Wow, that looks great! Do you have to disassemble the Z to start working on it? I only plan on doing the area around the screen and the arrow area.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=66616\"][{POST_SNAPBACK}][/a][/div]
Yep you have to take it to bits otherwise you wll damage the parts you don't want to sand, eg the screen and the water from the wet n dry sandpaper will kill your z.
wet n dry sandpaer is as it implies, is sandpaper that can be used either wet or dry.
When it is wet, it isn't as abrasive and doesn't produce dust.
Use the fine stuff, as the coarse stuff will put deep scratches in it and give you more work to do in the long run. It will take several hours to do it right, if you rush it it will look like crap.
If you only want to do a small area, than stick some tape over the bits you don't want to do or you will end up having to do the whole lot.
The hard bits are where there are grooves as it is difficult to remove the silver paint from them with sandpaper. I used a scalpel for those bits.
Peter
