Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - iits

Pages: [1] 2
2
Zaurus - pdaXrom / Wpa-supplicant Configuration
« on: December 07, 2006, 04:51:32 am »
Quote
this is probabaly a crazy question as I don't use WPA (yet) but is it possible to connect to networks that you don't have all the details of (ESSID/Freq etc) but you know the Key?

For example I go to see my family and want to connect but don't want my dad to rummage around trying to find out all the details - we have the Key, but would like to search for the access point , like in wifi-radar
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148361\"][{POST_SNAPBACK}][/a][/div]

You can scan for SSID (if it not hidden) and the freq should be found automaticly

4
Zaurus - pdaXrom / Kernel 2.4
« on: July 19, 2006, 10:44:32 am »
Hi,
I use Beta4 but my GPS-Card doesn't.
Is it possible to switch to Kernel 2.4 without reflash the rest of the OS?

5
Zaurus - pdaXrom / Billionton Bluetooth Card Doesn't Work With Beta4
« on: July 19, 2006, 08:00:51 am »
I have the same Problem with my CF-GPS Card (haicom 303)

modprobe serial_cs says:

WARNING: Error inserting 8250 (PATH to 8250.ko): Device or resource busy
FATAL: Error inseritng serial_cs (PATH to serial_cs.ko):  Unknown symbol in module, or unknown parameter (see dmesg)

dmesg says the same as Vitel

Anything I can do to fix it?

6
Zaurus - pdaXrom / Keymap For Ubs-keyboard
« on: May 03, 2006, 03:33:21 pm »
Quote
Look here
https://www.oesf.org/forums/index.php?showtopic=18180
and
https://www.oesf.org/forums/index.php?showtopic=17122
[div align=\"right\"][a href=\"index.php?act=findpost&pid=125447\"][{POST_SNAPBACK}][/a][/div]

it works fine with the .xinitrc file, but then i need to restart the x-server every time i whant to use the keyboard.
I know what I have to write into the script but I don't know where to put the script and how to configure hotplug, that it run the script when plug in the keyboard

7
Zaurus - pdaXrom / Keymap For Ubs-keyboard
« on: May 02, 2006, 03:34:14 pm »
I try to write a usb-hotplug script that run just "xmodmap /etc/X11/kb/german-usb.map" when I plug in my USB-Keyb. But it don't work because I don't know how exactly the hotplug system works.
Can anybody give me a tip how to write this script?

Quote
Hi,
I bought a USB-Keyboard and I would like to use the german keymap on it. So I need a different Keymap on the internal Keyb than on the usb-keyb. Is this possible?

thx
[div align=\"right\"][a href=\"index.php?act=findpost&pid=125424\"][{POST_SNAPBACK}][/a][/div]

8
Zaurus - pdaXrom / Keymap For Ubs-keyboard
« on: May 02, 2006, 11:17:48 am »
Hi,
I bought a USB-Keyboard and I would like to use the german keymap on it. So I need a different Keymap on the internal Keyb than on the usb-keyb. Is this possible?

thx

9
Zaurus - pdaXrom / Keyring
« on: April 25, 2006, 09:27:35 am »
Quote
You meant mo-keyring?
I've tried also to start it, since mo-keyring did a good job on the 5600. It seems to have a problem with the libsqlite library ...
If I try to use libsqlite3 instead libsqlite it starts but complains afterwards with an undefined symbol sqlite_open
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

I used this one: [a href=\"http://www.scrypt.net/~celer/kweb/]http://www.scrypt.net/~celer/kweb/[/url]
I have to get my passwords from it and I don't know how :-(

10
Zaurus - pdaXrom / Gnumeric
« on: April 21, 2006, 03:39:39 pm »
Hi,
i installed Gnumeric but I when I start it I get a lot an error message that the configurations would not work properly.
When I start from the console it seems that some dirs are missing /apps/gnumeric; /desktop/gnome
have I to create them or are the somewhere else and I must to link them?

P.S. I installed everething to /home/user

11
Zaurus - pdaXrom / Keyring
« on: April 21, 2006, 02:49:56 pm »
Hi,
I used befor a 5600 with a sharp ROM and I stored my passwords in keyring. After killing :-( my nice 5600 I bought a C1000 and installed pdaxrom. How can I get my passwords from keyring? It doesn't run under pdaxrom, have I to install a different ROM first :-(

12
Zaurus - pdaXrom / Pocketop Ir Keyboard
« on: April 04, 2006, 01:55:55 pm »
Hi,
I just installed the beta2 pdaxrom am my C1000 and now I try to ust my Targus IR-Keyboard

XirKD works fine, but how can I use the german special letters like ÜÄÖ

zkbdd don't work.
I can start
zkbdd -t targus -d
and I see all the codes comes from the keyboard, but when I start without -d I can't type any letter

What did I wrong with zkbdd?

13
Zaurus - pdaXrom / Click On The Banner?
« on: April 01, 2006, 12:59:38 pm »
Hi,
does clicks on the banners on pdaxrom.org helps?

14
C1000/3x00 Hardware / Power Suply For C1000
« on: March 30, 2006, 03:11:25 am »
Hi,
can I use the 220-240V power suply from a 5500/5600 for a C1000?

15
For Sale / Wanted / Wtb Broken 5600
« on: March 29, 2006, 04:01:01 pm »
Hi,
I search a broken 5600. for example with broken screen or chassis.

Pages: [1] 2