Author Topic: X/qt And Debian Pocketworkstation  (Read 5351 times)

Ping

  • Newbie
  • *
  • Posts: 17
    • View Profile
    • http://
X/qt And Debian Pocketworkstation
« on: August 25, 2005, 03:25:21 am »
I have a big problem with Debian on the Zaurus

I have installed X/Qt and Debian PocketWorkstation from jumbo package.

The "apt-get update/install' command stop at 97% (when it read the packages) and freeze the Zaurus
Zaurus SL-C3100
ROM Cacko 1.23 full
Kernel IPv6 Ready (cross-compiled from source )
Wifi card Linksys WCF12

adf

  • Hero Member
  • *****
  • Posts: 2807
    • View Profile
    • http://
X/qt And Debian Pocketworkstation
« Reply #1 on: August 25, 2005, 03:47:40 am »
could it be a problem with space and tmp location?  free memory...are you using swap? I've had issues with debian if I didn't use swap, though not these problems, I think.
**3100 Zubuntu Jaunty,(working on Cacko dualboot), 16G A-Data internal CF, 4G SD, Ambicom WL-1100C Cf, linksys usb ethernet,  BelkinF8T020 BT card, Belkin F8U1500-E Ir kbd, mini targus usb mouse, rechargeble AC/DC powered USB hub, psp cables and battery extenders.

**6000l  Tetsuized Sharprom, installed on internal flash only 1G sd, 2G cf

Ping

  • Newbie
  • *
  • Posts: 17
    • View Profile
    • http://
X/qt And Debian Pocketworkstation
« Reply #2 on: August 25, 2005, 04:23:17 am »
Quote
could it be a problem with space and tmp location?  free memory...are you using swap? I've had issues with debian if I didn't use swap, though not these problems, I think.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=93173\"][{POST_SNAPBACK}][/a][/div]

yes I use swap and I have 1,5 Go allocated for the debchroot

I will retry this evening with more space alloated for swap
« Last Edit: August 25, 2005, 04:23:38 am by Ping »
Zaurus SL-C3100
ROM Cacko 1.23 full
Kernel IPv6 Ready (cross-compiled from source )
Wifi card Linksys WCF12

MONVMENTVM

  • Full Member
  • ***
  • Posts: 191
    • View Profile
X/qt And Debian Pocketworkstation
« Reply #3 on: August 26, 2005, 04:18:01 am »
i have the same problem now... when updating it freezes at 97%.
i also have a swap of 64MB and my pocketworkstation size is 1024MB.

the first time i installed debian (size of 512MB) it worked... but i wanted to test also kde on it so i installed debian again with a size of 1024MB. with apt-get install kde it downloaded most of the files but in the end apt-get said that some packages couldn't be found so i should do an apt-get update or --fix-missing (the first time i installed debian i have done apt-get update before installing... but now i have forgotten it.) anyway i tried to make a update and again at 97% the zaurus didnt react anymore.

Edit: the only difference between the first installation of debian and the second (beside of the bigger size) is that i used the newer install script. first time i used 0.3.7 and the second time i used 0.3.8 i think.
i'll test it onemore time to update... if it doesnt work i'll delete pocketworkstation and install it with the script version 0.3.7 again. i'll tell you more after i've done this.

Edit#2: ok... zaurus froze again after trying to update... i'll installing debian now again with script 0.3.7
« Last Edit: August 26, 2005, 04:33:22 am by MONVMENTVM »
Device: Zaurus C3100
OS: testing pda[span style=\'font-size:13pt;line-height:100%\']X[/span]rom beta4
Window Manager: Xfce4 + ROX Desktop and Filer
WLAN: D-Link DCF-660W
Memory: Kingston 512MB SD
Creative Wired Remote modified to work as CE-RH2

Ping

  • Newbie
  • *
  • Posts: 17
    • View Profile
    • http://
X/qt And Debian Pocketworkstation
« Reply #4 on: August 26, 2005, 04:32:34 am »
Quote
i have the same problem now... when updating it freezes at 97%.
i also have a swap of 64MB and my pocketworkstation size is 1024MB.

the first time i installed debian (size of 512MB) it worked... but i wanted to test also kde on it so i installed debian again with a size of 1024MB. with apt-get install kde it downloaded most of the files but in the end apt-get said that some packages couldn't be found so i should do an apt-get update or --fix-missing (the first time i installed debian i have done apt-get update before installing... but now i have forgotten it.) anyway i tried to make a update and again at 97% the zaurus didnt react anymore.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=93303\"][{POST_SNAPBACK}][/a][/div]

