Pmp Usb Host Adapter Cable In Ph

[barryg]

Good day!

Do you know of any local merchants retailing the
PMP USB Host Adapter Cable[0]?

I will be using it for my soon-to-arrive c3k, and
had a hard time finding one.  Usually it's the mini-b or
the 4 pin mini-b usb adapter most computer shop
display.

Salamat po.

Mabuhay! barryg
[0]
http://www.nexternal.com/iriver?Product=104
http://www.iriver.co.jp/estore/details.php?3,9,118

[Stubear]

I got mine from the iRiver store, after the electrical appliance store that I first asked to order the cable for me told me it would be faster to walk up the street to the iRiver store rather than waiting 2 weeks for them to order it.

From this I assume that any store that carries iRiver stock would be able to order it for you.

Stu

[Meanie]

I got mine from the iRiver store, after the electrical appliance store that I first asked to order the cable for me told me it would be faster to walk up the street to the iRiver store rather than waiting 2 weeks for them to order it.

From this I assume that any store that carries iRiver stock would be able to order it for you.

Stu
[div align=\"right\"][a href=\"index.php?act=findpost&pid=83374\"][{POST_SNAPBACK}][/a][/div]

It depends which country you are in. My local iRiver store didn't even know what a PMP was  and after telling them about their own products they doubled checked and told me they do not have any PMP stuff. I eventually found a place that had PMPs but they didn't sell any of its acessories.

Then I asked my friend in Tokyo and she said, easy, the shop down the road has it

[Stubear]

I got mine from the iRiver store, after the electrical appliance store that I first asked to order the cable for me told me it would be faster to walk up the street to the iRiver store rather than waiting 2 weeks for them to order it.

From this I assume that any store that carries iRiver stock would be able to order it for you.

Stu
[div align=\"right\"][a href=\"index.php?act=findpost&pid=83374\"][{POST_SNAPBACK}][/a][/div]

It depends which country you are in. My local iRiver store didn't even know what a PMP was  and after telling them about their own products they doubled checked and told me they do not have any PMP stuff. I eventually found a place that had PMPs but they didn't sell any of its acessories.

Then I asked my friend in Tokyo and she said, easy, the shop down the road has it
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88532\"][{POST_SNAPBACK}][/a][/div]

LOL, guess there are bonuses from living in the "Land of the Rising Yen" after all

Stu

[barryg]

Good day!

Apologies for the late update.

Did not find any at our local iriver resellers.  I had to order
one from iriver.co.jp

Here is my zaurus page[0], mostly dealing with OpenBSD and
cheap USB peripherals.

Mabuhay! barryg

[0]
http://web.kssp.upd.edu.ph/barryg/zaurus/

[TsingTao]

This host cable (which follows the USB On-The-Go [OTG] standard)


 "USB Female A to Mini A"

 is NOT easy to find locally.  And I suggest ya'll don't try to create one with adapters (I was unable to get it to work   ).

 But, in addition to iRiver, you can go here:

https://serialio.com//store/product_info.ph...82de18220188139


 And pick one up for $5.99 plus shipping (and tax inside CA)

 Mine should ship tommorow...

 Cheers!  

[Viking]

 
usb-dumb adapter works ...
you had to patch the kernel
and remove check for usb-host attached ...
Beware ... this overirdes  the clean detection
change file : usb-ohci-pxa27x.c

static int __init pxa27x_ohci_init(void)
{
        int ret;
    /* USB Cable Connected ? */
// chg   if(!(GPLR1 & GPIO_bit(USB_CONNECT_GPIO))) {
        // c.f. 3.6.2 Clock Enable Register
        CKEN &= ~CKEN11_USB;
        CKEN |=  CKEN10_USB;
#if defined(CONFIG_ARCH_SHARP_SL) && defined(CONFIG_APM_CPU_IDLE)
        lock_FCS(LOCK_FCS_USBH, 1);
#endif

        /* Init USB Port 2 Output Control Register */
        UP2OCR = 0x00;

        /* Host Port 2 Transceiver Output Enable */
        UP2OCR |= UP2OCR_HXS;
        UP2OCR |= UP2OCR_HXOE;

        /* D+ Pull Up SW1 ON */
        UP2OCR |= (UP2OCR_DPPDE|UP2OCR_DMPDE);
        /* Set GPIO Pin Hi to Unconnect Host */
        GPSR(USBD_VBUS_GPIO_HOST) = GPIO_bit(USBD_VBUS_GPIO_HOST);

//chg  } else {
//chg   return -1;
//chg    }


Viki ng