Messages

16

C1000/3x00 General discussions / 3100 As My Single Mobile Device

« on: September 15, 2007, 11:05:53 am »

I have been using my zaurus for internet browsing years and years and had an unlimited net access for 24 dollars monthly.  I was using a siemens s56 for phone.  It recently died and now purchased a razr vxx.  Now I need a socketbluetooth and add a digital line to my phone for net access again.  my old bluetooth card landed in the grave.

17

C1000/3x00 General discussions / Need Help With Bluetooth Zaurus -> Phone Connectio

« on: September 06, 2007, 12:41:08 pm »

In case anybody besides me is following this thread or finds it in the future, after
MUCH futzing, I found my problem. I needed to put two \'s in front of my quotes
in the init string.

So the Init String is simply:
AT+cgdcont=1,\\"IP\\",\\"internet2.voicestream.com\\"

The ph. # is *99*
baud rate 115200
The three check boxes are checked (Hardware Flow Control, Auto-deteect routing,
Auto-detect name servers)

Incidentally, I found the file: /dev/shm/tmp/bluetooth-pppd-log a valuable debugging
aid, as was manually editing the file: /etc/ppp/peers/BLUETOOTH[your # here]

Thanks for inspring this success, at least, Cresho !

scot

ps- I also had to uninstall the recommended susp-resume packages since
they caused my Z to never suspend.  When needed, I re-start bluetooth
with /etc/rc.d/init.d/bluetooth restart

s
[div align=\"right\"][a href=\"index.php?act=findpost&pid=166739\"][{POST_SNAPBACK}][/a][/div]

not sure if you mean *99#.  Glad you solved it.

Anyway, i am responding because my friends' laptop is having issues again.  Same settings and same string and i even tried yours.  Doesnt work.  Now I'm trying different strings to see if its tmobile or what.  Maybee they blocked the port?  Ill call customer support.

18

Sharp ROMs / Youtube Videos

« on: September 01, 2007, 12:39:25 am »

in linux, i can use a software called videodownloader from screenlets repo's.  this downloads the content.  I can either convert it and view it on the zaurus.

19

General Discussion / Hooray~! I Installed Icewm On C1000

« on: August 25, 2007, 02:26:47 pm »

congrats!  Now if i can get a second zaurus.  I need the cacko or sharprom to run the commercial medical software i been using for a while.

20

C1000/3x00 General discussions / Need Help With Bluetooth Zaurus -> Phone Connectio

« on: August 20, 2007, 12:03:25 am »

have you tried replacing the atz with at+cgdcont=1,”IP”,”internet2.voicestream.com"

?  I am not sure if this would work but it's a good try though.  Ill dig up something from my past notes.  I see if i can find something.

21

C1000/3x00 General discussions / Need Help With Bluetooth Zaurus -> Phone Connectio

« on: August 19, 2007, 07:49:24 pm »

now before you do all this, i am curious.  which packages have you installed into your zaurus.  This is important.



make sure you have these files installed
susp-resume-bluez_0.9.1_arm.ipk
bluez-csr-serial_0.1_arm.ipk
bluez-zaurus_arm.ipk
qtopia-bluetoothnetworkapplet_1.0.1_arm.ipk
qtopia-pannetworkapplet_1.0.1_arm.ipk
susp-resume_0.9-3.1.ipk

just to make sure if you have the necessery files, i want you to open up your network in the settings, then do not use the wizard but use the dropdown menu and look for  bluetooth-ppp and select that.  then hit add and look for the modem tab and you will see the init string.  this is where you will need to add the tmobile string.  the digital data access number is *99# to dial and you use no username or password.



you can use zeditor as root or su and navigate your /etc/bluetooth/givepin to see your current pin number.  Secondly, you will need to find your rfcomm.conf file and configure the device  or the 'device address' of your phone. it is located as well in the /etc/bluetooth/   . just read it and change the default device address in the rfcomm.conf to the phone device address.  what this does it tells the bluetooth on the z to look for your phone and if it is paired, it will talk to each other.  you will first need to pair your zaurus with your phone.  pairing occurs when you first dial and your phone asks you a question.  the default pair number for the zaurus is 1234.  when your phone asks for pairing, it will need the 1234 number.

