Author Topic: Kdepimpi For Rc12 On 3100  (Read 4783 times)

rsay

  • Newbie
  • *
  • Posts: 16
    • View Profile
Kdepimpi For Rc12 On 3100
« on: November 28, 2005, 07:33:17 pm »
Does someone have a version of kdepimpi that works on RC12 with a 3100?

I had version 2.2.3 working on rc12 test but I can't seem to get it going again. More specifically, kopi and pwmanager work fine but kapi gives an error message about not being able to find libmicrokabc_qtopia.so and libmicrokabc_sharpdtm.so

the lib files are present in /mnt/ide3/usr/lib  and they are symlinked to /usr/lib and /opt/kdepim

If you have it working I would appreciate information about what steps you took to install it:)

SashZ, could we please get this added to the 3100 feed for RC12 so this is easy? Is there a working version for a 3100 on RC12 in another feed?
c3100
pdaxrom 1.1.0beta1
linksys wcf12

desertrat

  • Hero Member
  • *****
  • Posts: 743
    • View Profile
    • http://
Kdepimpi For Rc12 On 3100
« Reply #1 on: November 28, 2005, 11:26:25 pm »
Quote
Does someone have a version of kdepimpi that works on RC12 with a 3100?

I'm using kdepim_2.2.3_armv5tel.ipk which was gotten from an attachment somewhere in this forum. Sorry you'll have to search for it  

Quote
I had version 2.2.3 working on rc12 test but I can't seem to get it going again. More specifically, kopi and pwmanager work fine but kapi gives an error message about not being able to find libmicrokabc_qtopia.so and libmicrokabc_sharpdtm.so

the lib files are present in /mnt/ide3/usr/lib  and they are symlinked to /usr/lib and /opt/kdepim

If you have it working I would appreciate information about what steps you took to install it:)

Where did you get your copy of kdepim from? If different from above then try the above. I don't remember having to do anything special, it just worked.

-- cheers
SL-C3100 / Ambicon WL1100C-CF / pdaXrom 1.1.0beta3 / IceWM

rsay

  • Newbie
  • *
  • Posts: 16
    • View Profile
Kdepimpi For Rc12 On 3100
« Reply #2 on: November 29, 2005, 01:00:03 am »
The copy was from the forums.

md5sum
2ec055c9cffa33c5839a8926dfa2a91d kdepimpi_2.2.3_armv5tel.ipk

I downloaded it and installed it as follows

ipkg -d ide3 install /mnt/ide3/Documents/Install_Files/kdepimpi_2.2.3_armv5tel.ipk

I also tried without the -d ide3

afterwards I get the following error:

KLibLoader::library could not find library: libmicrokabc_qtopia.so
KLibLoader::library could not find library: libmicrokabc_sharpdtm.so
KLibLoader::library could not find library: libmicrokabc_qtopia.so
KLibLoader::library could not find library: libmicrokabc_sharpdtm.so
KLibLoader::library could not find library: libmicrokabc_file.so
KRES::Factory::resource(): Factory creation failed for the library microkabc_file No resource available!!!
c3100
pdaxrom 1.1.0beta1
linksys wcf12

cattin

  • Newbie
  • *
  • Posts: 18
    • View Profile
Kdepimpi For Rc12 On 3100
« Reply #3 on: November 29, 2005, 03:12:21 am »
there are two problems with this version of kdepimpi I know of (they have all been reported in this forum):

1. kapi expects the libraries to be in a different place than kopi. simple links should solve this problem.

Code: [Select]
cd /opt/kdepimpi
ln -s /usr/lib/libmicrokabc* .

2. when you start kapi the window manager doesn't automatically show kapi's window. you can, however, activate it with ALT-TAB. I have seen this behaviour with MB, in fvwm it seems to work properly.

regards

danr

  • Full Member
  • ***
  • Posts: 138
    • View Profile
    • http://
Kdepimpi For Rc12 On 3100
« Reply #4 on: November 29, 2005, 06:15:25 am »
Quote
Does someone have a version of kdepimpi that works on RC12 with a 3100?

I've compiled 2.2.7 for RC12, on my SL-C860.  It contains kapi, kopi, kammu - see attachment.

Dan
SL-C860 running Debian EABI on top of Angstrom 2.6 kernel

clofland

  • Full Member
  • ***
  • Posts: 245
    • View Profile
    • http://www.lofland.net/
Kdepimpi For Rc12 On 3100
« Reply #5 on: November 29, 2005, 09:41:46 am »
Quote
I've compiled 2.2.7 for RC12, on my SL-C860.  It contains kapi, kopi, kammu - see attachment.

Thanks a million!

I wish we could get the developer to release pdaxrom versions of these so we don't have to keep compiling them at random.
[span style=\'font-size:14pt;line-height:100%\']C-760 pdaXrom 1.1.0beta3[/span]
- Sandisk UltraII 1GB SD card - Socket LP CF LAN card - Socket LP CF WLAN card - Socket CF Bluetooth Card Rev H -

rsay

  • Newbie
  • *
  • Posts: 16
    • View Profile
Kdepimpi For Rc12 On 3100
« Reply #6 on: November 29, 2005, 02:21:13 pm »
Quote
I've compiled 2.2.7 for RC12, on my SL-C860.  It contains kapi, kopi, kammu - see attachment.

