Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mullin

Pages: [1] 2 3
1
For Sale / Wanted / Sell Zaurus C3100 And Extra
« on: September 29, 2008, 12:17:26 pm »
sell the following together
1. Zaurus C3100 (90% new)
2. Asus SpaceLink Wireless LAN CF Card WL-110
3. Anycom Bluetooth CF Card
4. Audiovox GPRS card
5. Transcend 4GB CF Card
6. Toshiba 2GB SD Card
7. A leather bag

please pm to give an offer and i will pay for the shipping.

2
Python / Jython On Zaurus
« on: July 04, 2007, 04:39:07 am »
hi, can you share your modified coding?

need debian or not? just using x/qt only.

3
Security and Networking / How To Do A Pair Up With Mobile Phone
« on: February 25, 2007, 10:07:46 pm »
How do the pair up FROM zaurus?? I can only do it from mobile phone, nokia 9300. I think I miss this part so that I got the following error:

My bluetooth dial-up network shows the following:
1. initializing the modem
2. connecting
3. connecting 0:00:00 [when click "I" icon, i can see the DNS server ip, but ip is 0:0:0:]
4. network disconnect

any ideas? i'm using Anycom CF BT card and the here's my Bluetooth dial-up setting
username:
password:
Phone: *99# or *99***1#
BT device: /dev/rfcomm0
Init string: ATZ
Speed: 115200
Hardware flow control: checked
Flow control: 30sec
Auto-detect routing: checked
Auto-detect name server: checked

abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (ATZ^M)
expect (OK)
ATZ^M^M
OK
-- got it

send (ATDT*99***1#^M)
expect (CONNECT)
^M
ATDT*99***1#^M^M
CONNECT
-- got it

Serial connection established.
using channel 8
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x93283a54> <pcomp> <accomp>]
Timeout 0x20084bc:0x203b440 in 3 seconds.
rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
lcp_reqci: returning CONFNAK.
sent [LCP ConfNak id=0x0 <auth chap MD5>]
rcvd [LCP ConfRej id=0x1 <magic 0x93283a54> <pcomp> <accomp>]
Untimeout 0x20084bc:0x203b440.
sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
Timeout 0x20084bc:0x203b440 in 3 seconds.
rcvd [LCP ConfReq id=0x1 <auth chap MD5> <mru 1500> <asyncmap 0xa0000>]
lcp_reqci: returning CONFACK.
sent [LCP ConfAck id=0x1 <auth chap MD5> <mru 1500> <asyncmap 0xa0000>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
Untimeout 0x20084bc:0x203b440.
rcvd [CHAP Challenge id=0x0 <4953414c4956454e524f434b494e3455>, name = "Elvis"]
ChapReceiveChallenge: using 'BLUETOOTH1136121411' as remote name
sent [CHAP Response id=0x0 <f70dcb8d4fd1d650dd9948ad3304bdcf>, name = "zaurus"]
Timeout 0x200f698:0x203b710 in 3 seconds.
rcvd [CHAP Success id=0x0 ""]
Untimeout 0x200f698:0x203b710.
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Timeout 0x20084bc:0x203b6a0 in 3 seconds.
sent [CCP ConfReq id=0x1 <bsd v1 15>]
Timeout 0x20084bc:0x203b7a0 in 3 seconds.
rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
ipcp: returning Configure-ACK
sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 07 15 03 2f]
Untimeout 0x20084bc:0x203b7a0.
rcvd [LCP TermReq id=0x2]
LCP terminated by peer
Untimeout 0x20084bc:0x203b6a0.
CCP: Down event in state 1!
Timeout 0x20084bc:0x203b440 in 3 seconds.
sent [LCP TermAck id=0x2]
Connection terminated.

4
C1000/3x00 General discussions / Bt Dial-up Problem - Status: Network Disconnect
« on: February 25, 2007, 06:49:36 pm »
changed but still got the same error. here's the /tmp/bluetooth-pppd-log

abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (ATZ^M)
expect (OK)
ATZ^M^M
OK
 -- got it

