Hello,
I am having trouble with the Origo/Senao WIFI card and C860 bought from
www.shirtpocket.co.ukWhen I bought the card I was using the Sharp ROM, and everything was smelling of roses. I then proceeded to experiment with alternative ROMs. I first used Cacko 1.21, and the wireless worked. Then came pdaXrom, I could get the wireless to work with this aswell, up until I used kismet. I am not sure if there is any link there, but I seem to remember it was around that time.
Now with pdaXrom I can, with the orinoco module, configure the wireless settings but the ap mac address is always 44:44:44:44:44:44 or 00:00:00:00:00:00. I am completely puzzled.
I then put the Cacko 1.21 ROM back on and now, with the prism2_cs module, have no wireless extensions for the card. There is no problem with the recognision of the card, cardctl gives the correct info, the modules are loaded.
# dmesg
pxa_pcmcia(0)
init_module: prism2_cs.o 0.1.12-shp Loaded
init_module: dev_info is: prism2_cs
prism2_cs: index 0x01: VCC 3.3, irq 39, io 0xf6000000-0xf600003f
hfa384x_corereset: hfa384x_corereset not supported on pcmcia. Use driver services COR access function instead
ident: nic h/w: id=0x800c 1.0.0
ident: pri f/w: id=0x15 1.1.0
ident: sta f/w: id=0x1f 1.4.9
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: SN028051036x0a
# lsmod
Module Size Used by
prism2_cs 54576 0
p80211 9952 1 [prism2_cs]
pxa_bi 21440 0 (unused)
...
# iwconfig eth0
eth0 no wireless extensions
Any help would be nice,
Cheers
Hazza
