Messages

1

Sharp ROMs / Cacko 1.22 And Linksys Wcf12

« on: January 05, 2005, 09:38:05 am »

I have problem to connect using linksys WCF12

If i type ./hostap resume eth0
i see ioctl() device or resource busy

if i type iwconfig
i see something about wifi0  and eth0

In hostap_cs.conf
i see my card with one line commented - manfid

What should i do ?

syslogd after inserting card says
/etc/hotplug/net.agent : register event for eth0 not handled
and executing ./hostap suspend eth0

2

General Discussion / Charging battery problem - c860

« on: September 22, 2004, 04:18:27 pm »

Lastlly i have problem with charging battery in my zaurus (c860)
When i plugin ac battery voltage rasie for about 0,05-0,15v but nothing happend - ac was plugin for about 2-3 hours but battery had the same voltage  ie 3.48 (voltage from battery applet) before and after
When I meansure it with multimeter it shows about 3,7 v
So i removed battery and plugedin ac and mensure voltage on stick inside battery package it shows 3,1 v

Anyone have same problem ? how to resolve it ?

I tryied to charge battery "manually" - no problem mulimeter showed 3,01v before and 3,8v after
So it have be something in zaurus

Changing battery voltage adjastment in service menu didnt help - now it is 204

3

Accessories / Almost there with bluetooth, but need some help.

« on: September 09, 2004, 07:58:35 am »

Thanks
LCP said something about chanell 18
So i changed it to 18
Now i have some problem with bluetooth

Can't get terminal parameters: Input/output error

i change pin to 9999
Every time i try to connect i have to get pin on my siemens ?
What's wrong now


I change value in pin and givepin


I can connect thru irda with smaller problem (sometimes zaurus dosent see siemens)

4

Accessories / Almost there with bluetooth, but need some help.

« on: September 09, 2004, 01:23:28 am »

I get something like this

Connection: ppp0 <---> /dev/rfcomm0
lcp: timeout sending config-request
Connection terminated
Exit

I dont how to fix it ?

5

General Discussion / Unrecognized option /dev/rfcomm0

« on: September 03, 2004, 05:27:07 am »

A have above message in /tmp/qpe-pppd-log

It happend after i added line /dev/rfcomm0 in /etc/ppp/peers
What should i install into my box ?
'sdptool browse' find my phone

6

Security and Networking / Dlink DCF650BT bluetooth card

« on: September 01, 2004, 10:21:17 am »

What ROM are you using?
cacko 1.21.b

What Bluetooth packages have you installed so far?
bluez only

You should not be installing any additional bluez packages on 1.21b ROM. Just edit the /etc/bluetooth/uart like mentioned abopve and reinsert the card.

I dont have /etc/bluetooth/uart file
even /etc/bluetooth/ dir

7

Security and Networking / Dlink DCF650BT bluetooth card

« on: August 17, 2004, 06:39:17 pm »

What ROM are you using?
cacko 1.21.b

What Bluetooth packages have you installed so far?
bluez only

What howtos have you followed?
http://zaurususergroup.com/modules.php?op=...ename=Bluetooth

What is the output of 'cardctl ident'?
Socket 0:
product info "Bluetooth BT0100M","",""
function: 2 (serial)
Socket 1:
no product info available


Zaurus 860, bluetooth dlink DCF650BT H/W A1

8

Security and Networking / Dlink DCF650BT bluetooth card

« on: August 13, 2004, 07:33:22 pm »

When i try to find any devices by typing 'sdptool browse'
I get something like this
-----------
Inquiring ...
Inquiry failed
-----------

cat /dev/rfcomm0
No such device

   

9

General Discussion / CF Bluetooth for Z860

« on: August 01, 2004, 12:18:47 pm »

Could you say which CF bluetooth should i choose for my Z860 cacko 1.21b
to install it without huge problem
Or maybe please say which do you use with Z860

10

General Discussion / New HOW-TO=Fixing Non-Charging CX00 Battery

« on: July 27, 2004, 08:19:14 am »

Aussie-> So can you say what value did you set ? maybe not you ... what value zaurus did set in adj batt ?

Omicron-> thanks but ive charged it by homemade charger of camera charger
and it seems i have fully charged one

11

General Discussion / New HOW-TO=Fixing Non-Charging CX00 Battery

« on: July 27, 2004, 04:32:53 am »

Ehhh  i can read howto
Ive done exactlly in this way but i dont have external charger for zaurus battery so i want to know correct value of adj batt - of course im thinking about value if you have full battery (4.2 v) or default value
Anybody ?

12

General Discussion / New HOW-TO=Fixing Non-Charging CX00 Battery

« on: July 26, 2004, 07:04:50 pm »

Hmmm im little confused .....
multimeter shows 4,2 v
service menu 2,8 v
and cacko 3,79 v
Which of this value is correct - i believe multimeter but who knows....
In service menu i set battery memory to only 217; delta is about 435 - should i have this value about 600 ?

13

General Discussion / Service menu on 860

« on: July 25, 2004, 05:16:07 pm »

Ok, thanks for perfect answer  

I enter in to service menu page 2 option 6 flash value to 192
But still have some problem zaurus shows "external power disconnected" when ac/dc power is plugged


Need more help

14

General Discussion / Service menu on 860

« on: July 25, 2004, 04:29:33 pm »

Ive entered in to "some" menu, maybe service (all is in japanish - maybe you know how to change it)
I'm asking because prevously i had z 5600 i there was diag, service and maybe one more menu

Menu has only one page and 4 option - i know that 4th is for rom/nand upgrading, but where can i find battery adjustment ?
Please write step by step - maybe i only dont know how to go to second page of menu


Thanks

15

General Discussion / Service menu on 860

« on: July 25, 2004, 09:02:58 am »

I have problem with recharging battery and i try to find solution
Ive found  Battery or recharge circuit problem - C860 howto
but i cant go into service menu
i'm holding D+M keys and nothing heppend
Who helps