← previous next →
Pages: [1] 2

Author Topic: Oz 3.5.3 On Boxer (c860)  (Read 5777 times)

gervin23

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • http://
Oz 3.5.3 On Boxer (c860)
« on: April 13, 2005, 07:56:46 pm »
immeditaly after post flash reboot, OZ hangs during the boot screen.

i performed the following steps:
1. mv updater.sh to /mnt/cf/updater.sh
2. mv opie-image-c7x0-20050411221036.rootfs.img to /mnt/cf/initrd.bin
3. mv zImage-c7x0-20050411221036.bin /mnt/cf/zImage.bin
4. reflash

the blue bar (which i assume is a progress bar) remains mostly blue with a sliver of red on left while cursor blinks in upper left corner.

any ideas?
Logged

Cwiiis

  • Jr. Member
  • **
  • Posts: 60
    • View Profile
Oz 3.5.3 On Boxer (c860)
« Reply #1 on: April 13, 2005, 08:37:16 pm »
Try without renaming the images, and if that doesn't work, use the updater from 3.5.2 (with renamed images)
Logged

Mickeyl

  • Hero Member
  • *****
  • Posts: 1495
    • View Profile
    • http://www.Vanille.de
Oz 3.5.3 On Boxer (c860)
« Reply #2 on: April 13, 2005, 08:38:23 pm »
Did you follow the INSTALL instructions? Which blue bar are you talking about? You are not trying to use this from diagnostics menu or are you? I recommend using the standard 'reboot while holding OK' menu.
Logged
Cheers,

Michael 'Mickey' Lauer | Embedded Linux Freelancer | www.Vanille-Media.de
Consider donating, if you like the software I contribute to.

gervin23

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • http://
Oz 3.5.3 On Boxer (c860)
« Reply #3 on: April 13, 2005, 08:43:30 pm »
Quote
Did you follow the INSTALL instructions? Which blue bar are you talking about? You are not trying to use this from diagnostics menu or are you? I recommend using the standard 'reboot while holding OK' menu.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=75038\"][{POST_SNAPBACK}][/a][/div]
yep, i followed the INSTALL instructions. the blue bar that appears just after the 'rebooting' message, the one with the girl picture. and yes, the reflash option i used was the OK button while hitting the on button.
Logged

gervin23

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • http://
Oz 3.5.3 On Boxer (c860)
« Reply #4 on: April 13, 2005, 09:07:53 pm »
Quote
Try without renaming the images, and if that doesn't work, use the updater from 3.5.2 (with renamed images)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=75037\"][{POST_SNAPBACK}][/a][/div]

hmm, tried both but unfortunately no go.

here's what i see during the flash:

screen 1:
***********************************
<sharp logo with japanese text just below it>
INIT: version 2.78 botting
modprobe: Can't locate module devinfo
INIT: entering runlevel: 5
***********************************
screen 2:
***********************************
--- Zaurus CF updater ---
MODEL:SL-C860
kernel

0%          100%
.......................
Sucess!
RO file system
Flash erasing...done

0%          100%
.......................
Rebooting
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
Rebooting the system....
***********************************
screen3:
***********************************
splash screen which has the picuture of the girl and "
  • OpenZaurus w/ Kernel 2.6
  • " to the right of it with the blue bar running the length of and just below the preceeding text.

***********************************

screen3 is where it hangs. i don't see any informative messages so i can't say where it froze.

hope this helps...
Logged

gervin23

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • http://
Oz 3.5.3 On Boxer (c860)
« Reply #5 on: April 13, 2005, 09:35:51 pm »
note, this is after using cacko rom which instructed me to repartition the root to 27. would this have anything to do with it?
Logged

lardman

  • Hero Member
  • *****
  • Posts: 4512
    • View Profile
    • http://people.bath.ac.uk/enpsgp/Zaurus/
Oz 3.5.3 On Boxer (c860)
« Reply #6 on: April 14, 2005, 05:16:05 am »
Quote
picuture of the girl and "
  • OpenZaurus w/ Kernel 2.6
  • " to the right of it
I think it's a dinosaur actually.

Quote
this is after using cacko rom which instructed me to repartition the root to 27. would this have anything to do with it?

