Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - alfie

Pages: [1] 2
1
Quote
Dunno if this will help but in order to get my symbol/5500 to work with my mixed mode b/g router, I had to disable WEP. 'course this is a known issue on the 5500 so it may not apply to your setup.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=73158\"][{POST_SNAPBACK}][/a][/div]

I had WEP disabled all along

2
I've got a zaurus C700, Cacko 1.22, and a Symbol Spectrum24 card (LA-4137).

It works perfectly fine when I set the router at B-Only mode. When I set it to G (Obviously), and Mixed modes. The card doesnt work at all (It says connectring, light blinks a bit, but no AP mac address and it fails)

Any ideas ? I've managed to get a B card working on my notebook via pcmcia, and also a G card working. But for the zaurus, my network has to be set at B only. This is quite a pain as there are places I dun have control of.

Any idas/hacks ?

3
Sharp ROMs / Perl Ipk For Cacko
« on: March 18, 2005, 10:11:11 am »
Anyone ? Not concerned bout size since I'm using cacko lite on this zaurus...

4
Sharp ROMs / Developement Environment For Sharp/cacko
« on: March 17, 2005, 11:14:58 am »
Looking to cross compile some apps to my cacko based rom, what's needed?  Alraedy got GCC,etc on my linux box (not zaurus, an actual box. lol)

Anyone got links ?

5
Zaurus - pdaXrom / Dosbox On Zaurus :)
« on: March 17, 2005, 09:51:47 am »
Qn: If DosBox is an SDL app, why does it need X ? Or does it ?

6
Accessories / Ea-bl08k Battery For C-700
« on: March 17, 2005, 12:07:04 am »
Looking to get an extended battery for my C700, and maybe the USB charger.

Anyone knows any good shops that ship internationally ? (I live in Singapore)

7
Zaurus - pdaXrom / 1.05 Vs Rc9 :)
« on: March 16, 2005, 11:28:54 pm »
Debating on which version to install... 1.05 or RC9

My usage requirements will be speed (Are either/both using the new kernels that enable to C700 to go faster, forgot the name of that patch) Since both SDKs are out, I can always compile up my own apps if needed.

So is there any glaring problems with 1.05, or should I just take the jump to RC9 ?

8
Zaurus - pdaXrom / Dosbox On Zaurus :)
« on: March 16, 2005, 11:19:09 pm »
I'm already reflashing to pdaXrom  Will be very happy to get the latest dosbox 0.63 from you.

I'll be running stuff w/o sound.  Hoping for the best.

Does the dosbox for pdaXrom uses X11 or SDL ? Is it possible to start it w/o starting X Then if its using SDL-framebuffer ?

Alf
-

Quote
Eh...
This one? -
or this -  https://www.oesf.org/forums

DOSBox will run in SDL on Sharp-based roms, as well as X,
so it's not a technical requirement;  but most of the other interesting
emulators require X, so if you want to emulate things *other* than DOS,
as well, go with pdaXrom.

Additionally, I've noticed some keyboard quirks under SDL-framebuffer
that I don't see under X11, in DOSBox, so it may be a good idea anyway.

Now...  DOSBox builds prior to 0.62 seem to run fine, but >0.61 are BROKEN
by default, due to memory alignment  problems.  I'll post a patch for 0.63 if
you're interested; but I build binaries for pdaXrom only.

DOSBox IS SLOW.  Games that are largely CPU-bound  (or which halt on user
input frequently) have a subjective feel of a high-end 286, or low end 386.
Games that are heavily graphics-intensive have performance about that of an XT
or worse.   Think "80286-12" on average.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=70983\"][{POST_SNAPBACK}][/a][/div]

9
Zaurus - pdaXrom / Perl 5.8 ?
« on: March 16, 2005, 12:09:43 pm »
My fault, I had browsed the packages via the web interface @ pdaxrom.org

Woopies !

Quote
Sure it is there, perl 5.8.5 at http://mirror1.pdaxrom.org/current/; it is 2.7 MB.

Quote
Anyone knows any good perl packages for pdaXrom ?

Couldnt find any even on the unstable feeds.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=70971\"][{POST_SNAPBACK}][/a][/div]
[div align=\"right\"][a href=\"index.php?act=findpost&pid=70974\"][{POST_SNAPBACK}][/a][/div]

10
Zaurus - pdaXrom / Perl 5.8 ?
« on: March 16, 2005, 11:47:39 am »
Anyone knows any good perl packages for pdaXrom ?

Couldnt find any even on the unstable feeds.

11
Zaurus - pdaXrom / Dosbox On Zaurus :)
« on: March 16, 2005, 11:30:13 am »
I'm an old game freak. Got tons of my XT games all nicely archived, was hoping to play them on my zaurus (C-700)

I've been reading around and realise dosbox and most of the dos emulators work only on X, so I'm venturing on getting pdaXrom installed instead of cacko-rom. (I dun use my zaurus as a pda anyway, more of a platform for code editing (joe) and viewing files.

Anyone knows of any good sites for dosbox on the zaurus ?

12
General Discussion / Tickypip Cant Find Level Files :(
« on: January 20, 2005, 06:46:43 am »
i copied all my nw*.pdb files over to /opt/Qtopia/share/tickypip/levels  but it didnt work. These are my old pdb files from my palm/SL-5500 days. Only thing changed is tickypip i guess. Was this changed ?

When i started the game it just shows a blank list (no map packs)

*sob*  

13
Accessories / Can The C700 Kill An Sd Card ?
« on: January 19, 2005, 11:51:28 pm »
nope. no format, both were vfat.

i used swap on them though, gonna stop using swap for now.

getting a ridata 512mb hispeed later

alf
-

Quote
Quote
Heh..

Got me a new C700, installed cacko, love it.

I got a new toshiba 1gb SD card, works fine on pc and the zaurus.

3 days later, the zaurus keeps hanging on me, a reflash didnt work.

I plugged out the sdcard and it worked ! (grrr), plugging it in my pc detects as "no card detected"

So its busted, going for a 1-1 replacement later.

Just wonder, has anyone managed to kill a SD card before ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=61558\"][{POST_SNAPBACK}][/a][/div]


Did you format your SD card with ext2?

I got 2 dead Panasonic 256 MB SD  and one dead Kingston 512 MB SD on my Z's.

All three ext2 formatted.

Now I do not format any SD-Card with ext2 any more...

z.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=63177\"][{POST_SNAPBACK}][/a][/div]

14
Accessories / Can The C700 Kill An Sd Card ?
« on: January 19, 2005, 06:43:55 am »
OK, this is really bad..

1 weeks after I got my toshiba 1gb SD card replaced, its dead AGAIN. (After 1 week of normal operation)

Gonna get it replaced and maybe use it on my notebook/pc. Gonna try out other brands of SD.




Quote
Heh..

Got me a new C700, installed cacko, love it.

I got a new toshiba 1gb SD card, works fine on pc and the zaurus.

3 days later, the zaurus keeps hanging on me, a reflash didnt work.

I plugged out the sdcard and it worked ! (grrr), plugging it in my pc detects as "no card detected"

So its busted, going for a 1-1 replacement later.

Just wonder, has anyone managed to kill a SD card before ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=61558\"][{POST_SNAPBACK}][/a][/div]

15
Singapore/Malaysia / Where to buy the Zaurus C series in Singapore?
« on: January 18, 2005, 11:29:04 am »
Quote
know anyone in singapore who is willing to part their beloved c760 or c860? love to deal.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=20780\"][{POST_SNAPBACK}][/a][/div]

want a c700

less then 1 month old.

Pages: [1] 2