleep 1min at boot time  

3

Angstrom & OpenZaurus / Msn Not Working In Qpe-gaim

« on: January 04, 2005, 08:47:46 am »

To be able to use MSN, I disabled all feed and add the qpe-gaim feed. I remove gaim and the reinstall it. I use libcompat on gaim. Then it works fine. A bit slower but it works.

4

Angstrom & OpenZaurus / Msn Not Working In Qpe-gaim

« on: December 31, 2004, 09:24:52 am »

I found the answer in gaim's FAQ.  Here it is:

Q.     
MSN won't load!
A.    
Make sure you have the required SSL support packages. See the installation instructions for more information.

So what did you install exactly ?

5

Angstrom & OpenZaurus / How do I sync in windows with OZ 3.5.1?

« on: October 29, 2004, 08:45:42 am »

I was using qtopiaddesktop on my XP box for syncing with the Z.

Now I use Pi-Sync, in fact, I use kopi/kapi on my XP and the replace the files on my Z. And from my Z to my XP.

I don't know about anyone else, but I still don't get it. My understanding of Pi-Sync was that you had to have a working TCP/IP connection between Windows and the Zaurus so that you could sftp the Pi-X files to the Windows box temporarily in order to sync the data. That is, Pi-Sync has a procedure to reconcile data between two addressbook or datebook files, but the connectivity issue is SEP (Someone Else's Problem). Not so?
How do you establish a TCP/IP connection using the USB cable between a Zaurus (pref. a 5600) running OZ 3.5.1 and Windows 2K or XP??
Is this one of those things that everyone but me knows?

Windrose

The way I do the sync with the Py/Sync project is very simple (no tcpip) I just copy the file (mycalendar.ics) to the Z and when I use it whith the Z I copy it back to windows (using a CF or a SD).

6

Angstrom & OpenZaurus / How do I sync in windows with OZ 3.5.1?

« on: October 26, 2004, 08:15:29 am »

Hi,

I was using qtopiaddesktop on my XP box for syncing with the Z.

Now I use Pi-Sync, in fact, I use kopi/kapi on my XP and the replace the files on my Z. And from my Z to my XP.

hope it helps,
Francois.

7

Angstrom & OpenZaurus / USB Network down after 15 sec

« on: September 15, 2004, 09:10:57 am »

Hi,

yes I have tried reinstalling driver and shut down my firewall but still the same.

From the network window, I can see that the connection is enabled. But I can olnly ping the usb craddle and not the Z (time out). If I remove/replace the Z I can ping it but for only a few sec.

Hope this may help to find a solution   .

8

Angstrom & OpenZaurus / USB Network down after 15 sec

« on: September 15, 2004, 05:50:20 am »

  am I the only one having this problem ?

9

Angstrom & OpenZaurus / USB Network down after 15 sec

« on: September 10, 2004, 09:46:40 am »

Hi all,

I have a little problem with the USB Network AND my Zaurus 5500 running
OZ 3.3.6 while syncing with QTopiaDesktop on my XP box. When I put the Z
in the cradle it is up for 15 to 20 sec then I have to remove it, wait a
few sec then replace it into the cradle and it is up again for 15 sec.

What is wrong, is there something to do ?

Regards,
Francois.

10

Software / ozone - OpenZaurus cloning tool

« on: May 27, 2004, 12:21:26 pm »

Hi all,

I try to use ozone but it still says
\"Checking zaurus connectivity.....
Cannot locate zaurus. Check the connection to the zaurus, and that the IP is correct\"
But I am able to sync with QTopia Desktop !!!!

can someone tell me wha to do ?

Thanks,
Francois.