Cacko Rom 1.22 Hotfix A Is Available!

[maslovsky]

Hotfix A package is released. It can be installed on both full and lite ROM versions and available for download here: http://cacko.oesf.org/downloads/rom/1.22/c...x_1.22a_arm.ipk

Important: The hotfix package has been updated again to fix the issue with Backup/Restore application! Please, download hotfix package again and reinstall it. Check ROM version after install, it should include 0103090205

 - Updated Polish keymap (hopefully)
 - Fixed entry for SMC card
 - Added entry for Corega WiFi card

Have more fun!

------------------

CACkO Zaurus Qtopia ROM 1.22a 0103090205 (SL-C7x0) "Lisa"
Mon Feb 09 01:03 MSD 2004

1.22a Release Notes:

Bluetooth:

 - Added support for Ambicom BT2000C CF Card
 - Added OPD (Obex Push Daemon) and obextool - this allows to send/recieve PIM data and files via bluetooth
 - Updated dialup and pan bluetooth network applets

Networking:

 - Updated configuration for the following network cards:
   
   - Linksys WCF11 v2.5
   - Linksys WCF-12
   - Prolink WL201/Wisgo NL-2511CF(ETSI)
   - Sony PEGA-WL100
   - D-Link DWL-650/660 CF Cards
   - SanDisk Wireless CF Card
   - Trendnet TEW-22CF
   - Zcomax XI-325H
   - BUFFALO WLI2-CF-S11
   
 - Added generation of missing RSA key for SSH v1
 - Updated support for Audiovox GPRS CF card

ROM:

 - Fixed the __udivsi3 undefined symbol problem with zsh, vim and some other applications
 - Created link libpcap 0.7.0 -> libpcap 0.8.3
 - Created link bzip2 -> bunzip2
     
Qtopia:

 - Fixed missing "?" in Deutsch leymap
 - Fixed problem wirh Polish keymap not being loaded by keyboard applet
 - Fixed missing unicode keyboard input method
 - Updated handwriting input method
 - Added missing screen shot sound

[wowo123]

Hi Maslovsky,
thank you for the update. Unfortunately my SMC EZ Connect Card (SMC2642W) now isn't recognized at all. When inserting the led goes hi and that's it. Without hotfix it is recognized as Zcomax and is running OK. Using the old hostap_cs.conf with the hotfix also doesn't fix it.

wowo

[Terry]

Can I install it in 1.22J?

[stupkid]

The hotfix should be applicable to all variations of the Cacko 1.22 ROM.

[edi800]

Qtopia:

 - Fixed problem wirh Polish keymap not being loaded by keyboard applet

[div align=\"right\"][a href=\"index.php?act=findpost&pid=65577\"][{POST_SNAPBACK}][/a][/div]

Can you please write how can I fix the problem with Polish keybard? Because unfortunately, after installing 1.22 Hotfix A, the Polish keymap does not work too :-(

Apart from that, the new ROM is great :-)

[maslovsky]

Qtopia:

 - Fixed problem wirh Polish keymap not being loaded by keyboard applet

[div align=\"right\"][a href=\"index.php?act=findpost&pid=65577\"][{POST_SNAPBACK}][/a][/div]

Can you please write how can I fix the problem with Polish keybard? Because unfortunately, after installing 1.22 Hotfix A, the Polish keymap does not work too :-(

Apart from that, the new ROM is great :-)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=65749\"][{POST_SNAPBACK}][/a][/div]

What exactly doesn't work?  I just checked - Polish keymap loads fine and I can switch between English and Polish. I cannot say if  keymap produces proper characters though...

[maslovsky]

Hi Maslovsky,
thank you for the update. Unfortunately my SMC EZ Connect Card (SMC2642W) now isn't recognized at all. When inserting the led goes hi and that's it. Without hotfix it is recognized as Zcomax and is running OK. Using the old hostap_cs.conf with the hotfix also doesn't fix it.

wowo
[div align=\"right\"][a href=\"index.php?act=findpost&pid=65680\"][{POST_SNAPBACK}][/a][/div]

OK, let's try again. What's the output of cardctl ident of your card? Did you restart pcmcia susbsystem (or rebooted your Z) after copyign old hostap config file?

