Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Kerensa

Pages: [1] 2
1
C1000/3x00 General discussions / Cacko3k Feedback
« on: November 24, 2005, 03:42:34 am »
Just flashed to this ROM and cleared as detailed. Its great!

I found an instance when the cyrkeyboard and time displays become corrupt. When the Z is open in clamshell and a vertical display app is launched. Rotation into vertical the issue remains. If the app is closed wile in clamshell it returns to normal.

The Z will also reboot in the following case:
1. Z open in clamshell
2. Launch vertical app - backgammon for instance (corrupt keyboard)
3. Rotate Z into vertical closed (corrupt keyboard)
4. Close the app
5. Rotate screen to clamshell

k

2
C1000/3x00 General discussions / Wellenreiter And Kismet On Cacko
« on: November 23, 2005, 01:37:25 am »
I'll add my two cents. I have a C3000 with the Cacko beta. Installed libpcap, libopie1, libopie2,  and wellenreiter from the cacko feed, but when I ran from terminal the app wanted the older version of libpcap (0.7.2). Found this version and installed it. Tried this for a bit with different cardctl commands before running wellenreiter, no luck. But it was at least running now.

What got the scan up and going is running wellenreiter from the terminal and AFTER it was going connect my card to the wireless ad-Hoc described http://www.users.on.net/~hluc/myZaurus/cus...ml#wellenreiter

Any ideas on a cleaner method?

3
C1000/3x00 General discussions / Wellenreiter And Kismet
« on: November 22, 2005, 10:38:33 pm »
http://tux.ius.edu/zaurus/wellenreiter/

I tried to install on C3000 with the cacko beta and it was not recognized by the installer. Maybe you will have better luck.

4
C1000/3x00 General discussions / Email On The C3000 - A Lost Cause?
« on: November 22, 2005, 08:42:06 pm »
I am trying to set up Google email with the Sharp Email client. I made the changes to inedt.conf, but can't seem to locate the stunnel directory. I just moved tp the c3kb1 ROM.  Any suggestions?

Thanks

I installed openssl from http://killefiz.de/zaurus/showdetail.php?app=2434
 
made the changes to inedt.conf and using the settings here
https://www.oesf.org/forums/index.php?showt...indpost&p=91967

Now have kopiemail working with gmail.

5
User Request for Applications / Tangrams For Z
« on: November 22, 2005, 08:37:12 pm »
I enjoy playing tangrams but haven't found one to run on the c3000. Anyone know of a package that will work? What about thoughts on getting this one to work? http://gtans.sourceforge.net/

6
Software / Sharp Zaurus Heart Beat Monitor
« on: April 16, 2005, 04:13:19 am »
Quote
i know that it can be done with the irda hardware. I saw that on a Palm.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=75439\"][{POST_SNAPBACK}][/a][/div]

This application requires that you feel your pulse and press the screen with the stylus when you feel a beat. It does not use the screen to feel your pulse itself.

7
C1000/3x00 General discussions / Ti-85 Emulator
« on: April 07, 2005, 11:17:27 pm »
Quote
right]


Oh I got it to turn on, but then it stops.
I can press any button and the button will visually depress, but thats all that happens. The ti85 display stays the same  with the "mem cleared defaults set" mesage staring at me, then yelowish lines appear in the display.

Im stumped
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

Hmmm.. Well here is the link to the [a href=\"http://216.239.39.104/translate_c?hl=en&u=http://web.tiscali.it/magazzinocartoniani/&prev=/search%3Fq%3Dti85%2Brom%2Bdownload%26start%3D20%26hl%3Den%26lr%3D%26c2coff%3D1%26sa%3DN]TI 85 ROM[/url] that I'm using, give this one a try.

I am using the .72 version. I'm not savy enough yet to know what differences may matter in terms of the Sharp ROM or kernel. I am using the 1.11 ROM and the 17h kernel from the tetsu site.

I'd be interested to know what you find that allows it to run.

8
C1000/3x00 General discussions / Ti-85 Emulator
« on: April 07, 2005, 10:37:35 pm »
Quote
OK so I did get it to install, and supplied teh TI85 rom and configured it so it knows where the rom is. It starts, and then just seams to lock up.
you can tap any button, and it visually goes down but nothing happens.