22

C1000/3x00 General discussions / Need Help With Bluetooth Zaurus -> Phone Connectio

« on: August 19, 2007, 03:52:41 am »

the T-mobile requires an initialization string which allows your zaurus to dial appropriately to T-mobile.

on a laptop with a blackberry, it is required to use the desktop manager software turned on for it to sync with the laptop at the same time you dial after to the tmobile site using the *99#.  now in the standart modem settings, you use this initializations string "very important"      


at+cgdcont=1,”IP”,”internet2.voicestream.com

this string is needed but will not work if not added.  There are various versions of this string and for some stupid reason, I had to call tmobile and ask them to help me with setting up the string cuz the one i gaved him was wrong by one quotation mark.  the above is missing something as I was typing this and as an example as I recall the correct one is this one.

at+cgdcont=1,”IP”,”internet2.voicestream.com"

so make sure you call tech support and ask for the correct string and add it to the z.  I know this cuz i finished setting up a blackberry on a laptop which took me 6 hours to do cuz not only was this string needed.  he also needed an updated desktop manager software and the latest blackberry os to prevent none connection.  Tmobile sucks.

you need to add the bluetooth the rfcom i think under bluetooth and edit that in zeditor and also adddevice address so it can look for it specifically.

If you don't know what I'm talking about, ill make it more clear since I'm a bit under the influence of alcohol at the moment.  I check oesf forums almost every day.

23

C1000/3x00 General discussions / Help With Cacko Rom Built-in Package Installer

« on: August 17, 2007, 01:10:21 am »

so how many times have you flashed your zaurus with the cacko rom 1.23?  I have noticed flashing it many times over (at most 2 times) i begin to see problems with "lock-ups"  What I did to correct this problem is to flash the sharprom and then flashback to the cacko rom.

Now If I wanted to reset cacko rom to the original state, i would just format the userpartition in the flash utility of the cacko 1.23.  This helps me avoid the problem of flashing sharprom and then back to cacko 1.23 (but only after a successful first time cacko 1.23 flash)

24

Off Topic forum / Cellular Broadband

« on: July 29, 2007, 09:56:42 pm »

my plan is so old, it was active before it became cingular @24.99 A MONTH DAta and it still works on my z

25

C1000/3x00 General discussions / Can't Install Programs On The Sd Card

« on: July 23, 2007, 12:58:43 pm »

i have the same issues.  install programs using terminal.

26

Off Topic forum / It's Not A Zaurus

« on: July 17, 2007, 08:20:04 am »

I wonder how this would stack up.  I need to lash out!  Every time I see something like this, It's like someone squeezing my nipples hard.  Why these geniuses can't figure things out is beyond me.  internet pda?  what is this?

http://www.moblin.org/

27

Security and Networking / My Bluetooth Just Died.

« on: July 08, 2007, 07:37:10 pm »

I am still running cacko 1.23 on my 3200.  Just recently, my bluetooth is identified by the zaurus system tab but in network, i cannot search for another bluetooth device.  i get a "no devices with DUN profile found."

Is it dead? and if it is, what flushed head bluetooth cf do you guys use or recommend?

28

Off Topic forum / Vista Is Watching You

« on: July 02, 2007, 11:51:28 am »

http://news.softpedia.com/news/Forget-abou...oft-58752.shtml

I finaly went over to ubuntu, kubuntu, xubuntu.  No more windows for me!  I am free from the crack addiction.

29

C1000/3x00 General discussions / Genesis Neogeo Snes Turbografx Nes Gameboy Emu

« on: June 29, 2007, 12:46:56 am »

follow the install guide.  appearantly, you did not install them in the order I suggested.  Also, everything needs to be installed internally.

30

C1000/3x00 General discussions / Genesis Neogeo Snes Turbografx Nes Gameboy Emu

« on: June 23, 2007, 11:35:12 am »

/home/etc/.zgnuboy/.zgnuboy.rc

edit the file with zeditor or your favorite text editor.  You may need to go into super user mode to edit this.  Post questions if you have any.

for nes, it is

/home/etc/.znester/.znester.rc

the list goes on similar like this.  Do not map the numbered keys because they change the special options of each rom.

snk4ever?  for neogeo, you will need to overclock your zaurus.  You will also need to increase your memory with the memory applet.  only the cacko rom 1.23 will do this.  neogeo games should be no bigger than 4-8mb.  anything over will lock up the zaurus for obvious reasons.

in cacko, you may expirience locking of the zaurus but it is due to the cacko rom under 3200.  the rom was not optimized to work with the new cpu.