← previous next →
Pages: [1]

Author Topic: Cacko 1.23, Wellenreiter, C3100  (Read 4172 times)

xamindar

  • Hero Member
  • *****
  • Posts: 803
    • View Profile
    • http://www.radnimax.com
Cacko 1.23, Wellenreiter, C3100
« on: March 09, 2006, 01:42:16 pm »
Back on the JP sharp rom I could get wellenreiter working by creating an adhoc connection, enabling it, and then opening wellenreiter and it would scan.

But on the cacko rom when I enable the adhoc connection the LED on my wireless card just blinks forever and wellenreiter still says it can't open the interface.  On the JP rom the LED would blink a little and then go solid.

Has anyone gotten wellenreiter to work?
Logged
SL-C3100 happily Dualbooting Japanese Rom 1.02 and Debian Eabi
Replaced internal CF with 8gb seagate cf hard drive
Ambicom CF GPS
CyberPower battery powered USB hub
D-link DCF-650W (MAN THIS THING IS HUGE!!)

alijames

  • Newbie
  • *
  • Posts: 35
    • View Profile
    • http://
Cacko 1.23, Wellenreiter, C3100
« Reply #1 on: March 09, 2006, 05:17:02 pm »
Hi,

I had the opposite problems. Would not work on the Sharp ROM, but works most of the time on Cacko 1.23.

I just installed wellenreiter from the cacko feed, using the commandline 'ipkg install wellenreiter'. It installed the  dependancies as usual, and I did NOT create an Ad-Hoc connection.

Now, provided I remove my Netgear MA701 then re-insert it before starting Wellenreiter, it usually works (~7/10 of the time)

I do find quite often with all WLAN connections is that if I disconnect, then close the lid. When I power up again, I have the remove/re-insert the Netgear card before any WLAN connection will work.

Maybe some of the more code literate guys can help on this one...

Cheers,

Alistair

C3100, Cacko 1.23
Netgear MA701 WLAN
TrendNet 10/100 CF
Pegasus Based USB Ethernet card
Logged
Alistair James

C3100 PdaXii13 Akita (with Full Hdimage)
Ambicom CF WLAN
Pharos CF LAN
Socket CF Bluetooth
Kingston 2GB SD
ZTek USB->Serial

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Cacko 1.23, Wellenreiter, C3100
« Reply #2 on: March 09, 2006, 07:18:07 pm »
Quote
Hi,

I had the opposite problems. Would not work on the Sharp ROM, but works most of the time on Cacko 1.23.

I just installed wellenreiter from the cacko feed, using the commandline 'ipkg install wellenreiter'. It installed the  dependancies as usual, and I did NOT create an Ad-Hoc connection.

Now, provided I remove my Netgear MA701 then re-insert it before starting Wellenreiter, it usually works (~7/10 of the time)

I do find quite often with all WLAN connections is that if I disconnect, then close the lid. When I power up again, I have the remove/re-insert the Netgear card before any WLAN connection will work.

Maybe some of the more code literate guys can help on this one...

Cheers,

Alistair

C3100, Cacko 1.23
Netgear MA701 WLAN
TrendNet 10/100 CF
Pegasus Based USB Ethernet card
[div align=\"right\"][a href=\"index.php?act=findpost&pid=117821\"][{POST_SNAPBACK}][/a][/div]

The problem is that some CF cards behave properly and if the command cardctrl resume 0 is issued, the card resumes, but some cards don't. For those troublesome cards, you can do a cardctrl eject 0; cardctrl insert 0. Put it in a script under /etc/apm.d/resume.d
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

xamindar

  • Hero Member
  • *****
  • Posts: 803
    • View Profile
    • http://www.radnimax.com
Cacko 1.23, Wellenreiter, C3100
« Reply #3 on: March 09, 2006, 08:01:06 pm »
Well what do ya know!  The one from the cacko feed works like alijames said.   I was using the one that was in the zaurususergroup.org download section.  

it only starts from console though?  no icon?
« Last Edit: March 09, 2006, 08:02:27 pm by xamindar »
Logged
SL-C3100 happily Dualbooting Japanese Rom 1.02 and Debian Eabi
Replaced internal CF with 8gb seagate cf hard drive
Ambicom CF GPS
CyberPower battery powered USB hub
D-link DCF-650W (MAN THIS THING IS HUGE!!)

cmonex

  • Jr. Member
  • **
  • Posts: 92
    • View Profile
Cacko 1.23, Wellenreiter, C3100
« Reply #4 on: March 09, 2006, 08:43:53 pm »
my problem with wellenreiter: it starts up fine, asks me if i want to kill the dhcp client, i say yes, then i press scan and it scans... and finds nothing!    

heelp, this is the third wifi scanner ive tried, none seem to work (kismet, discoverer).

btw, card is dlink dcf660w and zaurus model is C760
« Last Edit: March 09, 2006, 08:44:19 pm by cmonex »
Logged

brashley46

  • Sr. Member
  • ****
  • Posts: 277
    • View Profile
    • http://brashley46.no-ip.info
Cacko 1.23, Wellenreiter, C3100
« Reply #5 on: March 10, 2006, 12:21:41 am »
I'm using the Wellenreiter II package from the CAcko feed; I created a network connection named Wellenreiter, specified ESSID as any on an Ad-Hoc network,TCP/IP set to IP address 1.1.1.1 , Subnet mask 255.255.255.0 , Gateway 1.1.1.0 ; DNS on autodetect. It works just great.  

I start that network connection, and then start Wellenreiter. You have to start that connection first. Tried that?

Quote
my problem with wellenreiter: it starts up fine, asks me if i want to kill the dhcp client, i say yes, then i press scan and it scans... and finds nothing!    

heelp, this is the third wifi scanner ive tried, none seem to work (kismet, discoverer).

btw, card is dlink dcf660w and zaurus model is C760
[div align=\"right\"][a href=\"index.php?act=findpost&pid=117835\"][{POST_SNAPBACK}][/a][/div]
Logged
B. Ross Ashley
http://brashley46.livejournal.com
http://brashley46.no-ip.info
Home desktops: Hewlett-Packard Kayak XM600 running Xandros Desktop Home Edition Premium (4.1), on a P3 Coppermine processor w/ 20G harddrive, 256 MB RAM; Abyss X2 server running on a local shop-built special with Intel Celeron 1.8GHz processor, 40G harddrive running Win XP Home SP2; and my wife's eMac running OS X3.9

Handheld: C860 running CACkO 1.23, with a Panasonic Class 2 1G SD card and a GXT 1G CF card; AmbiCom WL1100C-CF wifi card, and a CE-AG06 camera card.

cmonex

  • Jr. Member
  • **
  • Posts: 92
    • View Profile
Cacko 1.23, Wellenreiter, C3100
« Reply #6 on: March 23, 2006, 07:32:32 pm »
Quote
I'm using the Wellenreiter II package from the CAcko feed; I created a network connection named Wellenreiter, specified ESSID as any on an Ad-Hoc network,TCP/IP set to IP address 1.1.1.1 , Subnet mask 255.255.255.0 , Gateway 1.1.1.0 ; DNS on autodetect. It works just great. 

I start that network connection, and then start Wellenreiter. You have to start that connection first. Tried that?

thanks for your answer, noticed it only now  

i got it to work since then, didn't need this network connection though. (i'll experiment later, just to see what it is like  )
Logged
Pages: [1]
← previous next →