← previous next →
Pages: [1]

Author Topic: Solved:touch Screen Too Sensitive  (Read 8224 times)

arzgi

  • Newbie
  • *
  • Posts: 47
    • View Profile
Solved:touch Screen Too Sensitive
« on: February 21, 2011, 05:36:12 am »
Installed debian-eabi followin 2or0's hints, just changed kernel to newer (2.6.26). Works, but touch screen calibration is so .....  

ts_calibrate opens, but the screen is so sensitive, that it is impossbile to do five separate clicks. Usually a stylus tap is interpreted as two or three.
My best effort after more than hour trying was 4 out of 5, frustrating.  And as at least two taps are on sameposition, ts_calibrate  announces determinant
is too small.

My hands ore not so bad    I have not ever before  had any issues completing screen calibration.

Is there a way to configure touch screen sensitivity?
« Last Edit: March 05, 2011, 06:10:53 am by arzgi »
Logged
SL-C3100 (x 2), Debian Squeeze Armel, D-Link DCF-660W, Planex GW-CF11x and AmbiCom WL54-CF cf-wlans ,
Buffalo LPC-CF-CLT cf-lan, Pretec cf-modem, Billionton CF GPS, a few CF- and SD-memory cards

arzgi

  • Newbie
  • *
  • Posts: 47
    • View Profile
Solved:touch Screen Too Sensitive
« Reply #1 on: March 05, 2011, 06:10:17 am »
Found it, just had to change TS_TSDEVICE to event2, was event1  
Logged
SL-C3100 (x 2), Debian Squeeze Armel, D-Link DCF-660W, Planex GW-CF11x and AmbiCom WL54-CF cf-wlans ,
Buffalo LPC-CF-CLT cf-lan, Pretec cf-modem, Billionton CF GPS, a few CF- and SD-memory cards

boulevard

  • Newbie
  • *
  • Posts: 2
    • View Profile
Solved:touch Screen Too Sensitive
« Reply #2 on: May 08, 2011, 10:25:38 am »
Quote from: arzgi
Installed debian-eabi followin 2or0's hints, just changed kernel to newer (2.6.26). Works, but touch screen calibration is so .....  

ts_calibrate opens, but the screen is so sensitive, that it is impossbile to do five separate clicks. Usually a stylus tap is interpreted as two or three.
My best effort after more than hour trying was 4 out of 5, frustrating.  And as at least two taps are on sameposition, ts_calibrate  announces determinant
is too small.

My hands ore not so bad    I have not ever before  had any issues completing screen calibration.

Is there a way to configure touch screen sensitivity?

So,any hints about the newer kernel(2.6.26)?
where can I get the newer kernel?
Thank you very much cuz I'm stuck on the old kernel(2.6.24) and cannot upgrade udev package to a newer version.
Logged

arzgi

  • Newbie
  • *
  • Posts: 47
    • View Profile
Solved:touch Screen Too Sensitive
« Reply #3 on: May 15, 2011, 08:36:43 am »
Quote from: boulevard
So,any hints about the newer kernel(2.6.26)?
where can I get the newer kernel?
Thank you very much cuz I'm stuck on the old kernel(2.6.24) and cannot upgrade udev package to a newer version.

http://www.penguin.cz/~utx/zaurus/feed/images/spitz/
Logged
SL-C3100 (x 2), Debian Squeeze Armel, D-Link DCF-660W, Planex GW-CF11x and AmbiCom WL54-CF cf-wlans ,
Buffalo LPC-CF-CLT cf-lan, Pretec cf-modem, Billionton CF GPS, a few CF- and SD-memory cards

boulevard

  • Newbie
  • *
  • Posts: 2
    • View Profile
Solved:touch Screen Too Sensitive
« Reply #4 on: May 21, 2011, 11:49:25 pm »
Quote from: arzgi
Quote from: boulevard
So,any hints about the newer kernel(2.6.26)?
where can I get the newer kernel?
Thank you very much cuz I'm stuck on the old kernel(2.6.24) and cannot upgrade udev package to a newer version.

http://www.penguin.cz/~utx/zaurus/feed/images/spitz/


Thank you  very much!!!!
Logged
Pages: [1]
← previous next →