Messages

1

Sharp ROMs / Cacko Rom 1.23 Is Released

« on: November 23, 2005, 09:24:30 pm »

I've tried the new configuration and I got the same result.  I thought I would try deleting the entry completely and rebooting to see if I got not recognised and I got the same result even though the card wasn't mentioned.

I thought what the hell and reinstalled the ROM, plugged in the card and hey presto it wasn't recognised, I tried updating the config file with both configs and this time nothing it just wasn't recognised, I am at a loss, I don't think I have done anything differently?  Are there any libs I should install?  The config files are definately updating with word as I checked the results.  Please help I am desparate as I can only get online by plugging into the LAN with my Buffalo card.  If you cann't solve the problem which card should I buy that will work in CACKO with kismet, Kphone, and Gaim?

2

Sharp ROMs / Cacko Rom 1.23 Is Released

« on: November 22, 2005, 08:59:09 pm »

OK I was being a plonker I have gone back to my old way of editing the config files: copy the config to an SD card and then edit it on my Laptop using MS Word then copy back again.

I have made the changes you suggest and now when I plug the Planex GW-CF11H it recognises it as follows:

DemarcTech Relia-Wave 180mW 802.11b WLAN Card

It will not connect in the network area as a wireless card or as a WLAN card which is what it thinks it is - what next I feel like we are making progress.  Also what about the SanDisk?

Many Thanks Again for your time - will definately make a donation when it's working

3

Sharp ROMs / Cacko Rom 1.23 Is Released

« on: November 22, 2005, 04:18:35 pm »

Maslovsky,

I have made a couple of minor changes to the following, it is now correct.  This probably sounds stupid but how do I edit the config file?  I can not open it with HancomWord, is there a console prog I use?

PLANEX
Socket 0:
product info: "PLANEX COMMUNICATIONS INC.", PLANEX GW-CF11H Wireless CF Card
", ""
manfid: 0xd601, 0x0005
function: 6 (network)
Socket 1:
no product info available

SANDISK
Socket 0:
product info: "SanDisk", ConnectPlus"
manfid: 0xd601, 0x0101
function: 6 (network)
Socket 1:
no product info available

Thank you again

4

Sharp ROMs / Cacko Rom 1.23 Is Released

« on: November 21, 2005, 06:51:31 pm »

Thank you Speculatrix,

I am calming down, you know the senario, it's a new toy and I want it to work!!

Here is the info that I get for the two cards:

PLANEX
Socket 0:
product info: "PLANEX COMMUNICATIONS INC.", PLANEX GW-CF11H Wireless CF Card",""
manfid: 0xd601, 0x0005
function: 6 (network)
Socket 1:
no product info available

Socket 0:
3.3V 16-bit PC Card
function 0: [ready]
Socket 1:
no card


SANDISK
Socket 0:
product info: "SANDISK", ConnectPlus"
manfid: 0xd601, 0x0101
function: 6 (network)
Socket 1:
no product info available

Socket 0:
3.3V 16-bit PC Card
function 0: [ready]
function 1: [ready], [bat dead], [bat low]
Socket 1:
no card


I hope this helps and I hope you can help

Many Thanks in advance

5

Sharp ROMs / Cacko Rom 1.23 Is Released

« on: November 21, 2005, 12:10:42 am »

I have been using the original sharp ROM and decided to try Cacko 1.23 it's all loaded up and looking very nice on my C1000 probleem is it doesn't recognise my wifi cards: SanDisk Connect Plus and Planex GW-CF11H.  The sharp ROM never saw the SanDisk but the Planex worked no problem.  I will willing donate money to this project if someone can get me running all I want is: Kismet, Kphone and at least one of the cards working and possibly Gaim.

If it is not possible perhaps I should use another ROM?

Please help!!!!!!!!!!!!!!!!!!!!!!!!!!

6

C1000/3x00 General discussions / Planex Gw-cf11h Working With Kismet

« on: November 14, 2005, 11:45:15 pm »

I'm having no luck at all - it will not even connect to the kismet_server.  It's time to buy the pretec card does it work?  and will this be an out of the box solution?

7

C1000/3x00 General discussions / Planex Gw-cf11h Working With Kismet

« on: November 14, 2005, 12:35:59 am »

Still no luck Kismet cann't connect to the server and Wellenreiter says it can't open packet capture any help would be much appreciated as getting sniffing working is paramount for me!

8

C1000/3x00 General discussions / Planex Gw-cf11h Working With Kismet

« on: November 13, 2005, 06:00:17 pm »

DoTheDog,

Thanks for the reply I have rebooted and it seems to connect to the adhoc server all the time now.  I started the kismet server as suggested but when I ran Kismet it still didn't connect do you run kismet from the terminal?  and if so what is the command line you use? ie kismet?

havn't tried loading Wellenreiter I will give it a go does anyone know anything about Discoverer?

9

C1000/3x00 General discussions / Planex Gw-cf11h Working With Kismet

« on: November 10, 2005, 09:19:30 pm »

Has anyone managed to get this card working with Kismet/Sharp ROM 1.01.  The problem seems to be connecting to the "dummy server"  I have a horrible feeling that this card isn't going to sniff?  Any help would be really appreciated as this is the second card I have bought and it ain't doing what I want - plus I am quickly running out of money!

10

Security and Networking / Problem With Wifi - Help Needed :)

« on: November 07, 2005, 12:28:09 am »

What patch did you use?  As I am having the same problem with the same setup, well not quite the card light comes on I think it is recognised but it doesn't give me the option to connect to my Netgear WGR614.  Perhaps it is not compatible?

11

C1000/3x00 Hardware / Usb Camera On C1000

« on: November 03, 2005, 03:51:36 pm »

If you search for "USB camera" or "USB webcam" you will find pretty much all there is in this forum.  As far as I can gather it is posssible depending on your ROM and I believe the Logitech camera will work out of the box but cann't remember with which ROM.

I am personally very new to all this so I will probably wait until there are a few IPKs for my sharp ROM rather than kill my SL-C1000 by rebuilding the K - unless someone has a really simple howto that is?

12

5x00 General discussions / Mp3 Downloads

« on: October 31, 2005, 06:34:06 pm »

Does anyone know of a Limewire, Grokster type application that will run on the SL-C1000?

13

C1000/3x00 Hardware / Sandisk Connect Plus

« on: October 20, 2005, 11:02:08 pm »

OK I have worked out that I need the prism3 drivers that have been packaged for the Sharp ROM anyone know where to get these?

14

C1000/3x00 Hardware / Sandisk Connect Plus

« on: October 19, 2005, 08:00:45 pm »

Any updates on the driver situation as I have the card and cann't seem to get it going tried to use the Prism3 drivers but the .ipk isn't recognised?

15

General Discussion / Buy Zaurus In Japan.

« on: October 13, 2005, 07:05:01 pm »

My wife has just returned from Japan with my new SL-C1000 she got it from sofmap not sure of the address in Tokyo but check www.sofmap.com.  she picked it up for 36600 YEN.  They were very helpful and she said they had a massive collection of used units.