[edi800]

What exactly doesn't work?  I just checked - Polish keymap loads fine and I can switch between English and Polish. I cannot say if  keymap produces proper characters though...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=65797\"][{POST_SNAPBACK}][/a][/div]

I think that there's something wrong with the keymap that was inside the ipk of Hotfix a.
There are spaces between the key codes in configuration options.
eg.  there is space (0x20) between 0x2014 and 0x118
[keyboard-fn]
0x2014 0x118 0x119 #q daje e z ogonkiem
0x2017 0x104 0x105 #a daje a z ogonkiem
0   0   0  

I see there are TABs (0x09) in other keymaps. And when I copy the English keymap and put the same Polish key codes in [keyboard-fn], but with TABs between them instead of spaces, then it works. Is the cyrillica applet 'sensitive' to spaces?

[maslovsky]

What exactly doesn't work?  I just checked - Polish keymap loads fine and I can switch between English and Polish. I cannot say if  keymap produces proper characters though...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=65797\"][{POST_SNAPBACK}][/a][/div]

I think that there's something wrong with the keymap that was inside the ipk of Hotfix a.
There are spaces between the key codes in configuration options.
eg.  there is space (0x20) between 0x2014 and 0x118
[keyboard-fn]
0x2014 0x118 0x119 #q daje e z ogonkiem
0x2017 0x104 0x105 #a daje a z ogonkiem
0   0   0  

I see there are TABs (0x09) in other keymaps. And when I copy the English keymap and put the same Polish key codes in [keyboard-fn], but with TABs between them instead of spaces, then it works. Is the cyrillica applet 'sensitive' to spaces?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=65818\"][{POST_SNAPBACK}][/a][/div]

OK, can you just attach a working copy of Polish keymap here, so that I can update the hotfix.

[ev1l]

You have the wrong title over the buglist  in the first post
I'm going to install it and take a look

[wowo123]

OK, let's try again. What's the output of cardctl ident of your card? Did you restart pcmcia susbsystem (or rebooted your Z) after copyign old hostap config file?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=65799\"][{POST_SNAPBACK}][/a][/div]

It says as it should:

Product info: " ", "SMC2642W 11 Mbps Wireless CF Card", ""
manfid: 0xd601, 0x0005
function : 6 (network)


And yes, I rebooted the Z after changing hostap_cs.conf.

[edi800]

OK, can you just attach a working copy of Polish keymap here, so that I can update the hotfix.
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

Of course, it's here:  [a href=\"http://www.edi800.org/other/polish]http://www.edi800.org/other/polish[/url]

[Terry]

I found a strange condition for my Prolink WL201, after installed hotfix A, it stiil ident it to Senao SL2011CD/SL2011CDPLUS, like before patching.  But anyway, it seems work properly.  

[maslovsky]

You have the wrong title over the buglist  in the first post
[div align=\"right\"][a href=\"index.php?act=findpost&pid=65828\"][{POST_SNAPBACK}][/a][/div]

Yeah, just two days passed and finaly somone has noticed that   thanks!

[maslovsky]

OK, let's try again. What's the output of cardctl ident of your card? Did you restart pcmcia susbsystem (or rebooted your Z) after copyign old hostap config file?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=65799\"][{POST_SNAPBACK}][/a][/div]

It says as it should:

Product info: " ", "SMC2642W 11 Mbps Wireless CF Card", ""
manfid: 0xd601, 0x0005
function : 6 (network)

[div align=\"right\"][a href=\"index.php?act=findpost&pid=65832\"][{POST_SNAPBACK}][/a][/div]

OK, I now see a typo in hotfix:

" ", "SMC2642W 11mMbps Wireless CF Card", ""


Edit hostap_cs.conf and enter space instead of m chcracter for your card's entry. Let me know if it helps.