Author Topic: Hentges Install Guide (Read 4654 times)

Airwolf · « **on:** July 13, 2005, 06:32:32 am »

Does anyone have the installation guide for the Hentges ROM as i am struggling to get past the initial boot screen

thanks

CoreDump · « **Reply #1 on:** July 13, 2005, 07:03:50 am »

Quote

Does anyone have the installation guide for the Hentges ROM as i am struggling to get past the initial boot screen

thanks
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88140\"][{POST_SNAPBACK}][/a][/div]

The install guide link pointed to the Installation Guide on ooenzaurus.org.
I sort-of forgot to update it

What's your problem?

Airwolf · « **Reply #2 on:** July 13, 2005, 07:55:03 am »

hi CoreDump, i am returning to my 5500 after several months so i am possibly a bit rusty on a number of things.

After flashing i get a menu of 6 choices with every one of them giving me problems.
eg. if i select sungle user mode i get an error msg stating i am running the wrong kernel. Actually i just left it alone and it seems to be 'installing'

will report back

Airwolf · « **Reply #3 on:** July 13, 2005, 07:56:31 am »

spoke to soon. now asking for a maintenance password

Greg2 · « **Reply #4 on:** July 13, 2005, 08:21:52 am »

Quote

After flashing i get a menu of 6 choices with every one of them giving me problems.

Select [1] normal

Greg

Syrae · « **Reply #5 on:** July 13, 2005, 05:08:29 pm »

It's also possible to kill the initial kernel warning message if it bothers you. You can completely remove the file called /etc/init.d/checkversion, or just rename it to temporarily disable it.

Also, you can just hit your "ok" button to do the default boot of 1 when you get to that part of the bootup.

CoreDump · « **Reply #6 on:** July 14, 2005, 05:16:57 am »

Your kernel wasn't flashed if you get the warning. Please make sure you rename it to "zImage" before flashing.

To only flash the kernel (and not the ROM) just place zImage w/o initrd.bin on the CF card.

Re; altboot boot menu: The next release won't prompt you for a menu, you'll have to manually activate it during the boot.

opusofid · « **Reply #7 on:** July 14, 2005, 11:09:43 am »

Hello this may be a little off this topic but I can't get the intern.bin file to extract from the tar.gz files or am I mistaken and I just need to rename the file and that is really the intern.bin file. winzip or any other program says that the file is corupt. any idea/

Alan

CoreDump · « **Reply #8 on:** July 16, 2005, 02:45:50 am »

Quote

Hello this may be a little off this topic but I can't get the intern.bin file to extract from the tar.gz files or am I mistaken and I just need to rename the file and that is really the intern.bin file. winzip or any other program says that the file is corupt. any idea/

Alan
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88353\"][{POST_SNAPBACK}][/a][/div]

Sounds like your download was damaged. Please dowload again.

radioz · « **Reply #9 on:** July 24, 2005, 08:22:07 pm »

Do I need an updater.sh to install the Hentges rom?
If so, can I just use the one from OZ or do I need a different one?

I couldn't find one on the Hentges site.

radioz

CoreDump · « **Reply #10 on:** July 25, 2005, 02:25:03 am »

Quote

Do I need an updater.sh to install the Hentges rom?
If so, can I just use the one from OZ or do I need a different one?

I couldn't find one on the Hentges site.

radioz
[div align=\"right\"][a href=\"index.php?act=findpost&pid=89363\"][{POST_SNAPBACK}][/a][/div]

The updater.sh from OZ 3.5.3 should be fine.

News:

Author Topic: Hentges Install Guide (Read 4654 times)