Wellenreiter Available

[Cresho]

here you go. The tutorial i promised.

if you have problems, post it and if you have solutions, post it.

Let me know if it helps...ill check up on this in a bit.
------------------------------------------------------------------------------------------
install

libpcap0_0.7.2-20031220_arm.ipk
libopie1_1.1.0-20031220_arm.ipk
libopie2_1.8.2-20031220_arm.ipk
wellenreiter_1.0.2-sl-c7x0-6_arm.ipk

then go to applications or were it installed the icon on palmtop
hold icon, extra menu pops up and down and disable root

Once that is done create a network profile as follows:
______________________________________________________

_______
Account
Name: wellenreiter

Config
Non-Spec ESS-ID: "ANY" (unticked)
ESS-ID: any
Network Type: 802.11 Ad-Hoc

WEP
Key Type: Disabled

PPoE
Use PPoE Authentication (unticked)

WEB Auth
Use WEB Authentication (unticked)

TCP/IP
Obtain TCP/IP information Automatically

(unticked)
IP Address: 10.1.0.2
Subnet Mask: 255.0.0.0
Gateway: 10.1.0.1

DNS
Auto-detect name servers (unticked)
Primary DNS: 10.1.0.1
Secondary DNS:
Default domain: (leave empty)

Proxy
No proxy
______________________________________________________

_______

after all that mess, all you need to to from now on

is...
start wellenreiter and then connect to this network which is wellenreiter from the
network applet in the taskbar.  click on sniffer and hit start. You should
connect by then. If not, you just need to tweak it
according to your wifi card. To stop it, hit sniffer
and stop. Then you have a list of wifi spots.  create a network  mannually under network and you can log into it with the ess id that you gained.

problems.

1.  you can't join a network from wellenreiter for this version so you need to just create a wifi connection wellenreiter found after stopping the sniffer.  enter the information manually under config spec ess id and the name of the host wifi router (case sensitive).

2.  Trying to log into the host under wellenreiter totally locks up your system so do it mannually under network in the zaurus.
----------------------------------------------------------------------------

[TsingTao]

Thanks for the instructions 'Cresho', nice to have it all laid out.   I managed to get Wellenreiter working on my C1000 by gleaning tips and info from a bunch of other threads (I'm sure future noobs will be happy to only have to read 1 thread).

 But the way I did it, wellenreiter will only work for about a minute and then it dies.  It detects networks in the area for sure, but it only runs for a short time. I know others have encountered this problem before, and  I'm wondering if that happens using the method you've outlined.

 Just a little curious...


 Thanks again!

[seinfield]

i have a c700 working with Wellenreiter without running as root, and without a network profile. And no problems, never hangs, it works all the time.

Check the Wellenreiter that i am using: http://www.prodigyweb.net.mx/gilbertoalmaz...ellenreiter.rar

I use cacko rom.

[Kirin]

Hi Cresho,

I'm having problem on finding those packages, would you help please?
I mean I can't find the opie version of the wellenreiter

from the link above, I got the version for C7x0, is it going to be the same? Please bear with me as I'm a newbie on this packaging stuff

thanks


And I'm using a symbol wifi card, would it work as well?

[xamindar]

Hi Cresho,

I'm having problem on finding those packages, would you help please?
I mean I can't find the opie version of the wellenreiter

from the link above, I got the version for C7x0, is it going to be the same? Please bear with me as I'm a newbie on this packaging stuff

thanks


And I'm using a symbol wifi card, would it work as well?
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

I'm pretty sure he is using this package:
[a href=\"http://www.zaurususergroup.org/modules.php?op=modload&name=UpDownload&file=index&req=viewsdownload&sid=22&min=40&orderby=titleA&show=10]http://www.zaurususergroup.org/modules.php...=titleA&show=10[/url]

Good luck getting it working!

[xamindar]

i have a c700 working with Wellenreiter without running as root, and without a network profile. And no problems, never hangs, it works all the time.

Check the Wellenreiter that i am using: http://www.prodigyweb.net.mx/gilbertoalmaz...ellenreiter.rar

I use cacko rom.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96684\"][{POST_SNAPBACK}][/a][/div]

Where the heck is an unrar utility for the zaurus?  I'm at work and can't dock it and am trying to get that package unrar'd.  Anyone have a quick link?

[xamindar]

i have a c700 working with Wellenreiter without running as root, and without a network profile. And no problems, never hangs, it works all the time.

Check the Wellenreiter that i am using: http://www.prodigyweb.net.mx/gilbertoalmaz...ellenreiter.rar

I use cacko rom.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96684\"][{POST_SNAPBACK}][/a][/div]

aww. thanks for the new link.  But same problem as before.
This doesn't make sense!!  It works for you and other people.  I am on a sharp rom just like the rest of you.

[seinfield]

It is weird!!

I use a C700 with a Symbol WIFI CF.
Cacko Lite version with the update.

Everytime i install Wellenreiter it works perfectly on my c700. No error´s, no need to create a network connection, no hangs. I sended the files to a memeber of  this forum and it worked for him.

