← previous next →
Pages: [1]

Author Topic: Nand Hdd Restore  (Read 4514 times)

Whizard72

  • Newbie
  • *
  • Posts: 4
    • View Profile
Nand Hdd Restore
« on: September 26, 2005, 12:10:02 pm »
I did a NAND flash and HDD restore, the flash worked fine but the HDD restore comes up with a bad sector ... How do I recover from this?

Help Appreciated!

-Kevin
Logged

GadgetGuy

  • Sr. Member
  • ****
  • Posts: 321
    • View Profile
    • http://
Nand Hdd Restore
« Reply #1 on: September 26, 2005, 02:00:25 pm »
Quote
I did a NAND flash and HDD restore, the flash worked fine but the HDD restore comes up with a bad sector ... How do I recover from this?

Help Appreciated!

-Kevin
[div align=\"right\"][a href=\"index.php?act=findpost&pid=97104\"][{POST_SNAPBACK}][/a][/div]

Do a fsck ( OK + on when switching on after having the battery out for 5 secs; power supply plugged in, option 2 and option 2)
Logged
Zaurus C-3100 from PriceJapan with OZ 3.5.4.1. Opie and GPE
Ambicom CF WL1100C Wifi Card and Symbol Wireless Networker CF Wifi Card
1 GB Sandisk Ultra II SD
PdAir leather case - Nintendo DS metal case
various smaller CF and SD cards
all kinds of USB cables and accessories
-------------------------------------------------------------
Previous computers: TI 99/4A, ZX81, C64, Amiga 500, Apple Powerbook 100
Previous PDA's: Palm 1000, Palm III, Palm V, Palm Vx, Audiovox Maestro Pocket PC, Psion 5mx
Current PDA: Palm Tungsten E2
Current favourite: Zaurus C3100 - my "micro laptop"

Whizard72

  • Newbie
  • *
  • Posts: 4
    • View Profile
Nand Hdd Restore
« Reply #2 on: September 26, 2005, 04:23:52 pm »
Quote
Quote
I did a NAND flash and HDD restore, the flash worked fine but the HDD restore comes up with a bad sector ... How do I recover from this?

Help Appreciated!

-Kevin
[div align=\"right\"][a href=\"index.php?act=findpost&pid=97104\"][{POST_SNAPBACK}][/a][/div]

Do a fsck ( OK + on when switching on after having the battery out for 5 secs; power supply plugged in, option 2 and option 2)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=97116\"][{POST_SNAPBACK}][/a][/div]

I did that... then..

Now checking HDD1....
fsck.ext3: Bad magic number in super-block while trying to open /dev/hdc1
/dev/hd1c:
superblock could not be read or does not describe correct ext2 filesystem.

Now checking HDD2...
fsck.ext3: invalid argument while trying to open /dev/hdc2
superblock could not be read or does not describe correct ext2 filesystem.

Now checking HDD3
mount: mounting /dev/hdc3 on /hdd3 failed: Invalid Argument
Format Error!

File system errors left uncorrected.


So now what?
Logged

GadgetGuy

  • Sr. Member
  • ****
  • Posts: 321
    • View Profile
    • http://
Nand Hdd Restore
« Reply #3 on: September 26, 2005, 05:00:48 pm »
What did you do before the NAND restore?

Does your Zaurus boot up properly?

Did you try sudo fdisk -l to check what file system is on the HD partitions?

Maybe you can try re-partitioning / formatting and then fsck again?
Logged
Zaurus C-3100 from PriceJapan with OZ 3.5.4.1. Opie and GPE
Ambicom CF WL1100C Wifi Card and Symbol Wireless Networker CF Wifi Card
1 GB Sandisk Ultra II SD
PdAir leather case - Nintendo DS metal case
various smaller CF and SD cards
all kinds of USB cables and accessories
-------------------------------------------------------------
Previous computers: TI 99/4A, ZX81, C64, Amiga 500, Apple Powerbook 100
Previous PDA's: Palm 1000, Palm III, Palm V, Palm Vx, Audiovox Maestro Pocket PC, Psion 5mx
Current PDA: Palm Tungsten E2
Current favourite: Zaurus C3100 - my "micro laptop"

bam

  • Hero Member
  • *****
  • Posts: 1213
    • View Profile
    • http://thegrinder.ws
Nand Hdd Restore
« Reply #4 on: September 26, 2005, 09:13:30 pm »
need to goto single user mode then get the contents for your hdd from a post in the forums here "HDD1 Contents" then follow the instructions in the file, cant remember if its a zip or tarball. I had the same issue, its a booger to fix but its fixable. DONT DO A NAND RESTORE. This is not needed.

i think single user mode is d+b power on.
Logged
SL-C3100 current: Stock/Tetsu 18h
Socket BT CF Card
Linksys WCF-12 802.11b/Cheapie USB Ethernet

The Grinder

Whizard72

  • Newbie
  • *
  • Posts: 4
    • View Profile
Nand Hdd Restore
« Reply #5 on: September 27, 2005, 12:47:26 am »
Quote
What did you do before the NAND restore?

Does your Zaurus boot up properly?

Did you try sudo fdisk -l to check what file system is on the HD partitions?

Maybe you can try re-partitioning / formatting and then fsck again?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=97133\"][{POST_SNAPBACK}][/a][/div]

Well let's see, I attempted OpenBSD which didn't work out and then OpenZaurus which didn't quite make it, then I did the NAND flash restore which seemed to work fine then did HDD restore which came up with a sector error yet when I test the HDD it works fine.

When booting the Zaurus it says:

HDD1 Error!!
Logged

Whizard72

  • Newbie
  • *
  • Posts: 4
    • View Profile
Nand Hdd Restore
« Reply #6 on: September 27, 2005, 02:51:39 am »
OKAY... I got the Zaurus back up and running with the HDD1 restore file from www.xlfag.com/zaurus/

Only problem is I'm in japanese now... I know there's a MCCONVERT pkg, but the above-mentioned website says I can download a file from trisoft and use that. Well, I put the file on my CF card under the Backup_Files folder.. tried to do the restore on the settings menu and it came up with a dialog (probably error since just had an ok button) and did nothing.

All I need is what to do to put the english on and I'm set... so what do I do?
Logged

bam

  • Hero Member
  • *****
  • Posts: 1213
    • View Profile
    • http://thegrinder.ws
Nand Hdd Restore
« Reply #7 on: September 27, 2005, 04:29:17 am »
goto, trisoft.de and get thier backup file then use backup/restore to restore it to english
Logged
SL-C3100 current: Stock/Tetsu 18h
Socket BT CF Card
Linksys WCF-12 802.11b/Cheapie USB Ethernet

The Grinder

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Nand Hdd Restore
« Reply #8 on: September 27, 2005, 07:01:48 am »
Quote
OKAY... I got the Zaurus back up and running with the HDD1 restore file from www.xlfag.com/zaurus/

Only problem is I'm in japanese now... I know there's a MCCONVERT pkg, but the above-mentioned website says I can download a file from trisoft and use that. Well, I put the file on my CF card under the Backup_Files folder.. tried to do the restore on the settings menu and it came up with a dialog (probably error since just had an ok button) and did nothing.

All I need is what to do to put the english on and I'm set... so what do I do?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=97180\"][{POST_SNAPBACK}][/a][/div]

Did you plug the power in? It was probably complaining about that.
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K
Pages: [1]
← previous next →