This is very nice and it works. Interestingly, I get almost the exact same error message on startup about the libraries but the program seems to work:) This version starts normally for me without the start minimized bug described above. (no more alt-tab!)

Do you have pwmanager compiled? I juggle a million passwords and I dont feel safe keeping them unencrypted in the address book. Alternatively, could you tell us the stps that you took to compile the other programs so I can take a stab at it?
c3100
pdaxrom 1.1.0beta1
linksys wcf12

LadyBug

  • Jr. Member
  • **
  • Posts: 64
    • View Profile
    • http://
Kdepimpi For Rc12 On 3100
« Reply #7 on: December 03, 2005, 10:02:06 am »
Quote
Do you have pwmanager compiled? I juggle a million passwords and I dont feel safe keeping them unencrypted in the address book.

If the pwmanager angle doesn't work out, try PortaBase which can be found in the feed. I keep my passwords in a PortaBase database. PortaBase is also available for Windows, which is good.
C760, Symbol CF WiFi, Lexar 1GB SD, score of CFs
Currently running pdaXrom.

zautrix

  • Sr. Member
  • ****
  • Posts: 437
    • View Profile
    • http://www.pi-sync.net
Kdepimpi For Rc12 On 3100
« Reply #8 on: December 03, 2005, 11:05:35 am »
Quote
Quote
I've compiled 2.2.7 for RC12, on my SL-C860.  It contains kapi, kopi, kammu - see attachment.

Thanks a million!

I wish we could get the developer to release pdaxrom versions of these so we don't have to keep compiling them at random.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=105390\"][{POST_SNAPBACK}][/a][/div]


Hehe. Yes, why not?
I would like to give  pdaXrom a try.

But I would need a second Z to install pdaXrom and test Kx/Pi.
Does anybody have a spare Z 760/860 to give/sell it to me?

z.

cattin

  • Newbie
  • *
  • Posts: 18
    • View Profile
Kdepimpi For Rc12 On 3100
« Reply #9 on: December 04, 2005, 08:45:18 am »
As I need the password manager as well, I cross compiled the most recent version 2.2.7 of pim/pi. This ipkg contains kopi, kapi, kammu, pwmpi, and ompi. Beware that I changed one small thing. In particular I removed the sampling rate option '-r ...' when ko/pi calls 'playwave' in case of an alarm, as this option is not supported on my RC12's playwave.

regards, Philippe


PS: In a separate post I will describe my solution to the alarm problem for ko/pi on my 3100.

rsay

  • Newbie
  • *
  • Posts: 16
    • View Profile
Kdepimpi For Rc12 On 3100
« Reply #10 on: January 04, 2006, 03:43:23 pm »
cattin,

I just tested your compile of kdepimpi on the new 1.1.0beta1 release and it still works great.

Thanks
c3100
pdaxrom 1.1.0beta1
linksys wcf12

gromituk

  • Full Member
  • ***
  • Posts: 207
    • View Profile
Kdepimpi For Rc12 On 3100
« Reply #11 on: January 06, 2006, 07:56:48 pm »
Well done cattin.  Is the "14% constant CPU usage by KA/PI" issue still there?

cattin

  • Newbie
  • *
  • Posts: 18
    • View Profile
Kdepimpi For Rc12 On 3100
« Reply #12 on: January 07, 2006, 02:20:00 pm »
Quote
Well done cattin.  Is the "14% constant CPU usage by KA/PI" issue still there?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=109865\"][{POST_SNAPBACK}][/a][/div]

unfortunately this version of KA/PI still uses precious CPU resources even when idle.

Philippe

cmpayc13

  • Newbie
  • *
  • Posts: 18
    • View Profile
Kdepimpi For Rc12 On 3100
« Reply #13 on: January 07, 2006, 04:51:28 pm »
Hi All,

I still have the prob with kapi complaining about not existing libmicrokabc_sharpdtm.so and libmicrokabc_olaccess.so. The trick with symbolic link in /opt/kdepimpi seems to not work with beta1 (the is no /opt/kdepimpi, it's /opt/kdepim-2.2.7, ok). I created the symbolic links as described above, but kapi still cant find this libs.
Any idea to solve this is very appricated

Thanks a lot in advance

Best regards

Cmpayc

zautrix

  • Sr. Member
  • ****
  • Posts: 437
    • View Profile
    • http://www.pi-sync.net
Kdepimpi For Rc12 On 3100
« Reply #14 on: January 07, 2006, 05:59:04 pm »
Quote
Quote
Well done cattin.  Is the "14% constant CPU usage by KA/PI" issue still there?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=109865\"][{POST_SNAPBACK}][/a][/div]

unfortunately this version of KA/PI still uses precious CPU resources even when idle.

Philippe
[div align=\"right\"][a href=\"index.php?act=findpost&pid=109926\"][{POST_SNAPBACK}][/a][/div]


Strange.

I really have to figure out why that happens ...

z.