Ok, so I will test with 512 MB size !  I will not install OpenOffice... in any way I use only vim
Zaurus SL-C3100
ROM Cacko 1.23 full
Kernel IPv6 Ready (cross-compiled from source )
Wifi card Linksys WCF12

adf

  • Hero Member
  • *****
  • Posts: 2807
    • View Profile
    • http://
X/qt And Debian Pocketworkstation
« Reply #5 on: August 26, 2005, 04:59:11 am »
[I could be wrong about the problem--it happens a lot.

also do you do apt-get clean after installs and upgrades?  It cleans up the downloaded .debs
**3100 Zubuntu Jaunty,(working on Cacko dualboot), 16G A-Data internal CF, 4G SD, Ambicom WL-1100C Cf, linksys usb ethernet,  BelkinF8T020 BT card, Belkin F8U1500-E Ir kbd, mini targus usb mouse, rechargeble AC/DC powered USB hub, psp cables and battery extenders.

**6000l  Tetsuized Sharprom, installed on internal flash only 1G sd, 2G cf

Ping

  • Newbie
  • *
  • Posts: 17
    • View Profile
    • http://
X/qt And Debian Pocketworkstation
« Reply #6 on: August 26, 2005, 06:14:52 am »
Quote
[I could be wrong about the problem--it happens a lot.

also do you do apt-get clean after installs and upgrades?  It cleans up the downloaded .debs
[div align=\"right\"][a href=\"index.php?act=findpost&pid=93307\"][{POST_SNAPBACK}][/a][/div]

I will test but I don't think it will change something
Zaurus SL-C3100
ROM Cacko 1.23 full
Kernel IPv6 Ready (cross-compiled from source )
Wifi card Linksys WCF12

MONVMENTVM

  • Full Member
  • ***
  • Posts: 191
    • View Profile
X/qt And Debian Pocketworkstation
« Reply #7 on: August 26, 2005, 06:35:49 am »
ok i installed with script 0.3.7 but it doesnt work.... what i also saw is that i dont have openoffice anymore in the menu. and as i installed debian first i had... and later i installed the debian scripts 0.5. and i think after that the openoffice tab disappeared and i also could use apt-get (installed about 10 apps through apt-get but the space was too low for kde which i also wanted to test). i will deinstall the 0.5 debian script now and see what happens.
Device: Zaurus C3100
OS: testing pda[span style=\'font-size:13pt;line-height:100%\']X[/span]rom beta4
Window Manager: Xfce4 + ROX Desktop and Filer
WLAN: D-Link DCF-660W
Memory: Kingston 512MB SD
Creative Wired Remote modified to work as CE-RH2

MONVMENTVM

  • Full Member
  • ***
  • Posts: 191
    • View Profile
X/qt And Debian Pocketworkstation
« Reply #8 on: August 26, 2005, 07:41:39 am »
ok i have found the problem:

it is the debian script 0.5...

what you have to do:

deinstall all x/qt and debian files (also delete pocketworkstation located in /hdd3)... install everything again (but without debian scripts 0.5!!!)

then apt-get works again as it should.
« Last Edit: August 26, 2005, 07:42:36 am by MONVMENTVM »
Device: Zaurus C3100
OS: testing pda[span style=\'font-size:13pt;line-height:100%\']X[/span]rom beta4
Window Manager: Xfce4 + ROX Desktop and Filer
WLAN: D-Link DCF-660W
Memory: Kingston 512MB SD
Creative Wired Remote modified to work as CE-RH2

Ping

  • Newbie
  • *
  • Posts: 17
    • View Profile
    • http://
X/qt And Debian Pocketworkstation
« Reply #9 on: August 26, 2005, 02:15:43 pm »
Quote
ok i have found the problem:

it is the debian script 0.5...

what you have to do:

deinstall all x/qt and debian files (also delete pocketworkstation located in /hdd3)... install everything again (but without debian scripts 0.5!!!)

then apt-get works again as it should.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=93337\"][{POST_SNAPBACK}][/a][/div]

cool !
Zaurus SL-C3100
ROM Cacko 1.23 full
Kernel IPv6 Ready (cross-compiled from source )
Wifi card Linksys WCF12

Ping

  • Newbie
  • *
  • Posts: 17
    • View Profile
    • http://
X/qt And Debian Pocketworkstation
« Reply #10 on: August 27, 2005, 01:50:55 pm »
It works fine now! thank you !

Now I can surf on IPv6 websites with Firefox (before I used Konqueror but sometime it reboots the Zaurus...)
Zaurus SL-C3100
ROM Cacko 1.23 full
Kernel IPv6 Ready (cross-compiled from source )
Wifi card Linksys WCF12