send (ATDT*99***1#^M)
expect (CONNECT)
^M
ATDT*99***1#^M^M
CONNECT
 -- got it

Serial connection established.
using channel 8
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x93283a54> <pcomp> <accomp>]
Timeout 0x20084bc:0x203b440 in 3 seconds.
rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
lcp_reqci: returning CONFNAK.
sent [LCP ConfNak id=0x0 <auth chap MD5>]
rcvd [LCP ConfRej id=0x1 <magic 0x93283a54> <pcomp> <accomp>]
Untimeout 0x20084bc:0x203b440.
sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
Timeout 0x20084bc:0x203b440 in 3 seconds.
rcvd [LCP ConfReq id=0x1 <auth chap MD5> <mru 1500> <asyncmap 0xa0000>]
lcp_reqci: returning CONFACK.
sent [LCP ConfAck id=0x1 <auth chap MD5> <mru 1500> <asyncmap 0xa0000>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
Untimeout 0x20084bc:0x203b440.
rcvd [CHAP Challenge id=0x0 <4953414c4956454e524f434b494e3455>, name = "Elvis"]
ChapReceiveChallenge: using 'BLUETOOTH1136121411' as remote name
sent [CHAP Response id=0x0 <f70dcb8d4fd1d650dd9948ad3304bdcf>, name = "zaurus"]
Timeout 0x200f698:0x203b710 in 3 seconds.
rcvd [CHAP Success id=0x0 ""]
Untimeout 0x200f698:0x203b710.
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Timeout 0x20084bc:0x203b6a0 in 3 seconds.
sent [CCP ConfReq id=0x1 <bsd v1 15>]
Timeout 0x20084bc:0x203b7a0 in 3 seconds.
rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
ipcp: returning Configure-ACK
sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 07 15 03 2f]
Untimeout 0x20084bc:0x203b7a0.
rcvd [LCP TermReq id=0x2]
LCP terminated by peer
Untimeout 0x20084bc:0x203b6a0.
CCP: Down event in state 1!
Timeout 0x20084bc:0x203b440 in 3 seconds.
sent [LCP TermAck id=0x2]
Connection terminated.

any ideas?

do i need to pair up from zaurus? i just did the pair up from mobile phone, nokia 9300 only.


Quote
Try setting your phone number to *99***1# . That instructs the phone to use its other GPRS connection details; normally by using *99#, you would have to pass those details yourself through the init string.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155223\"][{POST_SNAPBACK}][/a][/div]

5
C1000/3x00 General discussions / Bt Dial-up Problem - Status: Network Disconnect
« on: February 25, 2007, 04:10:05 am »
After playing some time with c3100 and sharprom. My bluetooth dial-up network shows the following:
1. initializing the modem
2. connecting
3. connecting 0:00:00 [when click "I" icon, i can see the DNS server ip, but ip is 0:0:0:]
4. network disconnect

any ideas? i'm using Anycom CF BT card and the here's my Bluetooth dial-up setting
username:
password:
Phone: *99#
BT device: /dev/rfcomm0
Init string: ATZ
Speed: 115200
Hardware flow control: checked
Flow control: 30sec
Auto-detect routing: checked
Auto-detect name server: checked

6
Zaurus - pdaXrom / What Is The Max. Size Of Cf And Sd Under Pdaxrom
« on: January 18, 2007, 11:31:17 pm »
then, which combination supports the max. memory card.

thanks!

Quote
Quote
Just wonder what's the max. size of CF and SD card supported by pdaXrom on C1000/C3200? e.g. 4GB SD and 8GB CF.

I just know that 2GB SD and 4GB CF should be working fine.

Thanks a lot!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=151602\"][{POST_SNAPBACK}][/a][/div]

It depends on the version of pdaXrom you are talking about, ie 2.4.x kernel based which are anything up to beta3, or 2.6.x kernel based which are beta4 and later, as well as that it also depends on your Zaurus model.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=151605\"][{POST_SNAPBACK}][/a][/div]

7
Zaurus - pdaXrom / What Is The Max. Size Of Cf And Sd Under Pdaxrom
« on: January 18, 2007, 10:38:57 pm »
Just wonder what's the max. size of CF and SD card supported by pdaXrom on C1000/C3200? e.g. 4GB SD and 8GB CF.

I just know that 2GB SD and 4GB CF should be working fine.

Thanks a lot!

8
Software / Realplayer Or 3gp Player
« on: September 04, 2006, 10:15:08 pm »
Does Zaurus support Realplayer or any 3gp player

9
Software / Does It Support Skype?
« on: September 01, 2006, 05:39:39 am »
as subject?

10
Personal Java/Jeode/J2ME Personal Profile / Does The Jre On Zarusu Support Chinese?
« on: July 22, 2006, 08:12:38 am »
I expect the controls e.g. textbox, label supporting chinese, not just the definition at font.properties?

Anyone tried?

11
General Discussion / Does Zaurus Support Dual Sd Card (memory And Wirel
« on: July 21, 2006, 04:54:33 am »
If yes, which model and rom?

Thanks!

12
C1000/3x00 General discussions / Does C1000 Support Usb Wireless Adapter?
« on: July 21, 2006, 04:51:37 am »
I got a Linksys USB Wireless adapter? Does it work on C1000?

Which ROM are being tested successfully?

thanks!

13
General Discussion / Which Rom Should I Use If Want To Write Ui Program
« on: July 20, 2006, 08:27:04 am »
as subject - want to write UI applications on zaurus

please comment.

14
Zaurus - pdaXrom / Guitar Tab Viewer
« on: July 19, 2006, 07:01:14 am »
1. can it display only the chords and words or not
2. which programming language are you using, especially UI controls? and what's the running environment, e.g. Sharp rom? OZ? padaxrom?
3. indeed, i'm interested to write something similar and search for some ideas, e.g using java, QT and so on.

cheers.
mulli

15
X/Qt / Can Compile Hydrogen On Zaurus
« on: July 18, 2006, 08:41:25 pm »
http://www.hydrogen-music.org/

or how can i know whether the software can be compiled on zaurus?

Pages: [1] 2 3