Possibly, you could try returning it to the original state (which is a 50-50 split I think).

If you have a serial lead, I think info comes out on ttyS0 while the Z's booting, but I may well be wrong about that.


Si
Logged
C750 OZ3.5.4 (GPE, 2.6.x kernel)
SL5500 OZ3.5.4 (Opie)
Nokia 770
Serial GPS, WCF-12, Socket Ethernet & BT, Ratoc USB
WinXP, Mandriva

Mickeyl

  • Hero Member
  • *****
  • Posts: 1495
    • View Profile
    • http://www.Vanille.de
Oz 3.5.3 On Boxer (c860)
« Reply #7 on: April 14, 2005, 08:19:23 am »
OpenZaurus doesn't work on repartitioned ROMs and we have no plans to change that  atm.

I will add a big fat warning to the release notes now!
Logged
Cheers,

Michael 'Mickey' Lauer | Embedded Linux Freelancer | www.Vanille-Media.de
Consider donating, if you like the software I contribute to.

gervin23

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • http://
Oz 3.5.3 On Boxer (c860)
« Reply #8 on: April 14, 2005, 08:24:23 am »
Quote
Quote
picuture of the girl and "
  • OpenZaurus w/ Kernel 2.6
  • " to the right of it
I think it's a dinosaur actually.
that's a pretty looking dinosaur:
« Last Edit: April 15, 2005, 04:41:16 am by gervin23 »
Logged

lardman

  • Hero Member
  • *****
  • Posts: 4512
    • View Profile
    • http://people.bath.ac.uk/enpsgp/Zaurus/
Oz 3.5.3 On Boxer (c860)
« Reply #9 on: April 14, 2005, 09:16:06 am »
lol

Okay, so it's been changed since I tried it (or I just forgot to look).

My mistake


Si
Logged
C750 OZ3.5.4 (GPE, 2.6.x kernel)
SL5500 OZ3.5.4 (Opie)
Nokia 770
Serial GPS, WCF-12, Socket Ethernet & BT, Ratoc USB
WinXP, Mandriva

gervin23

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • http://
Oz 3.5.3 On Boxer (c860)
« Reply #10 on: April 14, 2005, 08:01:45 pm »
ok, so i'm about to repartition the root. i don't see any way through the service menu so i guess i'll have to use the cacko updater.sh. is setting it to 64 what it was to begin with?

EDIT: gosh, nevermind. cacko's updater had 50 as the default value. thanks.
« Last Edit: April 14, 2005, 08:05:43 pm by gervin23 »
Logged

gervin23

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • http://
Oz 3.5.3 On Boxer (c860)
« Reply #11 on: April 14, 2005, 08:10:53 pm »
yep, thanks lardman and Mickeyl. repartioning back to 50 did the trick.
Logged

gester

  • Newbie
  • *
  • Posts: 19
    • View Profile
    • http://
Oz 3.5.3 On Boxer (c860)
« Reply #12 on: April 21, 2005, 04:17:45 pm »
I am having the same problem, and I am doing a flash update from oz3.5.2 and have never repartiond my Z.  I've tried all the ideas in this thred about how to place the files on the flash card with no luck.

any body have any other ideas?

Gester
Logged

lardman

  • Hero Member
  • *****
  • Posts: 4512
    • View Profile
    • http://people.bath.ac.uk/enpsgp/Zaurus/
Oz 3.5.3 On Boxer (c860)
« Reply #13 on: April 21, 2005, 05:25:25 pm »
Quote
any body have any other ideas?

Have you checked the md5sums?


Si
Logged
C750 OZ3.5.4 (GPE, 2.6.x kernel)
SL5500 OZ3.5.4 (Opie)
Nokia 770
Serial GPS, WCF-12, Socket Ethernet & BT, Ratoc USB
WinXP, Mandriva

gester

  • Newbie
  • *
  • Posts: 19
    • View Profile
    • http://
Oz 3.5.3 On Boxer (c860)
« Reply #14 on: April 22, 2005, 05:40:37 pm »
ok I fixed this it was all do to a bad flash card, reformated that and things are fine.
thanks for the sugestion though.

Gester
Logged
Pages: [1] 2
← previous next →