Any ideas?

Thanks
[div align=\"right\"][a href=\"index.php?act=findpost&pid=74143\"][{POST_SNAPBACK}][/a][/div]

The emulator is like the TI 85.. You have to press ON. At least that is what took me a bit to figure out. And it will turn itself off after a few moments. I apologize if you tried this already, sometimes I miss the easiest things

Were you able to install the newer version once you had the ROM or did you go with the version from the feed?

K

9
C1000/3x00 General discussions / Ti-85 Emulator
« on: April 07, 2005, 12:54:54 am »
I wasn't able to install that ipk either. But I did get the version here to install

http://www.zaurususergroup.org/feed/zti85emu_0.72_arm.ipk

You do need to have the TI 85 ROM for it to work.

Regards,
Kerensa

10
C1000/3x00 General discussions / Sl-c3000 New (jp) Rom Released (v1.11)
« on: February 27, 2005, 08:56:40 pm »
Quote
Please back up the main body memory in preparation for the emergency before it updates it.
Please see the manual about the backup method.

What backup does this refer to? The method  for NAND Flash backup?

Thank you,
K

* edit * I have mine updated. Thanks

11
Accessories / Virtual Projection Keyboard
« on: February 22, 2005, 11:23:18 pm »
Check out the cool projection keyboard.

http://www.virtual-laser-keyboard.com/

Has anyone tried one of these out?  Talk about a space saver!

K

12
Personal Java/Jeode/J2ME Personal Profile / Java On The C3000
« on: February 22, 2005, 07:42:09 am »
I followed these instructions for my C3000 http://augustin.vidovic.org/pages/java_on_...3000/index.html

I also installed the jeode package from the feed www.cacko.biz/cacko/feed

I'm still learning, but these seemed for work for different java apps on the C3000.

Regards,
Kerensa

Quote
Damn, does that mean that there is no way to run annd/or compile java applications for the C3000?

I bought the Zaurus b/c I thought that I could write my own application for it in Java. I didn't realize that the C3000 was the end of the line ....

If anyone knows how to get a JVM for the C3000 please let me know.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=68160\"][{POST_SNAPBACK}][/a][/div]

13
Security and Networking / Kismet Not Working
« on: February 21, 2005, 02:51:23 am »
Try creating a "dummy" network service with the following settings.

ESS-ID: any
Network type: Ad-Hoc
IP address: 10.1.0.2
Subnet mask: 255.0.0.0
Gateway: 10.1.0.1
DNS: 10.1.0.1

Connect to this service and then run kismet. This worked for me on the C3000. The settings above just serves to keep the card from timing-out.

See the howto at http://www.zaurususergroup.org/modules.php...0the%20SL-6000L

Regards,
K

Quote
Hi i have cacko rom 1.22a, i downloaded kismet (and kismet qt) from cacko feed and the libpcap0.8.
I am using a Symbol Spectrum24 wifi card.
When i started kismet, my wifi card just starts blinking the led. but after a few seconds i get the error: Cant connect to the server.

why???
how i can get kismet working???

Thanks
[div align=\"right\"][a href=\"index.php?act=findpost&pid=68004\"][{POST_SNAPBACK}][/a][/div]

14
Software / Scorch Or Keen For Z
« on: February 20, 2005, 09:50:09 pm »
Does anyone have a compiled ipk of "Scorched Earth" that should run on the C3000?

Also interested in Commander Keen

I'm working toward doing my own compiles, but not there yet.

Thanks,
K

15
Software / Kino2 0.4.2 Is Out
« on: February 19, 2005, 09:03:50 pm »
Quote
can people who managed to have it running on c3000 tell wich kernel they're using please ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=67887\"][{POST_SNAPBACK}][/a][/div]

I have it running on my c3000 running the sharp kernel with the v17g kernel updates from tetsu. I installed the mplayer with IWMMX, the C300 video driver and the Kino2 0.4.2 ipk with no issues.

Regards,
K

Pages: [1] 2