Strange problems!!

[Kirin]

It is weird!!

I use a C700 with a Symbol WIFI CF.
Cacko Lite version with the update.

Everytime i install Wellenreiter it works perfectly on my c700. No error´s, no need to create a network connection, no hangs. I sended the files to a memeber of  this forum and it worked for him.

Strange problems!!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96754\"][{POST_SNAPBACK}][/a][/div]

I've no idea about the software also..... I can't get it working. Would it be related to the Symbol Wifi setup on C1000 in my case? Because C1000 doesn't recognize the Symbol card as a wlan, so some tweaks are needed to be made and make it work as a lan card instead, and set the ssid, wep and stuff on teh network.config file directly. So I'm not sure if it is the reason why I can't get Wellenreiter working....

Anybody who has C1000/Symbol Wifi can help?

[xamindar]

I've no idea about the software also..... I can't get it working. Would it be related to the Symbol Wifi setup on C1000 in my case? Because C1000 doesn't recognize the Symbol card as a wlan, so some tweaks are needed to be made and make it work as a lan card instead, and set the ssid, wep and stuff on teh network.config file directly. So I'm not sure if it is the reason why I can't get Wellenreiter working....

Anybody who has C1000/Symbol Wifi can help?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96799\"][{POST_SNAPBACK}][/a][/div]

Well I am using a DCF-650W card on a 5600 running watapon rom so my setup is totally different and I have the same problem.  So who knows.


Also, the following errors are printed in the console when I run it:
bash-2.05# ./wellenreiter
checking: eth0
Changing scheme from 'CardSuspend' to 'qpewlan4'...
SIOCSIFFLAGS: No such device
wlanctl-ng: Network is down
mibget failed.
Some devices did not start cleanly.
OGlobal::creating global configuration instance.
OConfig::OConfig()            

and so on.  what is "SIOCSIFFLAGS: No such device" and "mibget failed."?

[Cresho]

i updated using the new file found on the rar..still problems but better than the old one.

[wizzard]

Is it possible to get Wellenreiter to work at all with the SL-5600? When I try to install it doesn't even recognize the ipk. I am using the (what I assume) latest build Downloaded from the Wellenreiter homepage and am running Watapon.


[Oops! Have to remember to edit sig]

[Cresho]

not sure at all since i do not own a sl-5600

[xamindar]

Is it possible to get Wellenreiter to work at all with the SL-5600? When I try to install it doesn't even recognize the ipk. I am using the (what I assume) latest build Downloaded from the Wellenreiter homepage and am running Watapon.


[Oops! Have to remember to edit sig]
[div align=\"right\"][a href=\"index.php?act=findpost&pid=111363\"][{POST_SNAPBACK}][/a][/div]

no it doesn't work with the 5600.

[deluxe]

here you go. The tutorial i promised.

if you have problems, post it and if you have solutions, post it.

Let me know if it helps...ill check up on this in a bit.
------------------------------------------------------------------------------------------
install

libpcap0_0.7.2-20031220_arm.ipk
libopie1_1.1.0-20031220_arm.ipk
libopie2_1.8.2-20031220_arm.ipk
wellenreiter_1.0.2-sl-c7x0-6_arm.ipk

then go to applications or were it installed the icon on palmtop
hold icon, extra menu pops up and down and disable root

Once that is done create a network profile as follows:
______________________________________________________

_______
Account
Name: wellenreiter

Config
Non-Spec ESS-ID: "ANY" (unticked)
ESS-ID: any
Network Type: 802.11 Ad-Hoc

WEP
Key Type: Disabled

PPoE
Use PPoE Authentication (unticked)

WEB Auth
Use WEB Authentication (unticked)

TCP/IP
Obtain TCP/IP information Automatically

(unticked)
IP Address: 10.1.0.2
Subnet Mask: 255.0.0.0
Gateway: 10.1.0.1

DNS
Auto-detect name servers (unticked)
Primary DNS: 10.1.0.1
Secondary DNS:
Default domain: (leave empty)

Proxy
No proxy
______________________________________________________

_______

after all that mess, all you need to to from now on

is...
start wellenreiter and then connect to this network which is wellenreiter from the
network applet in the taskbar.  click on sniffer and hit start. You should
connect by then. If not, you just need to tweak it
according to your wifi card. To stop it, hit sniffer
and stop. Then you have a list of wifi spots.  create a network  mannually under network and you can log into it with the ess id that you gained.

problems.

1.  you can't join a network from wellenreiter for this version so you need to just create a wifi connection wellenreiter found after stopping the sniffer.  enter the information manually under config spec ess id and the name of the host wifi router (case sensitive).

2.  Trying to log into the host under wellenreiter totally locks up your system so do it mannually under network in the zaurus.
----------------------------------------------------------------------------
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95751\"][{POST_SNAPBACK}][/a][/div]

Well, I have it all working as per my sig setup. With regards to "problem 1" above:
1...I can join a network from Wellenreiter. It takes about 4 secs to finish the association, during which the screen also goes temporarily black(a little unnerving).