Messages

1

Sharp ROMs / WLAN

« on: November 17, 2004, 06:24:00 pm »

Hey All!
After making a rough map of the major APs in my area, I've come up with some questions I can't quite find the answer to.

1) With Kismet, I can see more than one network; where do I choose which one to connect to? It always connects to the one where you need to pay..
2) Is there any way to get by the networks where you need to pay, or is that getting into WEP?

I'm runnig a SL-5600, with Zynergy ROM (basically the same as the original Sharp), and I use Kismet to sniff. I also installed Wellenreiter and Discoverer, but they both keep asking me to restart them in root mode, even after I've set "start as root" in the menu in Qt..
I have an Ambicom card, with a Prism 2.5 chipset.
Yack

2

Hungary / Welcome to the ALL NEW HUNGARY ZUG!!

« on: March 14, 2004, 07:37:33 pm »

Actually, no. I walked into the Sharp store across from Westend in Budapest, and they said they tried the 5000d in Hungary, but the loss was way too great; allegedly, it they thought it would go like candy but no they only sold a few, and they had to send whole shipments back. According to some sources, there were even some giveaways..

3

Windows Issues / OZ with Outlook

« on: March 13, 2004, 09:51:11 am »

Does anyone know how to sync OZ with Outlook? Any advice on any version of these two would be appreciated..
Thanks!

4

Angstrom & OpenZaurus / OZ 3.3.4 Sync w/ Outlook

« on: March 13, 2004, 09:37:31 am »

Does anyone have any Idea on how to sync OZ to Outlook? I\'ve found that the OZ backup is incompatible with the Sharp backup, and I need some way to back them up..
Thanks in advance,
Yack

5

Angstrom & OpenZaurus / 2.4.6-rmk1-np2-embedix-2

« on: February 22, 2004, 09:17:43 am »

When I try to install SSH server on my OZ, I get (among many others) this message:

Cannot satisfy the following dependencies for ssh-server:
  packet-modules (=2.4.6-rmk1-np2-embedix-2) packet-modules (=2.4.6-rmk1-np2-embedix-2) (and it goes on to repeat it about 13 times)

This has happened with alot of other packages, and I can barely install anything because of it. Does anyone have any idea of how I could fix this problem?
Thanks,
Yack

-------------------
SL-5600, OZ 3.3.4, Socket CF LAN, 2x Kingston 256 MB CF

6

Angstrom & OpenZaurus / openzaurs 3.3.5 stable for 5600.

« on: January 21, 2004, 12:48:41 pm »

I installed 3.3.4, works like a charm. I couldn\'t tell you where to get it, hove to ask Mickey that..

7

Angstrom & OpenZaurus / 5600 - OZ 3.3.4

« on: January 18, 2004, 05:52:33 pm »

I\'ve been using OZ for some time now (I love it), and since I know that I was searching for a long time for a OZ version that works well with my 5600 I\'d like to share it:
It\'s version 3.3.4. I\'ve never heard of it on any forum, or, in fact, on the OZ site, but it\'s what I have, and it works like a beaut. A few problems though; alot of packages don\'t install, not sure why, konsole ipkg-ing doesn\'t work out, and any time I enter \"aqpkg\" it starts up the gui..
Oh, and I can\'t seem to find a media-player.
Yack

-------------------------------
SL-5600, 2*Kingston 256CF, Socket Ethernet CF, OZ 3.3.4

8

Hungary / Welcome to the ALL NEW HUNGARY ZUG!!

« on: December 25, 2003, 05:47:01 pm »

UDV!
I know you\'re out there in Budapest, teeming with Zaurii, and loving them. Let\'s get the Z party started, \"magyar\" style!!
Yack

(ok, maybe I\'m a bit too enthisiastic..  :wink: )

9

Software / QPlot Parse Error

« on: November 27, 2003, 10:43:59 am »

I recently installed QPlot, and it worked great for a while, I absolutely loved it, but now every time I start it up, it says

(standard_in)6:parse eroor

and goes all the way to 99, leaving out a few numbers. What could the problem be?
Oh, yes it also says \"please use QPlot inputethod\" on the bottom of the screen, even when I am using the QPlot input method.. any ideas?
Yack
-----
Z-SL5600, original ROM, socket CF Ethernet, Micro Innovations Infra-Red keyboard

10

Software / How do I get back the Sharp ROM?

« on: November 23, 2003, 07:29:17 am »

Thanks for the help, it worked like a charm :-DD
Yack

11

Software / How do I get back the Sharp ROM?

« on: November 22, 2003, 12:52:28 pm »

After installing a whole lot of packages, including a lot of opie-packages, my zaurus boots into some other view; I expect its opie. But I can\'t really do anything.. All I see is 4 files, the menu is completly empty. How can I get my old graphics/view/whatever I replaced back?

Thanks,
Yack

12

Accessories / Micro Innovations Wireless keyboard setup

« on: November 22, 2003, 07:32:32 am »

I found a great peice of software, it rotates the screen around so I can use it fine..

13

Accessories / Micro Innovations Wireless keyboard setup

« on: November 21, 2003, 12:49:52 pm »

I just purchased a Micro Innovations Wireless keyboard for my Zaurus-SL5600, but there\'s a problem; I don\'t know how to physically set it up to work. I can type with it, and the Z recognizes it fine, but the problem is that the Z has its infra-port on its side, so I can\'t use the stand (The keyboard has it just above the \"w\" key), and I don\'t know how I could rotate the screen.. Does anyone have any ideas?
Yack

14

Site Suggestions, Requests, and Updates / Request new ZUG forums here!

« on: November 12, 2003, 12:18:31 pm »

I\'m all for a Hungarian ZUG.. Alot of programmers and IT peeps here, and I\'m absolutly sure the Zaurus will be (if it isn\'t yet) very popular..
Yack

Sorry, I forgot to log in... that was me...
Yack