Author Topic: Zaurus Unit Converter (Read 3921 times)

ksignorini · « **on:** October 30, 2004, 04:23:04 pm »

Has anyone installed ZUC?

I can run it, but the units don't convert right and I can't reach the program's author.

Does anyone have any ideas?

This sounds silly, but this little app was a factor that drew me to the Zaurus.

Thanks,
Kent!

dougeeebear · « **Reply #1 on:** October 30, 2004, 04:34:44 pm »

I have ZUC installed, but haven't checked it out much.
What units are you trying to convert?

ksignorini · « **Reply #2 on:** October 30, 2004, 04:59:25 pm »

Well, even a simple 73 Deg F to Deg C doesn't work right.

73 = 23 but when I enter 73 Deg F, and press Go, both windows show -16.6666669!!!

Weird!

Could you try that and see what you get? Perhaps I have a bad download and could get you to send me your copy if it works.

btw: What hardware/OS are you running it on? Did you makecompat it? Which feed of oz-compat did you use?

Thanks,
Kent!

dougeeebear · « **Reply #3 on:** October 30, 2004, 05:40:35 pm »

OK, I enter 73 F, and I get 22.778 C.

I am running SL-5500 with Sharp Rom 3.13.

Here is a link to where I got my copy

http://www.killefiz.de/zaurus/showdetail.php?app=206

Hope this helps.

Doug

ksignorini · « **Reply #4 on:** October 31, 2004, 11:34:05 am »

Well, I reflashed Sharp ROM 2.38 to see if the problem was with OZ 3.5.1 and sure enough...

When I use Sharp, ZUC works fine and so does entering numbers and calculations in Hancom Sheet. In OpenZaurus 3.5.1, all the numbers are mixed up Hancom Sheet (I enter 777 in a cell and it shows me 14) and in ZUC, it's as I explained above.

Any OZ 3.5.1-ers out there know how to fix this?

Thanks,
Kent!

bluedevils · « **Reply #5 on:** October 31, 2004, 12:53:06 pm »

as an alternative, aren't there calculator programs that also convert?

dougeeebear · « **Reply #6 on:** October 31, 2004, 02:21:12 pm »

Quote

Well, I reflashed Sharp ROM 2.38 to see if the problem was with OZ 3.5.1 and sure enough...

When I use Sharp, ZUC works fine and so does entering numbers and calculations in Hancom Sheet. In OpenZaurus 3.5.1, all the numbers are mixed up Hancom Sheet (I enter 777 in a cell and it shows me 14) and in ZUC, it's as I explained above.

Just another reason I stick to standard Sharp Rom.. It's very stable, and everything works very well.

Doug

jdf · « **Reply #7 on:** October 31, 2004, 05:35:52 pm »

I made a unit converter as a way to learn how to program for the zaurus. I never got much feedback after it was initially made, and I have been away from the zaurus since then! I might be getting back into some programming this winter, I hope! Maybe I could improve it. I only tried on sharp ROM for 5500 and it was doing the calcs correctly:

You could try the results here:
http://www.delferro.net/zaurus/

Or look over the posts and help I had making it from this boards here:
https://www.oesf.org/forums/inde...wtopic=2505&hl=

And these discusions we had about setting up the developer environment:
https://www.oesf.org/forums/inde...wtopic=2045&hl=
https://www.oesf.org/forums/inde...owtopic=431&hl=

JDF

ksignorini · « **Reply #8 on:** October 31, 2004, 05:43:12 pm »

JDF,

The location does not seem to be working.

Thanks,
Kent!

jdf · « **Reply #9 on:** October 31, 2004, 10:15:20 pm »

Anyone else having problems with URL. It seems to work fine for me.

http://www.delferro.net/zaurus/

ksignorini · « **Reply #10 on:** October 31, 2004, 10:26:52 pm »

The link worked now...maybe server was on the blink earlier?

Anyway, I'll give it a go.

Thanks!
Kent!

ksignorini · « **Reply #11 on:** October 31, 2004, 10:39:16 pm »

Won't run.

This is what I get running it at the command line:

ucz: error while loading shared libraries: libuuid.so.1: cannot open shared object file: No such file or directory

Any ideas what this is all about? I tried running it before and after makecompat and I get the same result each time.

Thanks,
Kent!

News:

Author Topic: Zaurus Unit Converter (Read 3921 times)